From: Emmanuel Grumbach Date: Thu, 24 Apr 2008 00:15:04 +0000 (-0700) Subject: iwlwifi: clean up register names and defines X-Git-Tag: MMI-PSA29.97-13-9~33552^2~491 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=038669e49c30867956a7fa0d06c6e0e72bb38fa8;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git iwlwifi: clean up register names and defines This patch cleans up and renames some of the SCD registers. It move SCD definitions into iwl-prhp.h file Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index 4f45093ab3ba..38627040ad59 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -1072,286 +1072,6 @@ enum { (IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) - -/********************* START TX SCHEDULER *************************************/ - -/** - * 4965 Tx Scheduler - * - * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs - * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in - * host DRAM. It steers each frame's Tx command (which contains the frame - * data) into one of up to 7 prioritized Tx DMA FIFO channels within the - * device. A queue maps to only one (selectable by driver) Tx DMA channel, - * but one DMA channel may take input from several queues. - * - * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: - * - * 0 -- EDCA BK (background) frames, lowest priority - * 1 -- EDCA BE (best effort) frames, normal priority - * 2 -- EDCA VI (video) frames, higher priority - * 3 -- EDCA VO (voice) and management frames, highest priority - * 4 -- Commands (e.g. RXON, etc.) - * 5 -- HCCA short frames - * 6 -- HCCA long frames - * 7 -- not used by driver (device-internal only) - * - * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to - * support 11n aggregation via EDCA DMA channels. - * - * The driver sets up each queue to work in one of two modes: - * - * 1) Scheduler-Ack, in which the scheduler automatically supports a - * block-ack (BA) window of up to 64 TFDs. In this mode, each queue - * contains TFDs for a unique combination of Recipient Address (RA) - * and Traffic Identifier (TID), that is, traffic of a given - * Quality-Of-Service (QOS) priority, destined for a single station. - * - * In scheduler-ack mode, the scheduler keeps track of the Tx status of - * each frame within the BA window, including whether it's been transmitted, - * and whether it's been acknowledged by the receiving station. The device - * automatically processes block-acks received from the receiving STA, - * and reschedules un-acked frames to be retransmitted (successful - * Tx completion may end up being out-of-order). - * - * The driver must maintain the queue's Byte Count table in host DRAM - * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. - * This mode does not support fragmentation. - * - * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. - * The device may automatically retry Tx, but will retry only one frame - * at a time, until receiving ACK from receiving station, or reaching - * retry limit and giving up. - * - * The command queue (#4) must use this mode! - * This mode does not require use of the Byte Count table in host DRAM. - * - * Driver controls scheduler operation via 3 means: - * 1) Scheduler registers - * 2) Shared scheduler data base in internal 4956 SRAM - * 3) Shared data in host DRAM - * - * Initialization: - * - * When loading, driver should allocate memory for: - * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. - * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory - * (1024 bytes for each queue). - * - * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4, the command queue, otherwise - * the driver can't issue commands!): - */ - -/** - * Max Tx window size is the max number of contiguous TFDs that the scheduler - * can keep track of at one time when creating block-ack chains of frames. - * Note that "64" matches the number of ack bits in a block-ack packet. - * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize - * SCD_CONTEXT_QUEUE_OFFSET(x) values. - */ -#define SCD_WIN_SIZE 64 -#define SCD_FRAME_LIMIT 64 - -/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ -#define SCD_START_OFFSET 0xa02c00 - -/* - * 4965 tells driver SRAM address for internal scheduler structs via this reg. - * Value is valid only after "Alive" response from uCode. - */ -#define SCD_SRAM_BASE_ADDR (SCD_START_OFFSET + 0x0) - -/* - * Driver may need to update queue-empty bits after changing queue's - * write and read pointers (indexes) during (re-)initialization (i.e. when - * scheduler is not tracking what's happening). - * Bit fields: - * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit - * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty - * NOTE: This register is not used by Linux driver. - */ -#define SCD_EMPTY_BITS (SCD_START_OFFSET + 0x4) - -/* - * Physical base address of array of byte count (BC) circular buffers (CBs). - * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. - * This register points to BC CB for queue 0, must be on 1024-byte boundary. - * Others are spaced by 1024 bytes. - * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. - * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). - * Bit fields: - * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. - */ -#define SCD_DRAM_BASE_ADDR (SCD_START_OFFSET + 0x10) - -/* - * Enables any/all Tx DMA/FIFO channels. - * Scheduler generates requests for only the active channels. - * Set this to 0xff to enable all 8 channels (normal usage). - * Bit fields: - * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 - */ -#define SCD_TXFACT (SCD_START_OFFSET + 0x1c) - -/* Mask to enable contiguous Tx DMA/FIFO channels between "lo" and "hi". */ -#define SCD_TXFACT_REG_TXFIFO_MASK(lo, hi) \ - ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -/* - * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. - * Initialized and updated by driver as new TFDs are added to queue. - * NOTE: If using Block Ack, index must correspond to frame's - * Start Sequence Number; index = (SSN & 0xff) - * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? - */ -#define SCD_QUEUE_WRPTR(x) (SCD_START_OFFSET + 0x24 + (x) * 4) - -/* - * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. - * For FIFO mode, index indicates next frame to transmit. - * For Scheduler-ACK mode, index indicates first frame in Tx window. - * Initialized by driver, updated by scheduler. - */ -#define SCD_QUEUE_RDPTR(x) (SCD_START_OFFSET + 0x64 + (x) * 4) - -/* - * Select which queues work in chain mode (1) vs. not (0). - * Use chain mode to build chains of aggregated frames. - * Bit fields: - * 31-16: Reserved - * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time - * NOTE: If driver sets up queue for chain mode, it should be also set up - * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). - */ -#define SCD_QUEUECHAIN_SEL (SCD_START_OFFSET + 0xd0) - -/* - * Select which queues interrupt driver when scheduler increments - * a queue's read pointer (index). - * Bit fields: - * 31-16: Reserved - * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled - * NOTE: This functionality is apparently a no-op; driver relies on interrupts - * from Rx queue to read Tx command responses and update Tx queues. - */ -#define SCD_INTERRUPT_MASK (SCD_START_OFFSET + 0xe4) - -/* - * Queue search status registers. One for each queue. - * Sets up queue mode and assigns queue to Tx DMA channel. - * Bit fields: - * 19-10: Write mask/enable bits for bits 0-9 - * 9: Driver should init to "0" - * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). - * Driver should init to "1" for aggregation mode, or "0" otherwise. - * 7-6: Driver should init to "0" - * 5: Window Size Left; indicates whether scheduler can request - * another TFD, based on window size, etc. Driver should init - * this bit to "1" for aggregation mode, or "0" for non-agg. - * 4-1: Tx FIFO to use (range 0-7). - * 0: Queue is active (1), not active (0). - * Other bits should be written as "0" - * - * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled - * via SCD_QUEUECHAIN_SEL. - */ -#define SCD_QUEUE_STATUS_BITS(x) (SCD_START_OFFSET + 0x104 + (x) * 4) - -/* Bit field positions */ -#define SCD_QUEUE_STTS_REG_POS_ACTIVE (0) -#define SCD_QUEUE_STTS_REG_POS_TXF (1) -#define SCD_QUEUE_STTS_REG_POS_WSL (5) -#define SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) - -/* Write masks */ -#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) -#define SCD_QUEUE_STTS_REG_MSK (0x0007FC00) - -/** - * 4965 internal SRAM structures for scheduler, shared with driver ... - * - * Driver should clear and initialize the following areas after receiving - * "Alive" response from 4965 uCode, i.e. after initial - * uCode load, or after a uCode load done for error recovery: - * - * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) - * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) - * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) - * - * Driver accesses SRAM via HBUS_TARG_MEM_* registers. - * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. - * All OFFSET values must be added to this base address. - */ - -/* - * Queue context. One 8-byte entry for each of 16 queues. - * - * Driver should clear this entire area (size 0x80) to 0 after receiving - * "Alive" notification from uCode. Additionally, driver should init - * each queue's entry as follows: - * - * LS Dword bit fields: - * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. - * - * MS Dword bit fields: - * 16-22: Frame limit. Driver should init to 10 (0xa). - * - * Driver should init all other bits to 0. - * - * Init must be done after driver receives "Alive" response from 4965 uCode, - * and when setting up queue for aggregation. - */ -#define SCD_CONTEXT_DATA_OFFSET 0x380 -#define SCD_CONTEXT_QUEUE_OFFSET(x) (SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) - -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) - -/* - * Tx Status Bitmap - * - * Driver should clear this entire area (size 0x100) to 0 after receiving - * "Alive" notification from uCode. Area is used only by device itself; - * no other support (besides clearing) is required from driver. - */ -#define SCD_TX_STTS_BITMAP_OFFSET 0x400 - -/* - * RAxTID to queue translation mapping. - * - * When queue is in Scheduler-ACK mode, frames placed in a that queue must be - * for only one combination of receiver address (RA) and traffic ID (TID), i.e. - * one QOS priority level destined for one station (for this wireless link, - * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit - * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK - * mode, the device ignores the mapping value. - * - * Bit fields, for each 16-bit map: - * 15-9: Reserved, set to 0 - * 8-4: Index into device's station table for recipient station - * 3-0: Traffic ID (tid), range 0-15 - * - * Driver should clear this entire area (size 32 bytes) to 0 after receiving - * "Alive" notification from uCode. To update a 16-bit map value, driver - * must read a dword-aligned value from device SRAM, replace the 16-bit map - * value of interest, and write the dword value back into device SRAM. - */ -#define SCD_TRANSLATE_TBL_OFFSET 0x500 - -/* Find translation table dword to read/write for given queue */ -#define SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ - ((SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) - -#define SCD_TXFIFO_POS_TID (0) -#define SCD_TXFIFO_POS_RA (4) -#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) - -/*********************** END TX SCHEDULER *************************************/ - static inline u8 iwl4965_hw_get_rate(__le32 rate_n_flags) { return le32_to_cpu(rate_n_flags) & 0xFF; @@ -1386,11 +1106,11 @@ static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array * in DRAM containing 256 Transmit Frame Descriptors (TFDs). */ -#define IWL4965_MAX_WIN_SIZE 64 -#define IWL4965_QUEUE_SIZE 256 -#define IWL4965_NUM_FIFOS 7 -#define IWL4965_MAX_NUM_QUEUES 16 - +#define IWL49_MAX_WIN_SIZE 64 +#define IWL49_QUEUE_SIZE 256 +#define IWL49_NUM_FIFOS 7 +#define IWL49_CMD_FIFO_NUM 4 +#define IWL49_NUM_QUEUES 16 /** * struct iwl4965_tfd_frame_data @@ -1521,10 +1241,10 @@ struct iwl4965_queue_byte_cnt_entry { * 4965 assumes tables are separated by 1024 bytes. */ struct iwl4965_sched_queue_byte_cnt_tbl { - struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL4965_QUEUE_SIZE + - IWL4965_MAX_WIN_SIZE]; + struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL49_QUEUE_SIZE + + IWL49_MAX_WIN_SIZE]; u8 dont_care[1024 - - (IWL4965_QUEUE_SIZE + IWL4965_MAX_WIN_SIZE) * + (IWL49_QUEUE_SIZE + IWL49_MAX_WIN_SIZE) * sizeof(__le16)]; } __attribute__ ((packed)); @@ -1554,7 +1274,7 @@ struct iwl4965_sched_queue_byte_cnt_tbl { */ struct iwl4965_shared { struct iwl4965_sched_queue_byte_cnt_tbl - queues_byte_cnt_tbls[IWL4965_MAX_NUM_QUEUES]; + queues_byte_cnt_tbls[IWL49_NUM_QUEUES]; __le32 rb_closed; /* __le32 rb_closed_stts_rb_num:12; */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index f5796b78f2d2..2b21edb757b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -47,7 +47,7 @@ /* module parameters */ static struct iwl_mod_params iwl4965_mod_params = { - .num_of_queues = IWL4965_MAX_NUM_QUEUES, + .num_of_queues = IWL49_NUM_QUEUES, .enable_qos = 1, .amsdu_size_8K = 1, /* the rest are 0 by default */ @@ -1164,11 +1164,11 @@ static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, /* Set up and activate */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (active << SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) | - (scd_retry << SCD_QUEUE_STTS_REG_POS_WSL) | - (scd_retry << SCD_QUEUE_STTS_REG_POS_SCD_ACK) | - SCD_QUEUE_STTS_REG_MSK); + (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | + (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | + (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | + (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | + IWL49_SCD_QUEUE_STTS_REG_MSK); txq->sched_retry = scd_retry; @@ -1182,7 +1182,7 @@ static const u16 default_queue_to_tx_fifo[] = { IWL_TX_FIFO_AC2, IWL_TX_FIFO_AC1, IWL_TX_FIFO_AC0, - IWL_CMD_FIFO_NUM, + IWL49_CMD_FIFO_NUM, IWL_TX_FIFO_HCCA_1, IWL_TX_FIFO_HCCA_2 }; @@ -1223,10 +1223,10 @@ int iwl4965_alive_notify(struct iwl_priv *priv) /* Clear 4965's internal Tx Scheduler data base */ priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR); - a = priv->scd_base_addr + SCD_CONTEXT_DATA_OFFSET; - for (; a < priv->scd_base_addr + SCD_TX_STTS_BITMAP_OFFSET; a += 4) + a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; + for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); - for (; a < priv->scd_base_addr + SCD_TRANSLATE_TBL_OFFSET; a += 4) + for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4) iwl_write_targ_mem(priv, a, 0); @@ -1248,18 +1248,18 @@ int iwl4965_alive_notify(struct iwl_priv *priv) /* Max Tx Window size for Scheduler-ACK mode */ iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i), - (SCD_WIN_SIZE << - SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), + (SCD_WIN_SIZE << + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); /* Frame limit */ iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i) + - sizeof(u32), - (SCD_FRAME_LIMIT << - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + + sizeof(u32), + (SCD_FRAME_LIMIT << + IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); } iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, @@ -1320,10 +1320,10 @@ static struct iwl_sensitivity_ranges iwl4965_sensitivity = { int iwl4965_hw_set_hw_params(struct iwl_priv *priv) { - if ((priv->cfg->mod_params->num_of_queues > IWL4965_MAX_NUM_QUEUES) || + if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) || (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { IWL_ERROR("invalid queues_num, should be between %d and %d\n", - IWL_MIN_NUM_QUEUES, IWL4965_MAX_NUM_QUEUES); + IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES); return -EINVAL; } @@ -2520,9 +2520,9 @@ static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, tfd_offset[txq->q.write_ptr], byte_cnt, len); /* If within first 64 entries, duplicate at end */ - if (txq->q.write_ptr < IWL4965_MAX_WIN_SIZE) + if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE) IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. - tfd_offset[IWL4965_QUEUE_SIZE + txq->q.write_ptr], + tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr], byte_cnt, len); } @@ -3646,8 +3646,8 @@ static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv, * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)| - (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); + (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)| + (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); } /** @@ -3812,10 +3812,10 @@ static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, u32 tbl_dw; u16 scd_q2ratid; - scd_q2ratid = ra_tid & SCD_QUEUE_RA_TID_MAP_RATID_MSK; + scd_q2ratid = ra_tid & IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK; tbl_dw_addr = priv->scd_base_addr + - SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); + IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr); @@ -3877,14 +3877,14 @@ static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id, /* Set up Tx window size and frame limit for this queue */ iwl_write_targ_mem(priv, - priv->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id), - (SCD_WIN_SIZE << SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), + (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), - (SCD_FRAME_LIMIT << SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) - & SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), + (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) + & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index c9cf8eef1a90..acac629386e0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -239,40 +239,284 @@ #define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C) #define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030) +/** + * Tx Scheduler + * + * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs + * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in + * host DRAM. It steers each frame's Tx command (which contains the frame + * data) into one of up to 7 prioritized Tx DMA FIFO channels within the + * device. A queue maps to only one (selectable by driver) Tx DMA channel, + * but one DMA channel may take input from several queues. + * + * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: + * + * 0 -- EDCA BK (background) frames, lowest priority + * 1 -- EDCA BE (best effort) frames, normal priority + * 2 -- EDCA VI (video) frames, higher priority + * 3 -- EDCA VO (voice) and management frames, highest priority + * 4 -- Commands (e.g. RXON, etc.) + * 5 -- HCCA short frames + * 6 -- HCCA long frames + * 7 -- not used by driver (device-internal only) + * + * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. + * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to + * support 11n aggregation via EDCA DMA channels. + * + * The driver sets up each queue to work in one of two modes: + * + * 1) Scheduler-Ack, in which the scheduler automatically supports a + * block-ack (BA) window of up to 64 TFDs. In this mode, each queue + * contains TFDs for a unique combination of Recipient Address (RA) + * and Traffic Identifier (TID), that is, traffic of a given + * Quality-Of-Service (QOS) priority, destined for a single station. + * + * In scheduler-ack mode, the scheduler keeps track of the Tx status of + * each frame within the BA window, including whether it's been transmitted, + * and whether it's been acknowledged by the receiving station. The device + * automatically processes block-acks received from the receiving STA, + * and reschedules un-acked frames to be retransmitted (successful + * Tx completion may end up being out-of-order). + * + * The driver must maintain the queue's Byte Count table in host DRAM + * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. + * This mode does not support fragmentation. + * + * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. + * The device may automatically retry Tx, but will retry only one frame + * at a time, until receiving ACK from receiving station, or reaching + * retry limit and giving up. + * + * The command queue (#4) must use this mode! + * This mode does not require use of the Byte Count table in host DRAM. + * + * Driver controls scheduler operation via 3 means: + * 1) Scheduler registers + * 2) Shared scheduler data base in internal 4956 SRAM + * 3) Shared data in host DRAM + * + * Initialization: + * + * When loading, driver should allocate memory for: + * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. + * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory + * (1024 bytes for each queue). + * + * After receiving "Alive" response from uCode, driver must initialize + * the scheduler (especially for queue #4, the command queue, otherwise + * the driver can't issue commands!): + */ + +/** + * Max Tx window size is the max number of contiguous TFDs that the scheduler + * can keep track of at one time when creating block-ack chains of frames. + * Note that "64" matches the number of ack bits in a block-ack packet. + * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize + * IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. + */ +#define SCD_WIN_SIZE 64 +#define SCD_FRAME_LIMIT 64 + +/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ +#define IWL49_SCD_START_OFFSET 0xa02c00 + +/* + * 4965 tells driver SRAM address for internal scheduler structs via this reg. + * Value is valid only after "Alive" response from uCode. + */ +#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x0) + +/* + * Driver may need to update queue-empty bits after changing queue's + * write and read pointers (indexes) during (re-)initialization (i.e. when + * scheduler is not tracking what's happening). + * Bit fields: + * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit + * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty + * NOTE: This register is not used by Linux driver. + */ +#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_START_OFFSET + 0x4) + +/* + * Physical base address of array of byte count (BC) circular buffers (CBs). + * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. + * This register points to BC CB for queue 0, must be on 1024-byte boundary. + * Others are spaced by 1024 bytes. + * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. + * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). + * Bit fields: + * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. + */ +#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x10) + +/* + * Enables any/all Tx DMA/FIFO channels. + * Scheduler generates requests for only the active channels. + * Set this to 0xff to enable all 8 channels (normal usage). + * Bit fields: + * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 + */ +#define IWL49_SCD_TXFACT (IWL49_SCD_START_OFFSET + 0x1c) + +/* Mask to enable contiguous Tx DMA/FIFO channels between "lo" and "hi". */ +#define SCD_TXFACT_REG_TXFIFO_MASK(lo, hi) \ + ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) + +/* + * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. + * Initialized and updated by driver as new TFDs are added to queue. + * NOTE: If using Block Ack, index must correspond to frame's + * Start Sequence Number; index = (SSN & 0xff) + * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? + */ +#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_START_OFFSET + 0x24 + (x) * 4) + +/* + * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. + * For FIFO mode, index indicates next frame to transmit. + * For Scheduler-ACK mode, index indicates first frame in Tx window. + * Initialized by driver, updated by scheduler. + */ +#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_START_OFFSET + 0x64 + (x) * 4) + +/* + * Select which queues work in chain mode (1) vs. not (0). + * Use chain mode to build chains of aggregated frames. + * Bit fields: + * 31-16: Reserved + * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time + * NOTE: If driver sets up queue for chain mode, it should be also set up + * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). + */ +#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_START_OFFSET + 0xd0) + +/* + * Select which queues interrupt driver when scheduler increments + * a queue's read pointer (index). + * Bit fields: + * 31-16: Reserved + * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled + * NOTE: This functionality is apparently a no-op; driver relies on interrupts + * from Rx queue to read Tx command responses and update Tx queues. + */ +#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_START_OFFSET + 0xe4) + +/* + * Queue search status registers. One for each queue. + * Sets up queue mode and assigns queue to Tx DMA channel. + * Bit fields: + * 19-10: Write mask/enable bits for bits 0-9 + * 9: Driver should init to "0" + * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). + * Driver should init to "1" for aggregation mode, or "0" otherwise. + * 7-6: Driver should init to "0" + * 5: Window Size Left; indicates whether scheduler can request + * another TFD, based on window size, etc. Driver should init + * this bit to "1" for aggregation mode, or "0" for non-agg. + * 4-1: Tx FIFO to use (range 0-7). + * 0: Queue is active (1), not active (0). + * Other bits should be written as "0" + * + * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled + * via SCD_QUEUECHAIN_SEL. + */ +#define IWL49_SCD_QUEUE_STATUS_BITS(x)\ + (IWL49_SCD_START_OFFSET + 0x104 + (x) * 4) + +/* Bit field positions */ +#define IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) +#define IWL49_SCD_QUEUE_STTS_REG_POS_TXF (1) +#define IWL49_SCD_QUEUE_STTS_REG_POS_WSL (5) +#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) + +/* Write masks */ +#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) +#define IWL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) + +/** + * 4965 internal SRAM structures for scheduler, shared with driver ... + * + * Driver should clear and initialize the following areas after receiving + * "Alive" response from 4965 uCode, i.e. after initial + * uCode load, or after a uCode load done for error recovery: + * + * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) + * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) + * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) + * + * Driver accesses SRAM via HBUS_TARG_MEM_* registers. + * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. + * All OFFSET values must be added to this base address. + */ + +/* + * Queue context. One 8-byte entry for each of 16 queues. + * + * Driver should clear this entire area (size 0x80) to 0 after receiving + * "Alive" notification from uCode. Additionally, driver should init + * each queue's entry as follows: + * + * LS Dword bit fields: + * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. + * + * MS Dword bit fields: + * 16-22: Frame limit. Driver should init to 10 (0xa). + * + * Driver should init all other bits to 0. + * + * Init must be done after driver receives "Alive" response from 4965 uCode, + * and when setting up queue for aggregation. + */ +#define IWL49_SCD_CONTEXT_DATA_OFFSET 0x380 +#define IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ + (IWL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) + +#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) +#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) +#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) +#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) + /* - * 4965 Tx Scheduler registers. - * Details are documented in iwl-4965-hw.h + * Tx Status Bitmap + * + * Driver should clear this entire area (size 0x100) to 0 after receiving + * "Alive" notification from uCode. Area is used only by device itself; + * no other support (besides clearing) is required from driver. */ -#define IWL49_SCD_BASE (PRPH_BASE + 0xa02c00) - -#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_BASE + 0x0) -#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_BASE + 0x4) -#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_BASE + 0x10) -#define IWL49_SCD_AIT (IWL49_SCD_BASE + 0x18) -#define IWL49_SCD_TXFACT (IWL49_SCD_BASE + 0x1c) -#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_BASE + 0x24 + (x) * 4) -#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_BASE + 0x64 + (x) * 4) -#define IWL49_SCD_SETQUEUENUM (IWL49_SCD_BASE + 0xa4) -#define IWL49_SCD_SET_TXSTAT_TXED (IWL49_SCD_BASE + 0xa8) -#define IWL49_SCD_SET_TXSTAT_DONE (IWL49_SCD_BASE + 0xac) -#define IWL49_SCD_SET_TXSTAT_NOT_SCHD (IWL49_SCD_BASE + 0xb0) -#define IWL49_SCD_DECREASE_CREDIT (IWL49_SCD_BASE + 0xb4) -#define IWL49_SCD_DECREASE_SCREDIT (IWL49_SCD_BASE + 0xb8) -#define IWL49_SCD_LOAD_CREDIT (IWL49_SCD_BASE + 0xbc) -#define IWL49_SCD_LOAD_SCREDIT (IWL49_SCD_BASE + 0xc0) -#define IWL49_SCD_BAR (IWL49_SCD_BASE + 0xc4) -#define IWL49_SCD_BAR_DW0 (IWL49_SCD_BASE + 0xc8) -#define IWL49_SCD_BAR_DW1 (IWL49_SCD_BASE + 0xcc) -#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_BASE + 0xd0) -#define IWL49_SCD_QUERY_REQ (IWL49_SCD_BASE + 0xd8) -#define IWL49_SCD_QUERY_RES (IWL49_SCD_BASE + 0xdc) -#define IWL49_SCD_PENDING_FRAMES (IWL49_SCD_BASE + 0xe0) -#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_BASE + 0xe4) -#define IWL49_SCD_INTERRUPT_THRESHOLD (IWL49_SCD_BASE + 0xe8) -#define IWL49_SCD_QUERY_MIN_FRAME_SIZE (IWL49_SCD_BASE + 0x100) -#define IWL49_SCD_QUEUE_STATUS_BITS(x) (IWL49_SCD_BASE + 0x104 + (x) * 4) - -/* SP SCD */ +#define IWL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 + +/* + * RAxTID to queue translation mapping. + * + * When queue is in Scheduler-ACK mode, frames placed in a that queue must be + * for only one combination of receiver address (RA) and traffic ID (TID), i.e. + * one QOS priority level destined for one station (for this wireless link, + * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit + * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK + * mode, the device ignores the mapping value. + * + * Bit fields, for each 16-bit map: + * 15-9: Reserved, set to 0 + * 8-4: Index into device's station table for recipient station + * 3-0: Traffic ID (tid), range 0-15 + * + * Driver should clear this entire area (size 32 bytes) to 0 after receiving + * "Alive" notification from uCode. To update a 16-bit map value, driver + * must read a dword-aligned value from device SRAM, replace the 16-bit map + * value of interest, and write the dword value back into device SRAM. + */ +#define IWL49_SCD_TRANSLATE_TBL_OFFSET 0x500 + +/* Find translation table dword to read/write for given queue */ +#define IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ + ((IWL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) + +#define IWL49_SCD_TXFIFO_POS_TID (0) +#define IWL49_SCD_TXFIFO_POS_RA (4) +#define IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) + +/* 5000 SCD */ #define IWL50_SCD_BASE (PRPH_BASE + 0xa02c00) #define IWL50_SCD_SRAM_BASE_ADDR (IWL50_SCD_BASE + 0x0) @@ -287,4 +531,6 @@ #define IWL50_SCD_INTERRUPT_MASK (IWL50_SCD_BASE + 0x108) #define IWL50_SCD_QUEUE_STATUS_BITS(x) (IWL50_SCD_BASE + 0x10c + (x) * 4) +/*********************** END TX SCHEDULER *************************************/ + #endif /* __iwl_prph_h__ */