From: Giuseppe CAVALLARO Date: Fri, 24 Jun 2016 13:16:26 +0000 (+0200) Subject: drivers: net: stmmac: add port selection programming X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=02e57b9d7c8ce9e403f15f48fb91dd6549aaf465;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git drivers: net: stmmac: add port selection programming In case of SGMII more, for example when a MAC2MAC connection is needed, the port selection bits (inside the MAC configuration registers) have to be programmed according to the link selected. So the patch adds a new DT parameter to pass the port selection and to programmed related PCS and CORE to use it. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 95816c5fc589..41b49e6075f5 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -47,6 +47,9 @@ Optional properties: supported by this device instance - snps,perfect-filter-entries: Number of perfect filter entries supported by this device instance +- snps,ps-speed: port selection speed that can be passed to the core when + PCS is supported. For example, this is used in case of SGMII + and MAC2MAC connection. - AXI BUS Mode parameters: below the list of all the parameters to program the AXI register inside the DMA module: - snps,lpi_en: enable Low Power Interface diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 51077a8dc1f5..2533b91f1421 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -531,6 +531,7 @@ struct mac_device_info { unsigned int rx_csum; unsigned int pcs; unsigned int pmt; + unsigned int ps; }; struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins, diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index 0d31f2f80d07..cbefe9e2207c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -46,6 +46,21 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu) if (mtu > 2000) value |= GMAC_CONTROL_JE; + if (hw->ps) { + value |= GMAC_CONTROL_TE; + + if (hw->ps == SPEED_1000) { + value &= ~GMAC_CONTROL_PS; + } else { + value |= GMAC_CONTROL_PS; + + if (hw->ps == SPEED_10) + value &= ~GMAC_CONTROL_FES; + else + value |= GMAC_CONTROL_FES; + } + } + writel(value, ioaddr + GMAC_CONTROL); /* Mask GMAC interrupts */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 747f3cf1e20b..df5580dcdfed 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -32,6 +32,21 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu) if (mtu > 2000) value |= GMAC_CONFIG_JE; + if (hw->ps) { + value |= GMAC_CONFIG_TE; + + if (hw->ps == SPEED_1000) { + value &= ~GMAC_CONFIG_PS; + } else { + value |= GMAC_CONFIG_PS; + + if (hw->ps == SPEED_10) + value &= ~GMAC_CONFIG_FES; + else + value |= GMAC_CONFIG_FES; + } + } + writel(value, ioaddr + GMAC_CONFIG); /* Mask GMAC interrupts */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index da2d9b5b740a..1e06173fc9d7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -380,7 +380,8 @@ static int stmmac_ethtool_setsettings(struct net_device *dev, spin_lock(&priv->lock); if (priv->hw->mac->pcs_ctrl_ane) - priv->hw->mac->pcs_ctrl_ane(priv->ioaddr, 1, 0, 0); + priv->hw->mac->pcs_ctrl_ane(priv->ioaddr, 1, + priv->hw->ps, 0); spin_unlock(&priv->lock); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6142fce9ffac..aab777c1ba33 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1666,6 +1666,19 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) if (priv->plat->bus_setup) priv->plat->bus_setup(priv->ioaddr); + /* PS and related bits will be programmed according to the speed */ + if (priv->hw->pcs) { + int speed = priv->plat->mac_port_sel_speed; + + if ((speed == SPEED_10) || (speed == SPEED_100) || + (speed == SPEED_1000)) { + priv->hw->ps = speed; + } else { + dev_warn(priv->device, "invalid port speed\n"); + priv->hw->ps = 0; + } + } + /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->hw, dev->mtu); @@ -1716,7 +1729,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) } if (priv->hw->pcs && priv->hw->mac->pcs_ctrl_ane) - priv->hw->mac->pcs_ctrl_ane(priv->hw, 1, 0, 0); + priv->hw->mac->pcs_ctrl_ane(priv->hw, 1, priv->hw->ps, 0); /* set TX ring length */ if (priv->hw->dma->set_tx_ring_len) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index a96714d34560..f7dfc0ae8e9c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -319,6 +319,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set."); } + of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed); + plat->axi = stmmac_axi_setup(pdev); return plat; diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 0507dbfbf63c..705840e0438f 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -141,5 +141,6 @@ struct plat_stmmacenet_data { struct stmmac_axi *axi; int has_gmac4; bool tso_en; + int mac_port_sel_speed; }; #endif