From: Bard Liao Date: Mon, 15 Dec 2014 07:42:34 +0000 (+0800) Subject: ASoC: rt5670: Keep sysclk on if JD func is used X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=026e73683ad5665a45b01ca1a221fa87e0e8e6fb;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ASoC: rt5670: Keep sysclk on if JD func is used System clock is necessary for rt5670 JD function. We assume system clock source will be set in machine driver. So there are two things left we should do in codec driver. 1. Set sysclk to codec internal clock in probe since machine driver may not do that before JD function is registered. 2. Power up PLL once sysclk source is switched to PLL. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 78d85de8af6f..0a027bc94399 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -2190,6 +2190,13 @@ static int rt5670_set_dai_sysclk(struct snd_soc_dai *dai, if (freq == rt5670->sysclk && clk_id == rt5670->sysclk_src) return 0; + if (rt5670->pdata.jd_mode) { + if (clk_id == RT5670_SCLK_S_PLL1) + snd_soc_dapm_force_enable_pin(&codec->dapm, "PLL1"); + else + snd_soc_dapm_disable_pin(&codec->dapm, "PLL1"); + snd_soc_dapm_sync(&codec->dapm); + } switch (clk_id) { case RT5670_SCLK_S_MCLK: reg_val |= RT5670_SCLK_SRC_MCLK; @@ -2628,6 +2635,10 @@ static int rt5670_i2c_probe(struct i2c_client *i2c, } if (rt5670->pdata.jd_mode) { + regmap_update_bits(rt5670->regmap, RT5670_GLB_CLK, + RT5670_SCLK_SRC_MASK, RT5670_SCLK_SRC_RCCLK); + rt5670->sysclk = 0; + rt5670->sysclk_src = RT5670_SCLK_S_RCCLK; regmap_update_bits(rt5670->regmap, RT5670_PWR_ANLG1, RT5670_PWR_MB, RT5670_PWR_MB); regmap_update_bits(rt5670->regmap, RT5670_PWR_ANLG2,