From: Carolyn Wyborny Date: Sat, 9 Nov 2013 12:52:14 +0000 (-0800) Subject: igb: Update link modes display in ethtool X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0123713957a1977fcb5fc93173122d8af58e0c2c;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git igb: Update link modes display in ethtool This patch fixes multiple problems in the link modes display in ethtool. Newer parts have more complicated methods to determine actual link capabilities. Older parts cannot communicate with their SFP modules. Finally, all the available defines are not displayed by ethtool. This updates the link modes to be as accurate as possible depending on what data is available to the driver at any given time. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index b918ba3640f9..b0f3666b1d7f 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -146,6 +146,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags; u32 status; + status = rd32(E1000_STATUS); if (hw->phy.media_type == e1000_media_type_copper) { ecmd->supported = (SUPPORTED_10baseT_Half | @@ -169,13 +170,22 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->transceiver = XCVR_INTERNAL; } else { ecmd->supported = (SUPPORTED_FIBRE | + SUPPORTED_1000baseKX_Full | SUPPORTED_Autoneg | SUPPORTED_Pause); - ecmd->advertising = ADVERTISED_FIBRE; - - if ((eth_flags->e1000_base_lx) || (eth_flags->e1000_base_sx)) { - ecmd->supported |= SUPPORTED_1000baseT_Full; - ecmd->advertising |= ADVERTISED_1000baseT_Full; + ecmd->advertising = (ADVERTISED_FIBRE | + ADVERTISED_1000baseKX_Full); + if (hw->mac.type == e1000_i354) { + if ((hw->device_id == + E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + ecmd->supported |= SUPPORTED_2500baseX_Full; + ecmd->supported &= + ~SUPPORTED_1000baseKX_Full; + ecmd->advertising |= ADVERTISED_2500baseX_Full; + ecmd->advertising &= + ~ADVERTISED_1000baseKX_Full; + } } if (eth_flags->e100_base_fx) { ecmd->supported |= SUPPORTED_100baseT_Full; @@ -187,35 +197,29 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->port = PORT_FIBRE; ecmd->transceiver = XCVR_EXTERNAL; } - if (hw->mac.autoneg != 1) ecmd->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause); - if (hw->fc.requested_mode == e1000_fc_full) + switch (hw->fc.requested_mode) { + case e1000_fc_full: ecmd->advertising |= ADVERTISED_Pause; - else if (hw->fc.requested_mode == e1000_fc_rx_pause) + break; + case e1000_fc_rx_pause: ecmd->advertising |= (ADVERTISED_Pause | ADVERTISED_Asym_Pause); - else if (hw->fc.requested_mode == e1000_fc_tx_pause) + break; + case e1000_fc_tx_pause: ecmd->advertising |= ADVERTISED_Asym_Pause; - else + break; + default: ecmd->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause); - - status = rd32(E1000_STATUS); - + } if (status & E1000_STATUS_LU) { - if (hw->mac.type == e1000_i354) { - if ((status & E1000_STATUS_2P5_SKU) && - !(status & E1000_STATUS_2P5_SKU_OVER)) { - ecmd->supported = SUPPORTED_2500baseX_Full; - ecmd->advertising = ADVERTISED_2500baseX_Full; - ecmd->speed = SPEED_2500; - } else { - ecmd->supported = SUPPORTED_1000baseT_Full; - ecmd->advertising = ADVERTISED_1000baseT_Full; - } + if ((status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + ecmd->speed = SPEED_2500; } else if (status & E1000_STATUS_SPEED_1000) { ecmd->speed = SPEED_1000; } else if (status & E1000_STATUS_SPEED_100) { @@ -232,7 +236,6 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->speed = -1; ecmd->duplex = -1; } - if ((hw->phy.media_type == e1000_media_type_fiber) || hw->mac.autoneg) ecmd->autoneg = AUTONEG_ENABLE;