From: Kalle Pokki Date: Wed, 1 Nov 2006 13:08:13 +0000 (+0200) Subject: [POWERPC] CPM_UART: Fix non-console initialisation X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0091cf5a6ae6e52fc95ceb53200975ef2c81c206;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [POWERPC] CPM_UART: Fix non-console initialisation The cpm_uart driver is initialised incorrectly, if there is a frame buffer console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to call cpm_uart_init_portdesc() and set_lineif() in this case. Signed-off-by: Kalle Pokki Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index a8f894c78194..69715e556506 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -88,7 +88,7 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ void cpm_line_cr_cmd(int line, int cmd); -int cpm_uart_init_portdesc(void); +int __init cpm_uart_init_portdesc(void); int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); void cpm_uart_freebuf(struct uart_cpm_port *pinfo); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 32fd8c83bd8e..7a3b97fdf8d1 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -1349,11 +1349,10 @@ static int cpm_uart_init(void) { pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n"); pr_info( "cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n"); -#ifndef CONFIG_SERIAL_CPM_CONSOLE - ret = cpm_uart_init_portdesc(); - if (ret) - return ret; -#endif + + /* Don't run this again, if the console driver did it already */ + if (cpm_uart_nr == 0) + cpm_uart_init_portdesc(); cpm_reg.nr = cpm_uart_nr; ret = uart_register_driver(&cpm_reg); @@ -1365,6 +1364,8 @@ static int cpm_uart_init(void) { int con = cpm_uart_port_map[i]; cpm_uart_ports[con].port.line = i; cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF; + if (cpm_uart_ports[con].set_lineif) + cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]); uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port); } diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 95afc37297a8..08e55fdc882a 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -184,7 +184,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) } /* Setup any dynamic params in the uart desc */ -int cpm_uart_init_portdesc(void) +int __init cpm_uart_init_portdesc(void) { pr_debug("CPM uart[-]:init portdesc\n");