[ARM] pxa/spitz: use generic GPIO API for SCOOP1/SCOOP2 GPIOs

Original patch from Dmitry Baryshkov's inital scoop gpio conversion
work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index d2fc22df0d7f86376773027b70169ba92efb27b3..e9b3d33daed63aab0c8e40b9af7d3ed5cb1fa4c8 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -16,6 +16,7 @@
 #endif
 
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 /* Spitz/Akita GPIOs */
 
@@ -107,6 +108,17 @@
 #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_SUS_SET     0
 
+#define SPITZ_SCP_GPIO_BASE    (NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN   (SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B                (SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON     (SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L      (SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R      (SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER    (SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE  (SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A                (SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8)
+
 /* Spitz Scoop Device (No. 2) GPIOs */
 /* Suspend States in comments */
 #define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
@@ -128,6 +140,16 @@
                              SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
 
+#define SPITZ_SCP2_GPIO_BASE           (NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON               (SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP         (SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_RESERVED_1          (SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2          (SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3          (SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4          (SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT      (SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON                (SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS            (SPITZ_SCP2_GPIO_BASE + 8)
 
 /* Spitz IRQ Definitions */
 

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 8b06b7a749df69aa5c7318de908084fc5be01433..290008296e1bb4d2825b02c15d0d5c7964dc0dae 100644 (file)
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -134,10 +134,11 @@ static struct resource spitz_scoop_resources[] = {
 };
 
 static struct scoop_config spitz_scoop_setup = {
-       .io_dir         = SPITZ_SCP_IO_DIR,
+       .io_dir         = SPITZ_SCP_IO_DIR,
        .io_out         = SPITZ_SCP_IO_OUT,
-       .suspend_clr = SPITZ_SCP_SUS_CLR,
-       .suspend_set = SPITZ_SCP_SUS_SET,
+       .suspend_clr    = SPITZ_SCP_SUS_CLR,
+       .suspend_set    = SPITZ_SCP_SUS_SET,
+       .gpio_base      = SPITZ_SCP_GPIO_BASE,
 };
 
 struct platform_device spitzscoop_device = {
@@ -162,10 +163,11 @@ static struct resource spitz_scoop2_resources[] = {
 };
 
 static struct scoop_config spitz_scoop2_setup = {
-       .io_dir         = SPITZ_SCP2_IO_DIR,
+       .io_dir         = SPITZ_SCP2_IO_DIR,
        .io_out         = SPITZ_SCP2_IO_OUT,
-       .suspend_clr = SPITZ_SCP2_SUS_CLR,
-       .suspend_set = SPITZ_SCP2_SUS_SET,
+       .suspend_clr    = SPITZ_SCP2_SUS_CLR,
+       .suspend_set    = SPITZ_SCP2_SUS_SET,
+       .gpio_base      = SPITZ_SCP2_GPIO_BASE,
 };
 
 struct platform_device spitzscoop2_device = {
@@ -187,7 +189,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
        unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
 
        if (new_cpr & 0x0007) {
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+               gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
                if (!(cpr & 0x0002) && !(cpr & 0x0004))
                        mdelay(5);
                if (device == SPITZ_PWR_CF)
@@ -203,7 +205,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
                if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
                        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
                        mdelay(1);
-                       reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+                       gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
                } else {
                        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
                }
@@ -283,16 +285,8 @@ static struct pxa2xx_spi_chip spitz_ads7846_chip = {
 static void spitz_notify_intensity(int intensity)
 {
        if (machine_is_spitz() || machine_is_borzoi()) {
-               /* Bit 5 is via SCOOP */
-               if (intensity & 0x0020)
-                       reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-               else
-                       set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-               if (intensity)
-                       set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-               else
-                       reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+               gpio_set_value(SPITZ_GPIO_BACKLIGHT_CONT, !(intensity & 0x20));
+               gpio_set_value(SPITZ_GPIO_BACKLIGHT_ON, intensity);
                return;
        }
 
@@ -515,12 +509,34 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
+static int spitz_irda_startup(struct device *dev)
+{
+       int rc;
+
+       rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+       if (rc)
+               goto err;
+
+       rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+       if (rc)
+               goto err_dir;
+
+       return 0;
+
+err_dir:
+       gpio_free(SPITZ_GPIO_IR_ON);
+err:
+       return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+       gpio_free(SPITZ_GPIO_IR_ON);
+}
+
 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 {
-       if (mode & IR_OFF)
-               set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
-       else
-               reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+       gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
        pxa2xx_transceiver_mode(dev, mode);
 }
 
@@ -536,8 +552,10 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
 #endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-       .transceiver_cap  = IR_SIRMODE | IR_OFF,
-       .transceiver_mode = spitz_irda_transceiver_mode,
+       .transceiver_cap        = IR_SIRMODE | IR_OFF,
+       .transceiver_mode       = spitz_irda_transceiver_mode,
+       .startup                = spitz_irda_startup,
+       .shutdown               = spitz_irda_shutdown,
 };
 
 

diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8a40505dfd28b8081da8199ff02c31a8d87186d4..53018db106ac278cc5a1d3f7c08ad8a4862967e6 100644 (file)
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
@@ -48,44 +47,35 @@ static void spitz_charger_init(void)
 
 static void spitz_measure_temp(int on)
 {
-       if (on)
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
-       else
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+       gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
 }
 
 static void spitz_charge(int on)
 {
        if (on) {
                if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
-                       set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-                       reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+                       gpio_set_value(SPITZ_GPIO_JK_B, 1);
+                       gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
                } else {
-                       reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-                       reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+                       gpio_set_value(SPITZ_GPIO_JK_B, 0);
+                       gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
                }
        } else {
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+               gpio_set_value(SPITZ_GPIO_JK_B, 0);
+               gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
        }
 }
 
 static void spitz_discharge(int on)
 {
-       if (on)
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
-       else
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+       gpio_set_value(SPITZ_GPIO_JK_A, on);
 }
 
 /* HACK - For unknown reasons, accurate voltage readings are only made with a load
    on the power bus which the green led on spitz provides */
 static void spitz_discharge1(int on)
 {
-       if (on)
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
-       else
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+       gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
 static void spitz_presuspend(void)

diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 37cb768fc933d377647f89b92d8c999efeaf2393..acfa712844e2a5d539a589f5dd5637f8c50aa446 100644 (file)
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -19,13 +19,13 @@
 #include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
 #include <mach/pxa-regs.h>
 #include <mach/hardware.h>
 #include <mach/akita.h>
@@ -63,8 +63,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
                snd_soc_dapm_disable_pin(codec, "Mic Jack");
                snd_soc_dapm_disable_pin(codec, "Line Jack");
                snd_soc_dapm_enable_pin(codec, "Headphone Jack");
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+               gpio_set_value(SPITZ_GPIO_MUTE_L, 1);
+               gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
                break;
        case SPITZ_MIC:
                /* enable mic jack and bias, mute hp */
@@ -72,8 +72,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
                snd_soc_dapm_disable_pin(codec, "Headset Jack");
                snd_soc_dapm_disable_pin(codec, "Line Jack");
                snd_soc_dapm_enable_pin(codec, "Mic Jack");
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+               gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+               gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
                break;
        case SPITZ_LINE:
                /* enable line jack, disable mic bias and mute hp */
@@ -81,8 +81,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
                snd_soc_dapm_disable_pin(codec, "Headset Jack");
                snd_soc_dapm_disable_pin(codec, "Mic Jack");
                snd_soc_dapm_enable_pin(codec, "Line Jack");
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+               gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+               gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
                break;
        case SPITZ_HEADSET:
                /* enable and unmute headset jack enable mic bias, mute L hp */
@@ -90,8 +90,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
                snd_soc_dapm_enable_pin(codec, "Mic Jack");
                snd_soc_dapm_disable_pin(codec, "Line Jack");
                snd_soc_dapm_enable_pin(codec, "Headset Jack");
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
-               set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+               gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+               gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
                break;
        case SPITZ_HP_OFF:
 
@@ -100,8 +100,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
                snd_soc_dapm_disable_pin(codec, "Headset Jack");
                snd_soc_dapm_disable_pin(codec, "Mic Jack");
                snd_soc_dapm_disable_pin(codec, "Line Jack");
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
-               reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+               gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+               gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
                break;
        }
        snd_soc_dapm_sync(codec);
@@ -215,14 +215,9 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol,
 static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
        struct snd_kcontrol *k, int event)
 {
-       if (machine_is_borzoi() || machine_is_spitz()) {
-               if (SND_SOC_DAPM_EVENT_ON(event))
-                       set_scoop_gpio(&spitzscoop2_device.dev,
-                               SPITZ_SCP2_MIC_BIAS);
-               else
-                       reset_scoop_gpio(&spitzscoop2_device.dev,
-                               SPITZ_SCP2_MIC_BIAS);
-       }
+       if (machine_is_borzoi() || machine_is_spitz())
+               gpio_set_value(SPITZ_GPIO_MIC_BIAS,
+                               SND_SOC_DAPM_EVENT_ON(event));
 
        if (machine_is_akita()) {
                if (SND_SOC_DAPM_EVENT_ON(event))