[MIPS] Separate performance counter interrupts
authorChris Dearman <chris@mips.com>
Thu, 24 May 2007 21:24:20 +0000 (22:24 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 14 Jun 2007 17:25:15 +0000 (18:25 +0100)
Support for performance counter overflow interrupt that is on a separate
interrupt from the timer.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/kernel/smp-mt.c
arch/mips/kernel/time.c
arch/mips/mips-boards/generic/time.c
arch/mips/oprofile/op_model_mipsxx.c

index 64b62bdfb4f62d46c3f5aa897bbfeec56e73b88b..b8fa7ddd78f6d76b0aae3aefc7b99966fc08db65 100644 (file)
@@ -129,13 +129,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
 
 static struct irqaction irq_resched = {
        .handler        = ipi_resched_interrupt,
-       .flags          = IRQF_DISABLED,
+       .flags          = IRQF_DISABLED|IRQF_PERCPU,
        .name           = "IPI_resched"
 };
 
 static struct irqaction irq_call = {
        .handler        = ipi_call_interrupt,
-       .flags          = IRQF_DISABLED,
+       .flags          = IRQF_DISABLED|IRQF_PERCPU,
        .name           = "IPI_call"
 };
 
@@ -275,10 +275,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
        setup_irq(cpu_ipi_resched_irq, &irq_resched);
        setup_irq(cpu_ipi_call_irq, &irq_call);
 
-       /* need to mark IPI's as IRQ_PER_CPU */
-       irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU;
        set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
-       irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU;
        set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
 }
 
@@ -326,8 +323,11 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
 
 void prom_init_secondary(void)
 {
+       /* Enable per-cpu interrupts */
+
+       /* This is Malta specific: IPI,performance and timer inetrrupts */
        write_c0_status((read_c0_status() & ~ST0_IM ) |
-                       (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7));
+                       (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
 }
 
 void prom_smp_finish(void)
index 751b4a18b1331f6c267a41c9a2215f2023c20ad0..7def1ff3da9492573508870c2f927af670aeaecc 100644 (file)
@@ -199,6 +199,30 @@ int (*perf_irq)(void) = null_perf_irq;
 EXPORT_SYMBOL(null_perf_irq);
 EXPORT_SYMBOL(perf_irq);
 
+/*
+ * Performance counter IRQ or -1 if shared with timer
+ */
+int mipsxx_perfcount_irq;
+EXPORT_SYMBOL(mipsxx_perfcount_irq);
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+static inline int handle_perf_irq (int r2)
+{
+       /*
+        * The performance counter overflow interrupt may be shared with the
+        * timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
+        * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+        * and we can't reliably determine if a counter interrupt has also
+        * happened (!r2) then don't check for a timer interrupt.
+        */
+       return (mipsxx_perfcount_irq < 0) &&
+               perf_irq() == IRQ_HANDLED &&
+               !r2;
+}
+
 asmlinkage void ll_timer_interrupt(int irq)
 {
        int r2 = cpu_has_mips_r2;
@@ -206,19 +230,13 @@ asmlinkage void ll_timer_interrupt(int irq)
        irq_enter();
        kstat_this_cpu.irqs[irq]++;
 
-       /*
-        * Suckage alert:
-        * Before R2 of the architecture there was no way to see if a
-        * performance counter interrupt was pending, so we have to run the
-        * performance counter interrupt handler anyway.
-        */
-       if (!r2 || (read_c0_cause() & (1 << 26)))
-               if (perf_irq())
-                       goto out;
+       if (handle_perf_irq(r2))
+               goto out;
 
-       /* we keep interrupt disabled all the time */
-       if (!r2 || (read_c0_cause() & (1 << 30)))
-               timer_interrupt(irq, NULL);
+       if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
+               goto out;
+
+       timer_interrupt(irq, NULL);
 
 out:
        irq_exit();
@@ -258,7 +276,7 @@ unsigned int mips_hpt_frequency;
 
 static struct irqaction timer_irqaction = {
        .handler = timer_interrupt,
-       .flags = IRQF_DISABLED,
+       .flags = IRQF_DISABLED | IRQF_PERCPU,
        .name = "timer",
 };
 
index b41db9e7ab1f5b98ae1ac3b83244c940a074d0cd..33432ea188fb1005e640317d0ceb6462643e9506 100644 (file)
@@ -53,9 +53,8 @@
 
 unsigned long cpu_khz;
 
-#define CPUCTR_IMASKBIT (0x100 << MIPSCPU_INT_CPUCTR)
-
 static int mips_cpu_timer_irq;
+extern int mipsxx_perfcount_irq;
 extern void smtc_timer_broadcast(int);
 
 static void mips_timer_dispatch(void)
@@ -63,6 +62,11 @@ static void mips_timer_dispatch(void)
        do_IRQ(mips_cpu_timer_irq);
 }
 
+static void mips_perf_dispatch(void)
+{
+       do_IRQ(mipsxx_perfcount_irq);
+}
+
 /*
  * Redeclare until I get around mopping the timer code insanity on MIPS.
  */
@@ -70,6 +74,24 @@ extern int null_perf_irq(void);
 
 extern int (*perf_irq)(void);
 
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+static inline int handle_perf_irq (int r2)
+{
+       /*
+        * The performance counter overflow interrupt may be shared with the
+        * timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
+        * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+        * and we can't reliably determine if a counter interrupt has also
+        * happened (!r2) then don't check for a timer interrupt.
+        */
+       return (mipsxx_perfcount_irq < 0) &&
+               perf_irq() == IRQ_HANDLED &&
+               !r2;
+}
+
 irqreturn_t mips_timer_interrupt(int irq, void *dev_id)
 {
        int cpu = smp_processor_id();
@@ -92,8 +114,7 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id)
         * We could be here due to timer interrupt,
         * perf counter overflow, or both.
         */
-       if (read_c0_cause() & (1 << 26))
-               perf_irq();
+       (void) handle_perf_irq(1);
 
        if (read_c0_cause() & (1 << 30)) {
                /*
@@ -115,19 +136,19 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id)
 #else /* CONFIG_MIPS_MT_SMTC */
        int r2 = cpu_has_mips_r2;
 
+       if (handle_perf_irq(r2))
+               goto out;
+
+       if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
+               goto out;
+
        if (cpu == 0) {
                /*
                 * CPU 0 handles the global timer interrupt job and process
                 * accounting resets count/compare registers to trigger next
                 * timer int.
                 */
-               if (!r2 || (read_c0_cause() & (1 << 26)))
-                       if (perf_irq())
-                               goto out;
-
-               /* we keep interrupt disabled all the time */
-               if (!r2 || (read_c0_cause() & (1 << 30)))
-                       timer_interrupt(irq, NULL);
+               timer_interrupt(irq, NULL);
        } else {
                /* Everyone else needs to reset the timer int here as
                   ll_local_timer_interrupt doesn't */
@@ -225,35 +246,82 @@ void __init mips_time_init(void)
        mips_scroll_message();
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
 {
+       return perf_irq();
+}
+
+static struct irqaction perf_irqaction = {
+       .handler = mips_perf_interrupt,
+       .flags = IRQF_DISABLED | IRQF_PERCPU,
+       .name = "performance",
+};
+
+void __init plat_perf_setup(struct irqaction *irq)
+{
+       int hwint = 0;
+       mipsxx_perfcount_irq = -1;
+
 #ifdef MSC01E_INT_BASE
        if (cpu_has_veic) {
-               set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
-               mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+               set_vi_handler (MSC01E_INT_PERFCTR, mips_perf_dispatch);
+               mipsxx_perfcount_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
        } else
 #endif
-       {
-               if (cpu_has_vint)
-                       set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
-               mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+       if (cpu_has_mips_r2) {
+               /*
+                * Read IntCtl.IPPCI to determine the performance
+                * counter interrupt
+                */
+               hwint = (read_c0_intctl () >> 26) & 7;
+               if (hwint != MIPSCPU_INT_CPUCTR) {
+                       if (cpu_has_vint)
+                               set_vi_handler (hwint, mips_perf_dispatch);
+                       mipsxx_perfcount_irq = MIPSCPU_INT_BASE + hwint;
+               }
+       }
+       if (mipsxx_perfcount_irq >= 0) {
+#ifdef CONFIG_MIPS_MT_SMTC
+               setup_irq_smtc(mipsxx_perfcount_irq, irq, 0x100 << hwint);
+#else
+               setup_irq(mipsxx_perfcount_irq, irq);
+#endif /* CONFIG_MIPS_MT_SMTC */
+#ifdef CONFIG_SMP
+               set_irq_handler(mipsxx_perfcount_irq, handle_percpu_irq);
+#endif
        }
+}
 
+void __init plat_timer_setup(struct irqaction *irq)
+{
+       int hwint = 0;
+       if (cpu_has_veic) {
+               set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
+               mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+       }
+       else {
+               if (cpu_has_mips_r2)
+                       /*
+                        * Read IntCtl.IPTI to determine the timer interrupt
+                        */
+                       hwint = (read_c0_intctl () >> 29) & 7;
+               else
+                       hwint = MIPSCPU_INT_CPUCTR;
+               if (cpu_has_vint)
+                       set_vi_handler (hwint, mips_timer_dispatch);
+               mips_cpu_timer_irq = MIPSCPU_INT_BASE + hwint;
+       }
 
        /* we are using the cpu counter for timer interrupts */
        irq->handler = mips_timer_interrupt;    /* we use our own handler */
 #ifdef CONFIG_MIPS_MT_SMTC
-       setup_irq_smtc(mips_cpu_timer_irq, irq, CPUCTR_IMASKBIT);
+       setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << hwint);
 #else
        setup_irq(mips_cpu_timer_irq, irq);
 #endif /* CONFIG_MIPS_MT_SMTC */
-
 #ifdef CONFIG_SMP
-       /* irq_desc(riptor) is a global resource, when the interrupt overlaps
-          on seperate cpu's the first one tries to handle the second interrupt.
-          The effect is that the int remains disabled on the second cpu.
-          Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
-       irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
        set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
 #endif
+
+       plat_perf_setup(&perf_irqaction);
 }
index 4f94fa261aae37a1fbe64e2000dd9b76a5bf2bec..1ea5c9c1010b19610943012838f5b9a00fdb5964 100644 (file)
@@ -177,7 +177,10 @@ static int mipsxx_perfcount_handler(void)
        unsigned int counters = op_model_mipsxx_ops.num_counters;
        unsigned int control;
        unsigned int counter;
-       int handled = 0;
+       int handled = IRQ_NONE;
+
+       if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
+               return handled;
 
        switch (counters) {
 #define HANDLE_COUNTER(n)                                              \
@@ -188,7 +191,7 @@ static int mipsxx_perfcount_handler(void)
                    (counter & M_COUNTER_OVERFLOW)) {                   \
                        oprofile_add_sample(get_irq_regs(), n);         \
                        w_c0_perfcntr ## n(reg.counter[n]);             \
-                       handled = 1;                                    \
+                       handled = IRQ_HANDLED;                          \
                }
        HANDLE_COUNTER(3)
        HANDLE_COUNTER(2)