ath9k: Use correct channel for RX packets

Accessing the current channel definition in mac80211
when processing RX packets is problematic because it
could have been updated when a scan is issued. Since a
channel change involves flushing the existing packets
in the RX queue before a chip-reset is done, they would
be processed using the wrong band/channel information.

To avoid this, use the current channel information
maintained in the driver.

Cc: stable@vger.kernel.org
Reported-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 6d643ca8c1a356d6c3a05e705069fc3f5b416844..f7cc5b37a18ff4b54fd7be877629107c9ba2f576 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -850,20 +850,15 @@ static int ath9k_process_rate(struct ath_common *common,
        enum ieee80211_band band;
        unsigned int i = 0;
        struct ath_softc __maybe_unused *sc = common->priv;
+       struct ath_hw *ah = sc->sc_ah;
 
-       band = hw->conf.chandef.chan->band;
+       band = ah->curchan->chan->band;
        sband = hw->wiphy->bands[band];
 
-       switch (hw->conf.chandef.width) {
-       case NL80211_CHAN_WIDTH_5:
+       if (IS_CHAN_QUARTER_RATE(ah->curchan))
                rxs->flag |= RX_FLAG_5MHZ;
-               break;
-       case NL80211_CHAN_WIDTH_10:
+       else if (IS_CHAN_HALF_RATE(ah->curchan))
                rxs->flag |= RX_FLAG_10MHZ;
-               break;
-       default:
-               break;
-       }
 
        if (rx_stats->rs_rate & 0x80) {
                /* HT rate */
@@ -1078,6 +1073,14 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 
        rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
 
+       /*
+        * This shouldn't happen, but have a safety check anyway.
+        */
+       if (WARN_ON(!ah->curchan)) {
+               ret = -EINVAL;
+               goto exit;
+       }
+
        if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
                ret =-EINVAL;
                goto exit;
@@ -1085,8 +1088,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 
        ath9k_process_rssi(common, hw, rx_stats, rx_status);
 
-       rx_status->band = hw->conf.chandef.chan->band;
-       rx_status->freq = hw->conf.chandef.chan->center_freq;
+       rx_status->band = ah->curchan->chan->band;
+       rx_status->freq = ah->curchan->chan->center_freq;
        rx_status->antenna = rx_stats->rs_antenna;
        rx_status->flag |= RX_FLAG_MACTIME_END;