Commit
6b88a32c7af6 upstream.
With ARM64_SW_TTBR0_PAN enabled, the exception entry code checks the
active ASID to decide whether user access was enabled (non-zero ASID)
when the exception was taken. On return from exception, if user access
was previously disabled, it re-instates TTBR0_EL1 from the per-thread
saved value (updated in switch_mm() or efi_set_pgd()).
Commit
7655abb95386 ("arm64: mm: Move ASID from TTBR0 to TTBR1") makes a
TTBR0_EL1 + ASID switching non-atomic. Subsequently, commit
27a921e75711
("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN") changes the
__uaccess_ttbr0_disable() function and asm macro to first write the
reserved TTBR0_EL1 followed by the ASID=0 update in TTBR1_EL1. If an
exception occurs between these two, the exception return code will
re-instate a valid TTBR0_EL1. Similar scenario can happen in
cpu_switch_mm() between setting the reserved TTBR0_EL1 and the ASID
update in cpu_do_switch_mm().
This patch reverts the entry.S check for ASID == 0 to TTBR0_EL1 and
disables the interrupts around the TTBR0_EL1 and ASID switching code in
__uaccess_ttbr0_disable(). It also ensures that, when returning from the
EFI runtime services, efi_set_pgd() doesn't leave a non-zero ASID in
TTBR1_EL1 by using uaccess_ttbr0_{enable,disable}.
The accesses to current_thread_info()->ttbr0 are updated to use
READ_ONCE/WRITE_ONCE.
As a safety measure, __uaccess_ttbr0_enable() always masks out any
existing non-zero ASID TTBR1_EL1 before writing in the new ASID.
Fixes:
27a921e75711 ("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN")
Acked-by: Will Deacon <will.deacon@arm.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
.macro __uaccess_ttbr0_disable, tmp1
mrs \tmp1, ttbr1_el1 // swapper_pg_dir
+ bic \tmp1, \tmp1, #TTBR_ASID_MASK
add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir
msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1
isb
sub \tmp1, \tmp1, #SWAPPER_DIR_SIZE
- bic \tmp1, \tmp1, #TTBR_ASID_MASK
msr ttbr1_el1, \tmp1 // set reserved ASID
isb
.endm
isb
.endm
- .macro uaccess_ttbr0_disable, tmp1
+ .macro uaccess_ttbr0_disable, tmp1, tmp2
alternative_if_not ARM64_HAS_PAN
+ save_and_disable_irq \tmp2 // avoid preemption
__uaccess_ttbr0_disable \tmp1
+ restore_irq \tmp2
alternative_else_nop_endif
.endm
alternative_else_nop_endif
.endm
#else
- .macro uaccess_ttbr0_disable, tmp1
+ .macro uaccess_ttbr0_disable, tmp1, tmp2
.endm
.macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3
/*
* These macros are no-ops when UAO is present.
*/
- .macro uaccess_disable_not_uao, tmp1
- uaccess_ttbr0_disable \tmp1
+ .macro uaccess_disable_not_uao, tmp1, tmp2
+ uaccess_ttbr0_disable \tmp1, \tmp2
alternative_if ARM64_ALT_PAN_NOT_UAO
SET_PSTATE_PAN(1)
alternative_else_nop_endif
if (mm != current->active_mm) {
/*
* Update the current thread's saved ttbr0 since it is
- * restored as part of a return from exception. Set
- * the hardware TTBR0_EL1 using cpu_switch_mm()
- * directly to enable potential errata workarounds.
+ * restored as part of a return from exception. Enable
+ * access to the valid TTBR0_EL1 and invoke the errata
+ * workaround directly since there is no return from
+ * exception when invoking the EFI run-time services.
*/
update_saved_ttbr0(current, mm);
- cpu_switch_mm(mm->pgd, mm);
+ uaccess_ttbr0_enable();
+ post_ttbr_update_workaround();
} else {
/*
* Defer the switch to the current thread's TTBR0_EL1
* until uaccess_enable(). Restore the current
* thread's saved ttbr0 corresponding to its active_mm
*/
- cpu_set_reserved_ttbr0();
+ uaccess_ttbr0_disable();
update_saved_ttbr0(current, current->active_mm);
}
}
else
ttbr = virt_to_phys(mm->pgd) | ASID(mm) << 48;
- task_thread_info(tsk)->ttbr0 = ttbr;
+ WRITE_ONCE(task_thread_info(tsk)->ttbr0, ttbr);
}
#else
static inline void update_saved_ttbr0(struct task_struct *tsk,
#define activate_mm(prev,next) switch_mm(prev, next, current)
void verify_cpu_asid_bits(void);
+void post_ttbr_update_workaround(void);
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
static inline void __uaccess_ttbr0_disable(void)
{
- unsigned long ttbr;
+ unsigned long flags, ttbr;
+ local_irq_save(flags);
ttbr = read_sysreg(ttbr1_el1);
+ ttbr &= ~TTBR_ASID_MASK;
/* reserved_ttbr0 placed at the end of swapper_pg_dir */
write_sysreg(ttbr + SWAPPER_DIR_SIZE, ttbr0_el1);
isb();
/* Set reserved ASID */
- ttbr &= ~TTBR_ASID_MASK;
write_sysreg(ttbr, ttbr1_el1);
isb();
+ local_irq_restore(flags);
}
static inline void __uaccess_ttbr0_enable(void)
* roll-over and an update of 'ttbr0'.
*/
local_irq_save(flags);
- ttbr0 = current_thread_info()->ttbr0;
+ ttbr0 = READ_ONCE(current_thread_info()->ttbr0);
/* Restore active ASID */
ttbr1 = read_sysreg(ttbr1_el1);
+ ttbr1 &= ~TTBR_ASID_MASK; /* safety measure */
ttbr1 |= ttbr0 & TTBR_ASID_MASK;
write_sysreg(ttbr1, ttbr1_el1);
isb();
alternative_else_nop_endif
.if \el != 0
- mrs x21, ttbr1_el1
+ mrs x21, ttbr0_el1
tst x21, #TTBR_ASID_MASK // Check for the reserved ASID
orr x23, x23, #PSR_PAN_BIT // Set the emulated PAN in the saved SPSR
b.eq 1f // TTBR0 access already disabled
b.mi 5f
uao_user_alternative 9f, strb, sttrb, wzr, x0, 0
5: mov x0, #0
- uaccess_disable_not_uao x2
+ uaccess_disable_not_uao x2, x3
ret
ENDPROC(__clear_user)
uaccess_enable_not_uao x3, x4, x5
add end, x0, x2
#include "copy_template.S"
- uaccess_disable_not_uao x3
+ uaccess_disable_not_uao x3, x4
mov x0, #0 // Nothing to copy
ret
ENDPROC(__arch_copy_from_user)
uaccess_enable_not_uao x3, x4, x5
add end, x0, x2
#include "copy_template.S"
- uaccess_disable_not_uao x3
+ uaccess_disable_not_uao x3, x4
mov x0, #0
ret
ENDPROC(raw_copy_in_user)
uaccess_enable_not_uao x3, x4, x5
add end, x0, x2
#include "copy_template.S"
- uaccess_disable_not_uao x3
+ uaccess_disable_not_uao x3, x4
mov x0, #0
ret
ENDPROC(__arch_copy_to_user)
isb
mov x0, #0
1:
- uaccess_ttbr0_disable x1
+ uaccess_ttbr0_disable x1, x2
ret
9:
mov x0, #-EFAULT
ENTRY(cpu_do_switch_mm)
mrs x2, ttbr1_el1
mmid x1, x1 // get mm->context.id
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+ bfi x0, x1, #48, #16 // set the ASID field in TTBR0
+#endif
bfi x2, x1, #48, #16 // set the ASID
msr ttbr1_el1, x2 // in TTBR1 (since TCR.A1 is set)
isb
/*
* Disable userspace access from kernel once the hyp call completed.
*/
- uaccess_ttbr0_disable x6
+ uaccess_ttbr0_disable x6, x7
ret
ENDPROC(privcmd_call);
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff