power: supply: add sbs-charger driver
authorNicolas Saenz Julienne <nicolas.saenz@prodys.net>
Tue, 20 Dec 2016 15:31:13 +0000 (16:31 +0100)
committerSebastian Reichel <sre@kernel.org>
Wed, 4 Jan 2017 21:01:00 +0000 (22:01 +0100)
This adds support for sbs-charger compilant chips as defined here:
http://sbs-forum.org/specs/sbc110.pdf

This was tested on a arm board connected to an LTC4100 battery charger
chip.

Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@prodys.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
drivers/power/supply/Kconfig
drivers/power/supply/Makefile
drivers/power/supply/sbs-charger.c [new file with mode: 0644]

index 76806a0be820ecd61bdc38f8577433f913981ce1..42877ff757b1969dfb01c8fc567dde5e3cbe4001 100644 (file)
@@ -164,6 +164,12 @@ config BATTERY_SBS
          Say Y to include support for SBS battery driver for SBS-compliant
          gas gauges.
 
+config CHARGER_SBS
+        tristate "SBS Compliant charger"
+        depends on I2C
+        help
+         Say Y to include support for SBS compilant battery chargers.
+
 config BATTERY_BQ27XXX
        tristate "BQ27xxx battery driver"
        help
index 36c599d9a495ccf6f329cd806efc2554c15154af..06d9ef5a61d8254cc8dbfb20350140e1c6ecd035 100644 (file)
@@ -31,6 +31,7 @@ obj-$(CONFIG_BATTERY_COLLIE)  += collie_battery.o
 obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
 obj-$(CONFIG_BATTERY_WM97XX)   += wm97xx_battery.o
 obj-$(CONFIG_BATTERY_SBS)      += sbs-battery.o
+obj-$(CONFIG_CHARGER_SBS)      += sbs-charger.o
 obj-$(CONFIG_BATTERY_BQ27XXX)  += bq27xxx_battery.o
 obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
 obj-$(CONFIG_BATTERY_DA9030)   += da9030_battery.o
diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c
new file mode 100644 (file)
index 0000000..353765a
--- /dev/null
@@ -0,0 +1,274 @@
+/*
+ * Copyright (c) 2016, Prodys S.L.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This adds support for sbs-charger compilant chips as defined here:
+ * http://sbs-forum.org/specs/sbc110.pdf
+ *
+ * Implemetation based on sbs-battery.c
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/of_gpio.h>
+#include <linux/bitops.h>
+
+#define SBS_CHARGER_REG_SPEC_INFO              0x11
+#define SBS_CHARGER_REG_STATUS                 0x13
+#define SBS_CHARGER_REG_ALARM_WARNING          0x16
+
+#define SBS_CHARGER_STATUS_CHARGE_INHIBITED    BIT(1)
+#define SBS_CHARGER_STATUS_RES_COLD            BIT(9)
+#define SBS_CHARGER_STATUS_RES_HOT             BIT(10)
+#define SBS_CHARGER_STATUS_BATTERY_PRESENT     BIT(14)
+#define SBS_CHARGER_STATUS_AC_PRESENT          BIT(15)
+
+#define SBS_CHARGER_POLL_TIME                  500
+
+struct sbs_info {
+       struct i2c_client               *client;
+       struct power_supply             *power_supply;
+       struct regmap                   *regmap;
+       struct delayed_work             work;
+       unsigned int                    last_state;
+};
+
+static int sbs_get_property(struct power_supply *psy,
+                           enum power_supply_property psp,
+                           union power_supply_propval *val)
+{
+       struct sbs_info *chip = power_supply_get_drvdata(psy);
+       unsigned int reg;
+
+       reg = chip->last_state;
+
+       switch (psp) {
+       case POWER_SUPPLY_PROP_PRESENT:
+               val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT);
+               break;
+
+       case POWER_SUPPLY_PROP_ONLINE:
+               val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT);
+               break;
+
+       case POWER_SUPPLY_PROP_STATUS:
+               val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+               if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT))
+                       val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+               else if (reg & SBS_CHARGER_STATUS_AC_PRESENT &&
+                        !(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED))
+                       val->intval = POWER_SUPPLY_STATUS_CHARGING;
+               else
+                       val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+               break;
+
+       case POWER_SUPPLY_PROP_HEALTH:
+               if (reg & SBS_CHARGER_STATUS_RES_COLD)
+                       val->intval = POWER_SUPPLY_HEALTH_COLD;
+               if (reg & SBS_CHARGER_STATUS_RES_HOT)
+                       val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+               else
+                       val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+               break;
+
+       default:
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int sbs_check_state(struct sbs_info *chip)
+{
+       unsigned int reg;
+       int ret;
+
+       ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &reg);
+       if (!ret && reg != chip->last_state) {
+               chip->last_state = reg;
+               power_supply_changed(chip->power_supply);
+               return 1;
+       }
+
+       return 0;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+       struct sbs_info *chip = container_of(work, struct sbs_info, work.work);
+
+       sbs_check_state(chip);
+
+       schedule_delayed_work(&chip->work,
+                             msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+}
+
+static irqreturn_t sbs_irq_thread(int irq, void *data)
+{
+       struct sbs_info *chip = data;
+       int ret;
+
+       ret = sbs_check_state(chip);
+
+       return ret ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static enum power_supply_property sbs_properties[] = {
+       POWER_SUPPLY_PROP_STATUS,
+       POWER_SUPPLY_PROP_PRESENT,
+       POWER_SUPPLY_PROP_ONLINE,
+       POWER_SUPPLY_PROP_HEALTH,
+};
+
+static bool sbs_readable_reg(struct device *dev, unsigned int reg)
+{
+       if (reg < SBS_CHARGER_REG_SPEC_INFO)
+               return false;
+       else
+               return true;
+}
+
+static bool sbs_volatile_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case SBS_CHARGER_REG_STATUS:
+               return true;
+       }
+
+       return false;
+}
+
+static const struct regmap_config sbs_regmap = {
+       .reg_bits       = 8,
+       .val_bits       = 16,
+       .max_register   = SBS_CHARGER_REG_ALARM_WARNING,
+       .readable_reg   = sbs_readable_reg,
+       .volatile_reg   = sbs_volatile_reg,
+       .val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
+};
+
+static const struct power_supply_desc sbs_desc = {
+       .name = "sbs-charger",
+       .type = POWER_SUPPLY_TYPE_MAINS,
+       .properties = sbs_properties,
+       .num_properties = ARRAY_SIZE(sbs_properties),
+       .get_property = sbs_get_property,
+};
+
+static int sbs_probe(struct i2c_client *client,
+                    const struct i2c_device_id *id)
+{
+       struct power_supply_config psy_cfg = {};
+       struct sbs_info *chip;
+       int ret, val;
+
+       chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+       if (!chip)
+               return -ENOMEM;
+
+       chip->client = client;
+       psy_cfg.of_node = client->dev.of_node;
+       psy_cfg.drv_data = chip;
+
+       i2c_set_clientdata(client, chip);
+
+       chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
+       if (IS_ERR(chip->regmap))
+               return PTR_ERR(chip->regmap);
+
+       /*
+        * Before we register, we need to make sure we can actually talk
+        * to the battery.
+        */
+       ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val);
+       if (ret) {
+               dev_err(&client->dev, "Failed to get device status\n");
+               return ret;
+       }
+       chip->last_state = val;
+
+       chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc,
+                                                       &psy_cfg);
+       if (IS_ERR(chip->power_supply)) {
+               dev_err(&client->dev, "Failed to register power supply\n");
+               return PTR_ERR(chip->power_supply);
+       }
+
+       /*
+        * The sbs-charger spec doesn't impose the use of an interrupt. So in
+        * the case it wasn't provided we use polling in order get the charger's
+        * status.
+        */
+       if (client->irq) {
+               ret = devm_request_threaded_irq(&client->dev, client->irq,
+                                       NULL, sbs_irq_thread,
+                                       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+                                       dev_name(&client->dev), chip);
+               if (ret) {
+                       dev_err(&client->dev, "Failed to request irq, %d\n", ret);
+                       return ret;
+               }
+       } else {
+               INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+               schedule_delayed_work(&chip->work,
+                                     msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+       }
+
+       dev_info(&client->dev,
+                "%s: smart charger device registered\n", client->name);
+
+       return 0;
+}
+
+static int sbs_remove(struct i2c_client *client)
+{
+       struct sbs_info *chip = i2c_get_clientdata(client);
+
+       cancel_delayed_work_sync(&chip->work);
+
+       return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbs_dt_ids[] = {
+       { .compatible = "sbs,sbs-charger" },
+       { },
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+       { "sbs-charger", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static struct i2c_driver sbs_driver = {
+       .probe          = sbs_probe,
+       .remove         = sbs_remove,
+       .id_table       = sbs_id,
+       .driver = {
+               .name   = "sbs-charger",
+               .of_match_table = of_match_ptr(sbs_dt_ids),
+       },
+};
+module_i2c_driver(sbs_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
+MODULE_DESCRIPTION("SBS smart charger driver");
+MODULE_LICENSE("GPL v2");