V4L/DVB (8991): Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards
authorIgor M. Liplianin <liplianin@me.by>
Mon, 8 Sep 2008 20:16:40 +0000 (17:16 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sun, 12 Oct 2008 11:37:04 +0000 (09:37 -0200)
Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards
This cards based on cx24116 demodulator.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/dw2102.c
drivers/media/dvb/dvb-usb/dw2102.h

index a4d898b44e55c40eb9cf5b7cccfdfe496cdcfa62..0f3f962b35bf78fd9895ab6b50f62a79b3755ee2 100644 (file)
@@ -1,4 +1,5 @@
-/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card
+/* DVB USB framework compliant Linux driver for the
+*      DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card
 *
 * Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
 *
 #include "dw2102.h"
 #include "stv0299.h"
 #include "z0194a.h"
+#include "cx24116.h"
 
 #ifndef USB_PID_DW2102
 #define USB_PID_DW2102 0x2102
 #endif
 
+#ifndef USB_PID_DW2104
+#define USB_PID_DW2104 0x2104
+#endif
+
 #define DW2102_READ_MSG 0
 #define DW2102_WRITE_MSG 1
 
 #define REG_1F_SYMBOLRATE_BYTE0 0x1f
 #define REG_20_SYMBOLRATE_BYTE1 0x20
 #define REG_21_SYMBOLRATE_BYTE2 0x21
-
+/* on my own*/
 #define DW2102_VOLTAGE_CTRL (0x1800)
 #define DW2102_RC_QUERY (0x1a00)
 
@@ -35,22 +41,27 @@ struct dw2102_rc_keys {
        u32 event;
 };
 
+/* debug */
+static int dvb_usb_dw2102_debug;
+module_param_named(debug, dvb_usb_dw2102_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS);
+
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
-               u8 *data, u16 len, int flags)
+                       u16 index, u8 * data, u16 len, int flags)
 {
        int ret;
        u8 u8buf[len];
 
        unsigned int pipe = (flags == DW2102_READ_MSG) ?
-               usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
+                               usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
        u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
 
        if (flags == DW2102_WRITE_MSG)
                memcpy(u8buf, data, len);
-       ret = usb_control_msg(dev, pipe, request,
-               request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000);
+       ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
+                               value, index , u8buf, len, 2000);
 
        if (flags == DW2102_READ_MSG)
                memcpy(data, u8buf, len);
@@ -65,7 +76,6 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 struct dvb_usb_device *d = i2c_get_adapdata(adap);
        int i = 0, ret = 0;
        u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
-       u8 request;
        u16 value;
 
        if (!d)
@@ -76,12 +86,11 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap);
        switch (num) {
        case 2:
                /* read stv0299 register */
-               request = 0xb5;
                value = msg[0].buf[0];/* register */
                for (i = 0; i < msg[1].len; i++) {
                        value = value + i;
-                       ret = dw2102_op_rw(d->udev, 0xb5,
-                               value, buf6, 2, DW2102_READ_MSG);
+                       ret = dw2102_op_rw(d->udev, 0xb5, value, 0,
+                                       buf6, 2, DW2102_READ_MSG);
                        msg[1].buf[i] = buf6[0];
 
                }
@@ -93,8 +102,8 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap);
                        buf6[0] = 0x2a;
                        buf6[1] = msg[0].buf[0];
                        buf6[2] = msg[0].buf[1];
-                       ret = dw2102_op_rw(d->udev, 0xb2,
-                               0, buf6, 3, DW2102_WRITE_MSG);
+                       ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
+                                       buf6, 3, DW2102_WRITE_MSG);
                        break;
                case 0x60:
                        if (msg[0].flags == 0) {
@@ -106,26 +115,26 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap);
                                buf6[4] = msg[0].buf[1];
                                buf6[5] = msg[0].buf[2];
                                buf6[6] = msg[0].buf[3];
-                               ret = dw2102_op_rw(d->udev, 0xb2,
-                               0, buf6, 7, DW2102_WRITE_MSG);
+                               ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
+                                               buf6, 7, DW2102_WRITE_MSG);
                        } else {
-                       /* write to tuner pll */
-                               ret = dw2102_op_rw(d->udev, 0xb5,
-                               0, buf6, 1, DW2102_READ_MSG);
+                       /* read from tuner */
+                               ret = dw2102_op_rw(d->udev, 0xb5, 0,0,
+                                               buf6, 1, DW2102_READ_MSG);
                                msg[0].buf[0] = buf6[0];
                        }
                        break;
                case (DW2102_RC_QUERY):
-                       ret  = dw2102_op_rw(d->udev, 0xb8,
-                               0, buf6, 2, DW2102_READ_MSG);
+                       ret  = dw2102_op_rw(d->udev, 0xb8, 0, 0,
+                                       buf6, 2, DW2102_READ_MSG);
                        msg[0].buf[0] = buf6[0];
                        msg[0].buf[1] = buf6[1];
                        break;
                case (DW2102_VOLTAGE_CTRL):
                        buf6[0] = 0x30;
                        buf6[1] = msg[0].buf[0];
-                       ret = dw2102_op_rw(d->udev, 0xb2,
-                               0, buf6, 2, DW2102_WRITE_MSG);
+                       ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
+                                       buf6, 2, DW2102_WRITE_MSG);
                        break;
                }
 
@@ -136,6 +145,88 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap);
        return num;
 }
 
+static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
+{
+       struct dvb_usb_device *d = i2c_get_adapdata(adap);
+       int ret = 0;
+       int len, i;
+
+       if (!d)
+               return -ENODEV;
+       if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+               return -EAGAIN;
+
+       switch (num) {
+       case 2: {
+               /* read */
+               /* first write first register number */
+               u8 ibuf [msg[1].len + 2], obuf[3];
+               obuf[0] = 0xaa;
+               obuf[1] = msg[0].len;
+               obuf[2] = msg[0].buf[0];
+               ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
+                               obuf, msg[0].len + 2, DW2102_WRITE_MSG);
+               /* second read registers */
+               ret = dw2102_op_rw(d->udev, 0xc3, 0xab , 0,
+                               ibuf, msg[1].len + 2, DW2102_READ_MSG);
+               memcpy(msg[1].buf, ibuf + 2, msg[1].len);
+
+               break;
+       }
+       case 1:
+               switch (msg[0].addr) {
+               case 0x55: {
+                       if (msg[0].buf[0] == 0xf7) {
+                               /* firmware */
+                               /* Write in small blocks */
+                               u8 obuf[19];
+                               obuf[0] = 0xaa;
+                               obuf[1] = 0x11;
+                               obuf[2] = 0xf7;
+                               len = msg[0].len - 1;
+                               i = 1;
+                               do {
+                                       memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len));
+                                       ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
+                                               obuf, (len > 16 ? 16 : len) + 3, DW2102_WRITE_MSG);
+                                       i += 16;
+                                       len -= 16;
+                               } while (len > 0);
+                       } else {
+                               /* write to register */
+                               u8 obuf[msg[0].len + 2];
+                               obuf[0] = 0xaa;
+                               obuf[1] = msg[0].len;
+                               memcpy(obuf + 2, msg[0].buf, msg[0].len);
+                               ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
+                                               obuf, msg[0].len + 2, DW2102_WRITE_MSG);
+                       }
+                       break;
+               }
+               case(DW2102_RC_QUERY): {
+                       u8 ibuf[2];
+                       ret  = dw2102_op_rw(d->udev, 0xb8, 0, 0,
+                                       ibuf, 2, DW2102_READ_MSG);
+                       memcpy(msg[0].buf, ibuf , 2);
+                       break;
+               }
+               case(DW2102_VOLTAGE_CTRL): {
+                       u8 obuf[2];
+                       obuf[0] = 0x30;
+                       obuf[1] = msg[0].buf[0];
+                       ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
+                                       obuf, 2, DW2102_WRITE_MSG);
+                       break;
+               }
+               }
+
+               break;
+       }
+
+       mutex_unlock(&d->i2c_mutex);
+       return num;
+}
+
 static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
 {
        return I2C_FUNC_I2C;
@@ -146,6 +237,34 @@ static struct i2c_algorithm dw2102_i2c_algo = {
        .functionality = dw2102_i2c_func,
 };
 
+static struct i2c_algorithm dw2104_i2c_algo = {
+       .master_xfer = dw2104_i2c_transfer,
+       .functionality = dw2102_i2c_func,
+};
+
+static int dw2102_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+{
+       int i;
+       u8 ibuf[] = {0, 0};
+       u8 eeprom[256], eepromline[16];
+
+       for (i = 0; i < 256; i++) {
+               if (dw2102_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW2102_READ_MSG) < 0) {
+                       err("read eeprom failed.");
+                       return -1;
+               } else {
+                       eepromline[i%16] = ibuf[0];
+                       eeprom[i] = ibuf[0];
+               }
+               if ((i % 16) == 15) {
+                       deb_xfer("%02x: ", i - 15);
+                       debug_dump(eepromline, 16, deb_xfer);
+               }
+       }
+       memcpy(mac, eeprom + 8, 6);
+       return 0;
+};
+
 static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
        static u8 command_13v[1] = {0x00};
@@ -163,6 +282,22 @@ static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
        return 0;
 }
 
+static struct cx24116_config dw2104_config = {
+       .demod_address = 0x55,
+       /*.mpg_clk_pos_pol = 0x01,*/
+};
+
+static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
+{
+       if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
+                       &d->dev->i2c_adap)) != NULL) {
+               d->fe->ops.set_voltage = dw2102_set_voltage;
+               info("Attached cx24116!\n");
+               return 0;
+       }
+       return -EIO;
+}
+
 static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 {
        d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
@@ -249,6 +384,8 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 static struct usb_device_id dw2102_table[] = {
        {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
        {USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
+       {USB_DEVICE(USB_VID_CYPRESS, 0x2104)},
+       {USB_DEVICE(0x9022, 0xd650)},
        { }
 };
 
@@ -273,25 +410,23 @@ static int dw2102_load_firmware(struct usb_device *dev,
                        return ret;
                }
                break;
-       case USB_PID_DW2102:
+       default:
                fw = frmwr;
                break;
        }
-       info("start downloading DW2102 firmware");
+       info("start downloading DW210X firmware");
        p = kmalloc(fw->size, GFP_KERNEL);
        reset = 1;
        /*stop the CPU*/
-       dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG);
-       dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG);
+       dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW2102_WRITE_MSG);
+       dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW2102_WRITE_MSG);
 
        if (p != NULL) {
                memcpy(p, fw->data, fw->size);
                for (i = 0; i < fw->size; i += 0x40) {
                        b = (u8 *) p + i;
-                       if (dw2102_op_rw
-                               (dev, 0xa0, i, b , 0x40,
-                                       DW2102_WRITE_MSG) != 0x40
-                               ) {
+                       if (dw2102_op_rw(dev, 0xa0, i, 0, b , 0x40,
+                                       DW2102_WRITE_MSG) != 0x40) {
                                err("error while transferring firmware");
                                ret = -EINVAL;
                                break;
@@ -299,43 +434,45 @@ static int dw2102_load_firmware(struct usb_device *dev,
                }
                /* restart the CPU */
                reset = 0;
-               if (ret || dw2102_op_rw
-                       (dev, 0xa0, 0x7f92, &reset, 1,
-                       DW2102_WRITE_MSG) != 1) {
+               if (ret || dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1,
+                                       DW2102_WRITE_MSG) != 1) {
                        err("could not restart the USB controller CPU.");
                        ret = -EINVAL;
                }
-               if (ret || dw2102_op_rw
-                       (dev, 0xa0, 0xe600, &reset, 1,
-                       DW2102_WRITE_MSG) != 1) {
+               if (ret || dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1,
+                                       DW2102_WRITE_MSG) != 1) {
                        err("could not restart the USB controller CPU.");
                        ret = -EINVAL;
                }
                /* init registers */
                switch (dev->descriptor.idProduct) {
+               case USB_PID_DW2104:
+               case 0xd650:
+                       reset = 1;
+                       dw2102_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
+                                       DW2102_WRITE_MSG);
+                       reset = 0;
+                       dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
+                                       DW2102_WRITE_MSG);
+                       break;
                case USB_PID_DW2102:
-                       dw2102_op_rw
-                               (dev, 0xbf, 0x0040, &reset, 0,
-                               DW2102_WRITE_MSG);
-                       dw2102_op_rw
-                               (dev, 0xb9, 0x0000, &reset16[0], 2,
-                               DW2102_READ_MSG);
+                       dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
+                                       DW2102_WRITE_MSG);
+                       dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
+                                       DW2102_READ_MSG);
                        break;
                case 0x2101:
-                       dw2102_op_rw
-                               (dev, 0xbc, 0x0030, &reset16[0], 2,
-                               DW2102_READ_MSG);
-                       dw2102_op_rw
-                               (dev, 0xba, 0x0000, &reset16[0], 7,
-                               DW2102_READ_MSG);
-                       dw2102_op_rw
-                               (dev, 0xba, 0x0000, &reset16[0], 7,
-                               DW2102_READ_MSG);
-                       dw2102_op_rw
-                               (dev, 0xb9, 0x0000, &reset16[0], 2,
-                               DW2102_READ_MSG);
+                       dw2102_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
+                                       DW2102_READ_MSG);
+                       dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
+                                       DW2102_READ_MSG);
+                       dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
+                                       DW2102_READ_MSG);
+                       dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
+                                       DW2102_READ_MSG);
                        break;
                }
+               msleep(100);
                kfree(p);
        }
        return ret;
@@ -358,7 +495,8 @@ static struct dvb_usb_device_properties dw2102_properties = {
        /* parameter for the MPEG2-data transfer */
        .num_adapters = 1,
        .download_firmware = dw2102_load_firmware,
-       .adapter = {
+       .read_mac_address = dw2102_read_mac_address,
+               .adapter = {
                {
                        .frontend_attach = dw2102_frontend_attach,
                        .streaming_ctrl = NULL,
@@ -388,11 +526,64 @@ static struct dvb_usb_device_properties dw2102_properties = {
        }
 };
 
+static struct dvb_usb_device_properties dw2104_properties = {
+       .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+       .usb_ctrl = DEVICE_SPECIFIC,
+       .firmware = "dvb-usb-dw2104.fw",
+       .size_of_priv = sizeof(struct dw2102_state),
+       .no_reconnect = 1,
+
+       .i2c_algo = &dw2104_i2c_algo,
+       .rc_key_map = dw2102_rc_keys,
+       .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
+       .rc_interval = 150,
+       .rc_query = dw2102_rc_query,
+
+       .generic_bulk_ctrl_endpoint = 0x81,
+       /* parameter for the MPEG2-data transfer */
+       .num_adapters = 1,
+       .download_firmware = dw2102_load_firmware,
+       .read_mac_address = dw2102_read_mac_address,
+       .adapter = {
+               {
+                       .frontend_attach = dw2104_frontend_attach,
+                       .streaming_ctrl = NULL,
+                       /*.tuner_attach = dw2104_tuner_attach,*/
+                       .stream = {
+                               .type = USB_BULK,
+                               .count = 8,
+                               .endpoint = 0x82,
+                               .u = {
+                                       .bulk = {
+                                               .buffersize = 4096,
+                                       }
+                               }
+                       },
+               }
+       },
+       .num_device_descs = 2,
+       .devices = {
+               { "DVBWorld DW2104 USB2.0",
+                       {&dw2102_table[2], NULL},
+                       {NULL},
+               },
+               { "TeVii S650 USB2.0",
+                       {&dw2102_table[3], NULL},
+                       {NULL},
+               },
+       }
+};
+
 static int dw2102_probe(struct usb_interface *intf,
                const struct usb_device_id *id)
 {
-       return dvb_usb_device_init(intf, &dw2102_properties,
-               THIS_MODULE, NULL, adapter_nr);
+       if (0 == dvb_usb_device_init(intf, &dw2102_properties,
+                       THIS_MODULE, NULL, adapter_nr) ||
+           0 == dvb_usb_device_init(intf, &dw2104_properties,
+                       THIS_MODULE, NULL, adapter_nr)) {
+               return 0;
+       }
+       return -ENODEV;
 }
 
 static struct usb_driver dw2102_driver = {
@@ -420,6 +611,6 @@ module_init(dw2102_module_init);
 module_exit(dw2102_module_exit);
 
 MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
-MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
index 7a310f906837c9fdbe24ef822a9fea9f2fc51e2d..e3370734e95a2d625e736a8718de9d671ab759e1 100644 (file)
@@ -4,6 +4,5 @@
 #define DVB_USB_LOG_PREFIX "dw2102"
 #include "dvb-usb.h"
 
-extern int dvb_usb_dw2102_debug;
 #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
 #endif