ath10k: AP: handle HT station which does not have HT RX MCS

This is a workaround for HT-enabled STAs which break the spec
and have no HT capabilities RX mask (no HT RX MCS map).

As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.

Firmware asserts if such situation occurs.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b2c65904449c31e52c0a8beefc5a8896630b46fd..1c305b10e47782b0f3bc7116802bb5bfd764ae6f 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1148,8 +1148,23 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
                if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
                        arg->peer_ht_rates.rates[n++] = i;
 
-       arg->peer_ht_rates.num_rates = n;
-       arg->peer_num_spatial_streams = sta->rx_nss;
+       /*
+        * This is a workaround for HT-enabled STAs which break the spec
+        * and have no HT capabilities RX mask (no HT RX MCS map).
+        *
+        * As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
+        * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
+        *
+        * Firmware asserts if such situation occurs.
+        */
+       if (n == 0) {
+               arg->peer_ht_rates.num_rates = 8;
+               for (i = 0; i < arg->peer_ht_rates.num_rates; i++)
+                       arg->peer_ht_rates.rates[i] = i;
+       } else {
+               arg->peer_ht_rates.num_rates = n;
+               arg->peer_num_spatial_streams = sta->rx_nss;
+       }
 
        ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
                   arg->addr,