ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.

Now that both usb2 and usb3 phy drivers, and also the ST dwc3 glue code
are all present upstream, we can add the dwc3 DT node and have a working
usb3 controller on stih407-b2120 and stih410-b2020.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 363db4b544c90c124297a5584fad0fb005e42998..bec7e82a0844fa22e876d208617f645bdab0d05f 100644 (file)
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -516,5 +516,32 @@
 
                        status = "disabled";
                };
+
+               st_dwc3: dwc3@8f94000 {
+                       compatible      = "st,stih407-dwc3";
+                       reg             = <0x08f94000 0x1000>, <0x110 0x4>;
+                       reg-names       = "reg-glue", "syscfg-reg";
+                       st,syscfg       = <&syscfg_core>;
+                       resets          = <&powerdown STIH407_USB3_POWERDOWN>,
+                                         <&softreset STIH407_MIPHY2_SOFTRESET>;
+                       reset-names     = "powerdown", "softreset";
+                       #address-cells  = <1>;
+                       #size-cells     = <1>;
+                       pinctrl-names   = "default";
+                       pinctrl-0       = <&pinctrl_usb3>;
+                       ranges;
+
+                       status = "disabled";
+
+                       dwc3: dwc3@9900000 {
+                               compatible      = "snps,dwc3";
+                               reg             = <0x09900000 0x100000>;
+                               interrupts      = <GIC_SPI 155 IRQ_TYPE_NONE>;
+                               dr_mode         = "host";
+                               phy-names       = "usb2-phy", "usb3-phy";
+                               phys            = <&usb2_picophy0>,
+                                                 <&phy_port2 PHY_TYPE_USB3>;
+                       };
+               };
        };
 };