[SERIAL] Remove incorrect code from ioc4 serial driver
authorRussell King <rmk@dyn-67.arm.linux.org.uk>
Fri, 10 Feb 2006 21:50:43 +0000 (21:50 +0000)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Fri, 10 Feb 2006 21:50:43 +0000 (21:50 +0000)
Serial drivers in general should not write uart_info->flags - they're
private to serial_core.  Serial drivers have no need to fiddle with
tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags.  Fix the
ioc4 serial driver for both these points by simply removing the
offending code.

Acked-by: pfg@sgi.com
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/serial/ioc4_serial.c

index 1d85533d46d2170caecdb44779fd06e4885e90a0..f3763d2ccb866e31de2d3ff06ddda631f20eac7c 100644 (file)
@@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_port,
        }
 
        if (cflag & CRTSCTS) {
-               info->flags |= ASYNC_CTS_FLOW;
                port->ip_sscr |= IOC4_SSCR_HFC_EN;
        }
        else {
-               info->flags &= ~ASYNC_CTS_FLOW;
                port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
        }
        writel(port->ip_sscr, &port->ip_serial_regs->sscr);
@@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(struct uart_port *the_port)
 
        info = the_port->info;
 
-       if (info->tty) {
-               set_bit(TTY_IO_ERROR, &info->tty->flags);
-               clear_bit(TTY_IO_ERROR, &info->tty->flags);
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                       info->tty->alt_speed = 57600;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                       info->tty->alt_speed = 115200;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                       info->tty->alt_speed = 230400;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                       info->tty->alt_speed = 460800;
-       }
        local_open(port);
 
        /* set the speed of the serial port */