[TG3]: use TG3_FLG2_5705_PLUS instead of multi-way if's
authorJohn W. Linville <linville@tuxdriver.com>
Fri, 22 Apr 2005 00:00:02 +0000 (17:00 -0700)
committerDavid S. Miller <davem@sunset.davemloft.net>
Fri, 22 Apr 2005 00:00:02 +0000 (17:00 -0700)
Replace a number of three-way if statements checking for 5705, 5750,
and 5752 to reference the equivalent TG3_FLG2_5705_PLUS flag instead.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c

index 4375eec06d3711fdb32e84ab88833631bddb9bae..7ff598c9a0ca1db91b2494b8e8309aafbea01c4f 100644 (file)
@@ -85,9 +85,7 @@
 /* hardware minimum and maximum for a single frame's data payload */
 #define TG3_MIN_MTU                    60
 #define TG3_MAX_MTU(tp)        \
-       ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 && \
-         GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 && \
-         GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) ? 9000 : 1500)
+       (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 9000 : 1500)
 
 /* These numbers seem to be hard coded in the NIC firmware somehow.
  * You can't change the ring sizes, but you can change where you place
@@ -863,9 +861,7 @@ out:
        if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
                /* Cannot do read-modify-write on 5401 */
                tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
-       } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 &&
-                  GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 &&
-                  GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) {
+       } else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
                u32 phy_reg;
 
                /* Set bit 14 with read-modify-write to preserve other bits */
@@ -877,9 +873,7 @@ out:
        /* Set phy register 0x10 bit 0 to high fifo elasticity to support
         * jumbo frames transmission.
         */
-       if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 &&
-           GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 &&
-           GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) {
+       if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
                u32 phy_reg;
 
                if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
@@ -8483,9 +8477,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
                /* DMA read watermark not used on PCIE */
                tp->dma_rwctrl |= 0x00180000;
        } else if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
-               if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ||
-                   GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
-                   GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+               if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
                        tp->dma_rwctrl |= 0x003f0000;
                else
                        tp->dma_rwctrl |= 0x003f000f;