ARM: pxa: lubbock: use new pxa_cplds driver

As the interrupt handling was transferred to the pxa_cplds driver,
make the switch in lubbock platform code.

Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 958cd6af93842566308a33d11f1799dd78f332d9..1eecf794acd2e4ab0605f5904a6df23575322aad 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -37,7 +37,9 @@
 #define LUB_GP                 __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
 /* Board specific IRQs */
-#define LUBBOCK_IRQ(x)         (IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS                IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x)         (LUBBOCK_NR_IRQS + (x))
 #define LUBBOCK_SD_IRQ         LUBBOCK_IRQ(0)
 #define LUBBOCK_SA1111_IRQ     LUBBOCK_IRQ(1)
 #define LUBBOCK_USB_IRQ                LUBBOCK_IRQ(2)  /* usb connect */
@@ -47,8 +49,7 @@
 #define LUBBOCK_USB_DISC_IRQ   LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ       LUBBOCK_IRQ(6)
 
-#define LUBBOCK_SA1111_IRQ_BASE        (IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS                (IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE        (LUBBOCK_NR_IRQS + 32)
 
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d8a1be619f21c7578bbde5fa37d00907fa80e353..4ac9ab80d24bdf147c23a4f31ab85d76cb4a82c5 100644 (file)
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -12,6 +12,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 }
 EXPORT_SYMBOL(lubbock_set_misc_wr);
 
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-       int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-       LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-       int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-       /* the irq can be acknowledged only if deasserted, so it's done here */
-       LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-       LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-       .name           = "FPGA",
-       .irq_ack        = lubbock_mask_irq,
-       .irq_mask       = lubbock_mask_irq,
-       .irq_unmask     = lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-       unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-       do {
-               /* clear our parent irq */
-               desc->irq_data.chip->irq_ack(&desc->irq_data);
-               if (likely(pending)) {
-                       irq = LUBBOCK_IRQ(0) + __ffs(pending);
-                       generic_handle_irq(irq);
-               }
-               pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-       } while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-       int irq;
-
-       pxa25x_init_irq();
-
-       /* setup extra lubbock irqs */
-       for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-               irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-                                        handle_level_irq);
-               set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-       }
-
-       irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-       irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-       LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-       .resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-       if (machine_is_lubbock()) {
-               register_syscore_ops(&lubbock_irq_syscore_ops);
-               return 0;
-       }
-       return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
 static int lubbock_udc_is_connected(void)
 {
        return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
        },
 };
 
+static struct resource lubbock_cplds_resources[] = {
+       [0] = {
+               .start  = LUBBOCK_FPGA_PHYS + 0xc0,
+               .end    = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = PXA_GPIO_TO_IRQ(0),
+               .end    = PXA_GPIO_TO_IRQ(0),
+               .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+       },
+       [2] = {
+               .start  = LUBBOCK_IRQ(0),
+               .end    = LUBBOCK_IRQ(6),
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device lubbock_cplds_device = {
+       .name           = "pxa_cplds_irqs",
+       .id             = -1,
+       .resource       = &lubbock_cplds_resources[0],
+       .num_resources  = 3,
+};
+
+
 static struct platform_device *devices[] __initdata = {
        &sa1111_device,
        &smc91x_device,
        &lubbock_flash_device[0],
        &lubbock_flash_device[1],
+       &lubbock_cplds_device,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
        /* Maintainer: MontaVista Software Inc. */
        .map_io         = lubbock_map_io,
        .nr_irqs        = LUBBOCK_NR_IRQS,
-       .init_irq       = lubbock_init_irq,
+       .init_irq       = pxa25x_init_irq,
        .handle_irq     = pxa25x_handle_irq,
        .init_time      = pxa_timer_init,
        .init_machine   = lubbock_init,