ARM: dts: dra7: Add USB related nodes

Add nodes for the Super Speed USB controllers, omap-control-usb,
USB2 PHY and USB3 PHY devices.

Remove ocp2scp1 address space from hwmod data as it is
now provided via device tree.

CC: Benoît Cousson <bcousson@baylibre.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ffbcd4d7dce1ff2dc5d8098bae1c72fc7a27592c..6af8b080ea6d0274ee22a3a29d6fc8b64cddc90d 100644 (file)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -815,6 +815,155 @@
                        clocks = <&sata_ref_clk>;
                        ti,hwmods = "sata";
                };
+
+               omap_control_usb2phy1: control-phy@4a002300 {
+                       compatible = "ti,control-phy-usb2";
+                       reg = <0x4a002300 0x4>;
+                       reg-names = "power";
+               };
+
+               omap_control_usb3phy1: control-phy@4a002370 {
+                       compatible = "ti,control-phy-pipe3";
+                       reg = <0x4a002370 0x4>;
+                       reg-names = "power";
+               };
+
+               omap_control_usb2phy2: control-phy@0x4a002e74 {
+                       compatible = "ti,control-phy-usb2-dra7";
+                       reg = <0x4a002e74 0x4>;
+                       reg-names = "power";
+               };
+
+               /* OCP2SCP1 */
+               ocp2scp@4a080000 {
+                       compatible = "ti,omap-ocp2scp";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       reg = <0x4a080000 0x20>;
+                       ti,hwmods = "ocp2scp1";
+
+                       usb2_phy1: phy@4a084000 {
+                               compatible = "ti,omap-usb2";
+                               reg = <0x4a084000 0x400>;
+                               ctrl-module = <&omap_control_usb2phy1>;
+                               clocks = <&usb_phy1_always_on_clk32k>,
+                                        <&usb_otg_ss1_refclk960m>;
+                               clock-names =   "wkupclk",
+                                               "refclk";
+                               #phy-cells = <0>;
+                       };
+
+                       usb2_phy2: phy@4a085000 {
+                               compatible = "ti,omap-usb2";
+                               reg = <0x4a085000 0x400>;
+                               ctrl-module = <&omap_control_usb2phy2>;
+                               clocks = <&usb_phy2_always_on_clk32k>,
+                                        <&usb_otg_ss2_refclk960m>;
+                               clock-names =   "wkupclk",
+                                               "refclk";
+                               #phy-cells = <0>;
+                       };
+
+                       usb3_phy1: phy@4a084400 {
+                               compatible = "ti,omap-usb3";
+                               reg = <0x4a084400 0x80>,
+                                     <0x4a084800 0x64>,
+                                     <0x4a084c00 0x40>;
+                               reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+                               ctrl-module = <&omap_control_usb3phy1>;
+                               clocks = <&usb_phy3_always_on_clk32k>,
+                                        <&sys_clkin1>,
+                                        <&usb_otg_ss1_refclk960m>;
+                               clock-names =   "wkupclk",
+                                               "sysclk",
+                                               "refclk";
+                               #phy-cells = <0>;
+                       };
+               };
+
+               omap_dwc3_1@48880000 {
+                       compatible = "ti,dwc3";
+                       ti,hwmods = "usb_otg_ss1";
+                       reg = <0x48880000 0x10000>;
+                       interrupts = <0 77 4>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       utmi-mode = <2>;
+                       ranges;
+                       usb1: usb@48890000 {
+                               compatible = "snps,dwc3";
+                               reg = <0x48890000 0x17000>;
+                               interrupts = <0 76 4>;
+                               phys = <&usb2_phy1>, <&usb3_phy1>;
+                               phy-names = "usb2-phy", "usb3-phy";
+                               tx-fifo-resize;
+                               maximum-speed = "super-speed";
+                               dr_mode = "otg";
+                       };
+               };
+
+               omap_dwc3_2@488c0000 {
+                       compatible = "ti,dwc3";
+                       ti,hwmods = "usb_otg_ss2";
+                       reg = <0x488c0000 0x10000>;
+                       interrupts = <0 92 4>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       utmi-mode = <2>;
+                       ranges;
+                       usb2: usb@488d0000 {
+                               compatible = "snps,dwc3";
+                               reg = <0x488d0000 0x17000>;
+                               interrupts = <0 78 4>;
+                               phys = <&usb2_phy2>;
+                               phy-names = "usb2-phy";
+                               tx-fifo-resize;
+                               maximum-speed = "high-speed";
+                               dr_mode = "otg";
+                       };
+               };
+
+               /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+               omap_dwc3_3@48900000 {
+                       compatible = "ti,dwc3";
+                       ti,hwmods = "usb_otg_ss3";
+                       reg = <0x48900000 0x10000>;
+               /*      interrupts = <0 TBD 4>; */
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       utmi-mode = <2>;
+                       ranges;
+                       status = "disabled";
+                       usb3: usb@48910000 {
+                               compatible = "snps,dwc3";
+                               reg = <0x48910000 0x17000>;
+               /*              interrupts = <0 93 4>; */
+                               tx-fifo-resize;
+                               maximum-speed = "high-speed";
+                               dr_mode = "otg";
+                       };
+               };
+
+               omap_dwc3_4@48940000 {
+                       compatible = "ti,dwc3";
+                       ti,hwmods = "usb_otg_ss4";
+                       reg = <0x48940000 0x10000>;
+               /*      interrupts = <0 TBD 4>; */
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       utmi-mode = <2>;
+                       ranges;
+                       status = "disabled";
+                       usb4: usb@48950000 {
+                               compatible = "snps,dwc3";
+                               reg = <0x48950000 0x17000>;
+               /*              interrupts = <0 TBD 4>; */
+                               tx-fifo-resize;
+                               maximum-speed = "high-speed";
+                               dr_mode = "otg";
+                       };
+               };
        };
 };
 

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 810c205d668bfa5040ed2ad0458b412eb83b538e..20b4398cec05ce63dea1a1cece300800c975060c 100644 (file)
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2318,21 +2318,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = {
-       {
-               .pa_start       = 0x4a080000,
-               .pa_end         = 0x4a08001f,
-               .flags          = ADDR_TYPE_RT
-       },
-       { }
-};
-
 /* l4_cfg -> ocp2scp1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
        .master         = &dra7xx_l4_cfg_hwmod,
        .slave          = &dra7xx_ocp2scp1_hwmod,
        .clk            = "l4_root_clk_div",
-       .addr           = dra7xx_ocp2scp1_addrs,
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };