powerpc/mpc85xx:Add initial device tree support of T104x
authorPrabhakar Kushwaha <prabhakar@freescale.com>
Mon, 21 Apr 2014 11:34:28 +0000 (17:04 +0530)
committerScott Wood <scottwood@freescale.com>
Thu, 22 May 2014 23:08:29 +0000 (18:08 -0500)
The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
processor cores with high-performance data path acceleration architecture
and network peripheral interfaces required for networking & telecommunications.

T1042 personality is a reduced personality of T1040 without Integrated 8-port
Gigabit Ethernet switch.

The T1040/T1042 SoC includes the following function and features:

 - Four e5500 cores, each with a private 256 KB L2 cache
 - 256 KB shared L3 CoreNet platform cache (CPC)
 - Interconnect CoreNet platform
 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
   support
 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
 for the following functions:
    -  Packet parsing, classification, and distribution
    -  Queue management for scheduling, packet sequencing, and congestion
     management
    -  Cryptography Acceleration (SEC 5.0)
    - RegEx Pattern Matching Acceleration (PME 2.2)
    - IEEE Std 1588 support
    - Hardware buffer management for buffer allocation and deallocation
 - Ethernet interfaces
    - Integrated 8-port Gigabit Ethernet switch (T1040 only)
    - Four 1 Gbps Ethernet controllers
 - Two RGMII interfaces or one RGMII and one MII interfaces
 - High speed peripheral interfaces
   - Four PCI Express 2.0 controllers running at up to 5 GHz
   - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
   - Upto two QSGMII interface
   - Upto six SGMII interface supporting 1000 Mbps
   - One SGMII interface supporting upto 2500 Mbps
 - Additional peripheral interfaces
   - Two USB 2.0 controllers with integrated PHY
   - SD/eSDHC/eMMC
   -  eSPI controller
   - Four I2C controllers
   - Four UARTs
   - Four GPIO controllers
   - Integrated flash controller (IFC)
   - Change this to  LCD/ HDMI interface (DIU) with 12 bit dual data rate
   - TDM interface
 - Multicore programmable interrupt controller (PIC)
 - Two 8-channel DMA engines
 - Single source clocking implementation
 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/t1042si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi [new file with mode: 0644]

diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
new file mode 100644 (file)
index 0000000..12e597e
--- /dev/null
@@ -0,0 +1,430 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       compatible = "fsl,ifc", "simple-bus";
+       interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+       compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <20 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <20 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 40 1 0 0
+                       0000 0 0 2 &mpic 1 1 0 0
+                       0000 0 0 3 &mpic 2 1 0 0
+                       0000 0 0 4 &mpic 3 1 0 0
+                       >;
+       };
+};
+
+&pci1 {
+       compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0 0xff>;
+       interrupts = <21 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <21 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 41 1 0 0
+                       0000 0 0 2 &mpic 5 1 0 0
+                       0000 0 0 3 &mpic 6 1 0 0
+                       0000 0 0 4 &mpic 7 1 0 0
+                       >;
+       };
+};
+
+&pci2 {
+       compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <22 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <22 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 42 1 0 0
+                       0000 0 0 2 &mpic 9 1 0 0
+                       0000 0 0 3 &mpic 10 1 0 0
+                       0000 0 0 4 &mpic 11 1 0 0
+                       >;
+       };
+};
+
+&pci3 {
+       compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <23 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <23 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 43 1 0 0
+                       0000 0 0 2 &mpic 0 1 0 0
+                       0000 0 0 3 &mpic 4 1 0 0
+                       0000 0 0 4 &mpic 8 1 0 0
+                       >;
+       };
+};
+
+&dcsr {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "fsl,dcsr", "simple-bus";
+
+       dcsr-epu@0 {
+               compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+               interrupts = <52 2 0 0
+                             84 2 0 0
+                             85 2 0 0>;
+               reg = <0x0 0x1000>;
+       };
+       dcsr-npc {
+               compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+               reg = <0x1000 0x1000 0x1002000 0x10000>;
+       };
+       dcsr-nxc@2000 {
+               compatible = "fsl,dcsr-nxc";
+               reg = <0x2000 0x1000>;
+       };
+       dcsr-corenet {
+               compatible = "fsl,dcsr-corenet";
+               reg = <0x8000 0x1000 0x1A000 0x1000>;
+       };
+       dcsr-dpaa@9000 {
+               compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+               reg = <0x9000 0x1000>;
+       };
+       dcsr-ocn@11000 {
+               compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+               reg = <0x11000 0x1000>;
+       };
+       dcsr-ddr@12000 {
+               compatible = "fsl,dcsr-ddr";
+               dev-handle = <&ddr1>;
+               reg = <0x12000 0x1000>;
+       };
+       dcsr-nal@18000 {
+               compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+               reg = <0x18000 0x1000>;
+       };
+       dcsr-rcpm@22000 {
+               compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+               reg = <0x22000 0x1000>;
+       };
+       dcsr-snpc@30000 {
+               compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x30000 0x1000 0x1022000 0x10000>;
+       };
+       dcsr-snpc@31000 {
+               compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x31000 0x1000 0x1042000 0x10000>;
+       };
+       dcsr-cpu-sb-proxy@100000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu0>;
+               reg = <0x100000 0x1000 0x101000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@108000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu1>;
+               reg = <0x108000 0x1000 0x109000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@110000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu2>;
+               reg = <0x110000 0x1000 0x111000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@118000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu3>;
+               reg = <0x118000 0x1000 0x119000 0x1000>;
+       };
+};
+
+&soc {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       device_type = "soc";
+       compatible = "simple-bus";
+
+       soc-sram-error {
+               compatible = "fsl,soc-sram-error";
+               interrupts = <16 2 1 29>;
+       };
+
+       corenet-law@0 {
+               compatible = "fsl,corenet-law";
+               reg = <0x0 0x1000>;
+               fsl,num-laws = <16>;
+       };
+
+       ddr1: memory-controller@8000 {
+               compatible = "fsl,qoriq-memory-controller-v5.0",
+                               "fsl,qoriq-memory-controller";
+               reg = <0x8000 0x1000>;
+               interrupts = <16 2 1 23>;
+       };
+
+       cpc: l3-cache-controller@10000 {
+               compatible = "fsl,t1040-l3-cache-controller", "cache";
+               reg = <0x10000 0x1000>;
+               interrupts = <16 2 1 27>;
+       };
+
+       corenet-cf@18000 {
+               compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+               reg = <0x18000 0x1000>;
+               interrupts = <16 2 1 31>;
+               fsl,ccf-num-csdids = <32>;
+               fsl,ccf-num-snoopids = <32>;
+       };
+
+       iommu@20000 {
+               compatible = "fsl,pamu-v1.0", "fsl,pamu";
+               reg = <0x20000 0x1000>;
+               ranges = <0 0x20000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               interrupts = <
+                       24 2 0 0
+                       16 2 1 30>;
+               pamu0: pamu@0 {
+                       reg = <0 0x1000>;
+                       fsl,primary-cache-geometry = <128 1>;
+                       fsl,secondary-cache-geometry = <16 2>;
+               };
+       };
+
+/include/ "qoriq-mpic.dtsi"
+
+       guts: global-utilities@e0000 {
+               compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+               reg = <0xe0000 0xe00>;
+               fsl,has-rstcr;
+               fsl,liodn-bits = <12>;
+       };
+
+       clockgen: global-utilities@e1000 {
+               compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+               ranges = <0x0 0xe1000 0x1000>;
+               reg = <0xe1000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysclk: sysclk {
+                       #clock-cells = <0>;
+                       compatible = "fsl,qoriq-sysclk-2.0";
+                       clock-output-names = "sysclk", "fixed-clock";
+               };
+
+
+               pll0: pll0@800 {
+                       #clock-cells = <1>;
+                       reg = <0x800 4>;
+                       compatible = "fsl,qoriq-core-pll-2.0";
+                       clocks = <&sysclk>;
+                       clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+               };
+
+               pll1: pll1@820 {
+                       #clock-cells = <1>;
+                       reg = <0x820 4>;
+                       compatible = "fsl,qoriq-core-pll-2.0";
+                       clocks = <&sysclk>;
+                       clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+               };
+
+               mux0: mux0@0 {
+                       #clock-cells = <0>;
+                       reg = <0x0 4>;
+                       compatible = "fsl,qoriq-core-mux-2.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+                                <&pll1 0>, <&pll1 1>, <&pll1 2>;
+                       clock-names = "pll0", "pll0-div2", "pll1-div4",
+                               "pll1", "pll1-div2", "pll1-div4";
+                       clock-output-names = "cmux0";
+               };
+
+               mux1: mux1@20 {
+                       #clock-cells = <0>;
+                       reg = <0x20 4>;
+                       compatible = "fsl,qoriq-core-mux-2.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+                                <&pll1 0>, <&pll1 1>, <&pll1 2>;
+                       clock-names = "pll0", "pll0-div2", "pll1-div4",
+                               "pll1", "pll1-div2", "pll1-div4";
+                       clock-output-names = "cmux1";
+               };
+
+               mux2: mux2@40 {
+                       #clock-cells = <0>;
+                       reg = <0x40 4>;
+                       compatible = "fsl,qoriq-core-mux-2.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+                                <&pll1 0>, <&pll1 1>, <&pll1 2>;
+                       clock-names = "pll0", "pll0-div2", "pll1-div4",
+                               "pll1", "pll1-div2", "pll1-div4";
+                       clock-output-names = "cmux2";
+               };
+
+               mux3: mux3@60 {
+                       #clock-cells = <0>;
+                       reg = <0x60 4>;
+                       compatible = "fsl,qoriq-core-mux-2.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+                                <&pll1 0>, <&pll1 1>, <&pll1 2>;
+                       clock-names = "pll0_0", "pll0_1", "pll0_2",
+                               "pll1_0", "pll1_1", "pll1_2";
+                       clock-output-names = "cmux3";
+               };
+       };
+
+       rcpm: global-utilities@e2000 {
+               compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
+               reg = <0xe2000 0x1000>;
+       };
+
+       sfp: sfp@e8000 {
+               compatible = "fsl,t1040-sfp";
+               reg        = <0xe8000 0x1000>;
+       };
+
+       serdes: serdes@ea000 {
+               compatible = "fsl,t1040-serdes";
+               reg        = <0xea000 0x4000>;
+       };
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+       spi@110000 {
+               fsl,espi-num-chipselects = <4>;
+       };
+
+/include/ "qoriq-esdhc-0.dtsi"
+       sdhc@114000 {
+               compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+               sdhci,auto-cmd12;
+       };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+               usb0: usb@210000 {
+                       compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+                       fsl,iommu-parent = <&pamu0>;
+                       fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+                       phy_type = "utmi";
+                       port0;
+               };
+/include/ "qoriq-usb2-dr-0.dtsi"
+               usb1: usb@211000 {
+                       compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+                       fsl,iommu-parent = <&pamu0>;
+                       fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+                       dr_mode = "host";
+                       phy_type = "utmi";
+               };
+
+       display@180000 {
+               compatible = "fsl,t1040-diu", "fsl,diu";
+               reg = <0x180000 1000>;
+               interrupts = <74 2 0 0>;
+       };
+
+/include/ "qoriq-sata2-0.dtsi"
+       sata@220000 {
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+       };
+/include/ "qoriq-sata2-1.dtsi"
+       sata@221000 {
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+       };
+/include/ "qoriq-sec5.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
new file mode 100644 (file)
index 0000000..319b74f
--- /dev/null
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
new file mode 100644 (file)
index 0000000..bbb7025
--- /dev/null
@@ -0,0 +1,104 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       aliases {
+               ccsr = &soc;
+               dcsr = &dcsr;
+
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
+               serial3 = &serial3;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+               pci3 = &pci3;
+               usb0 = &usb0;
+               usb1 = &usb1;
+               sdhc = &sdhc;
+
+               crypto = &crypto;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: PowerPC,e5500@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       clocks = <&mux0>;
+                       next-level-cache = <&L2_1>;
+                       L2_1: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu1: PowerPC,e5500@1 {
+                       device_type = "cpu";
+                       reg = <1>;
+                       clocks = <&mux1>;
+                       next-level-cache = <&L2_2>;
+                       L2_2: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu2: PowerPC,e5500@2 {
+                       device_type = "cpu";
+                       reg = <2>;
+                       clocks = <&mux2>;
+                       next-level-cache = <&L2_3>;
+                       L2_3: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu3: PowerPC,e5500@3 {
+                       device_type = "cpu";
+                       reg = <3>;
+                       clocks = <&mux3>;
+                       next-level-cache = <&L2_4>;
+                       L2_4: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+       };
+};