ARM: dts: sbc-t3x: use omap specific pinctrl defines

Use omap specific pinctrl defines (OMAP3_CORE1_IOPAD) to configure
the padconf register offset.

This simplify further support of CompuLab's boards based on omap36xx,
omap34xx and am35x.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 486f4d6c4219176b91ce40285f9c123ed17834d1..508cd9b413fb1520a99a7251e63085efcc1234ca 100644 (file)
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -34,44 +34,44 @@
 &omap3_pmx_core {
        mmc1_pins: pinmux_mmc1_pins {
                pinctrl-single,pins = <
-                       0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
-                       0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd.sdmmc1_cmd */
-                       0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0.sdmmc1_dat0 */
-                       0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1.sdmmc1_dat1 */
-                       0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2.sdmmc1_dat2 */
-                       0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3.sdmmc1_dat3 */
+                       OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)/* sdmmc1_clk.sdmmc1_clk */
+                       OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+                       OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+                       OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+                       OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+                       OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
                >;
        };
 
        mmc2_pins: pinmux_mmc2_pins {
                pinctrl-single,pins = <
-                       0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
-                       0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
-                       0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0.sdmmc2_dat0 */
-                       0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1.sdmmc2_dat1 */
-                       0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2.sdmmc2_dat2 */
-                       0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3.sdmmc2_dat3 */
+                       OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+                       OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+                       OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+                       OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+                       OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+                       OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
                >;
        };
 
        smsc1_pins: pinmux_smsc1_pins {
                pinctrl-single,pins = <
-                       0x88 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_ncs5.gpmc_ncs5 */
-                       0x16a (PIN_INPUT_PULLUP | MUX_MODE4)    /* uart3_cts_rctx.gpio_163 */
+                       OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs5.gpmc_ncs5 */
+                       OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
                >;
        };
 
        uart3_pins: pinmux_uart3_pins {
                pinctrl-single,pins = <
-                       0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx_irrx.uart3_rx_irrx */
-                       0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx_irtx.uart3_tx_irtx */
+                       OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)        /* uart3_rx_irrx.uart3_rx_irrx */
+                       OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)       /* uart3_tx_irtx.uart3_tx_irtx */
                >;
        };
 
        wl12xx_gpio: pinmux_wl12xx_gpio {
                pinctrl-single,pins = <
-                       0xb2 (PIN_OUTPUT | MUX_MODE4)           /* dss_data3.gpio_73 */
-                       0x134 (PIN_INPUT | MUX_MODE4)           /* sdmmc2_dat4.gpio_136 */
+                       OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)       /* dss_data3.gpio_73 */
+                       OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)        /* sdmmc2_dat4.gpio_136 */
                >;
        };
 };

diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index c119bd545053a51ee1d954a98e5f62ca5a825990..0a8849fb39a8a775d100430c11bf6561c7a0e949 100644 (file)
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -23,8 +23,8 @@
 &omap3_pmx_core {
        smsc2_pins: pinmux_smsc2_pins {
                pinctrl-single,pins = <
-                       0x86 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_ncs4.gpmc_ncs4 */
-                       0xa2 (PIN_INPUT_PULLUP | MUX_MODE4)     /* gpmc_wait3.gpio_65 */
+                       OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs4.gpmc_ncs4 */
+                       OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
                >;
        };
-};
\ No newline at end of file
+};