ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 158111244122a3503cdab45348aea0fde84e1d2f..171bcbe1ec4b3ed995f7895a5b6a51868460b48c 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -23,36 +23,13 @@
        apb@80000000 {
                apbh@80000000 {
                        pinctrl@80018000 {
-                               pinctrl-names = "default", "default";
-                               pinctrl-1 = <&hog_pins_cfa10055
-                                       &hog_pins_cfa10055_pullup>;
-
-                               hog_pins_cfa10055: hog-10055@0 {
-                                       reg = <0>;
-                                       fsl,pinmux-ids = <
-                                               0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
-                                       >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
-                               };
-
-                               hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
-                                       reg = <0>;
-                                       fsl,pinmux-ids = <
-                                               0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-                                       >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
-                               };
-
                                spi2_pins_cfa10055: spi2-cfa10055@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
                                                0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
                                                0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+                                               0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
                                        >;
                                        fsl,drive-strength = <1>;
                                        fsl,voltage = <1>;
@@ -98,12 +75,23 @@
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <0>;
                                };
+
+                               lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <1>;
+                               };
                        };
 
                        lcdif@80030000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-                                            &lcdif_pins_cfa10055>;
+                                            &lcdif_pins_cfa10055
+                                            &lcdif_pins_cfa10055_pullup>;
                                display = <&display>;
                                status = "okay";