ARM: dts: sun9i: Enable USB support on A80 Optimus board

On the Optimus board, all three USB hosts can be used.
HCI0 and HCI2 are available through the USB connector.
HCI1 is available with HSIC through 2 pins on the GPIO
expansion header.

This patch also adds a regulator for HCI2/USB3's VBUS.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index a3fed2bdf620328424916c694b6b478de20d9b4f..e53f2656c2d0ff355d7fdac810bbcb2704a9f269 100644 (file)
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -86,6 +86,29 @@
                        gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
                };
        };
+
+       reg_usb3_vbus: usb3-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb3_vbus_pin_optimus>;
+               regulator-name = "usb3-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ehci2 {
+       status = "okay";
 };
 
 &i2c3 {
@@ -99,6 +122,14 @@
        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+       status = "okay";
+};
+
+&ohci2 {
+       status = "okay";
+};
+
 &pio {
        led_pins_optimus: led-pins@0 {
                allwinner,pins = "PH0", "PH1";
@@ -113,6 +144,20 @@
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
+
+       usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+               allwinner,pins = "PH5";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 };
 
 &mmc0 {
@@ -134,6 +179,12 @@
        status = "okay";
 };
 
+&reg_usb1_vbus {
+       pinctrl-0 = <&usb1_vbus_pin_optimus>;
+       gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;
@@ -150,3 +201,17 @@
        /* Enable internal pull-up */
        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
+
+&usbphy1 {
+       vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
+};
+
+&usbphy2 {
+       status = "okay";
+};
+
+&usbphy3 {
+       vbus-supply = <&reg_usb3_vbus>;
+       status = "okay";
+};