/*
* Probe for F81216A LPC to 4 UART
*
- * Based on drivers/tty/serial/8250_pnp.c, by Russell King, et al
- *
- * Copyright (C) 2014 Ricardo Ribalda, Qtechnology A/S
+ * Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S
*
*
* This program is free software; you can redistribute it and/or modify
#define RXW4C_IRA BIT(3)
#define TXW4C_IRA BIT(2)
-#define DRIVER_NAME "8250_fintek"
-
struct fintek_8250 {
u16 base_port;
u8 index;
u8 key;
- long line;
};
static int fintek_8250_enter_key(u16 base_port, u8 key)
{
-
- if (!request_muxed_region(base_port, 2, DRIVER_NAME))
+ if (!request_muxed_region(base_port, 2, "8250_fintek"))
return -EBUSY;
outb(key, base_port + ADDR_PORT);
return 0;
}
-static int fintek_8250_base_port(u16 io_address, u8 *key, u8 *index)
+static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
continue;
fintek_8250_exit_key(addr[i]);
- *key = keys[j];
- *index = k;
- return addr[i];
+ pdata->key = keys[j];
+ pdata->base_port = addr[i];
+ pdata->index = k;
+
+ return 0;
}
+
fintek_8250_exit_key(addr[i]);
}
}
return -ENODEV;
}
-static int
-fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+int fintek_8250_probe(struct uart_8250_port *uart)
{
- struct uart_8250_port uart;
struct fintek_8250 *pdata;
- int base_port;
- u8 key;
- u8 index;
-
- if (!pnp_port_valid(dev, 0))
- return -ENODEV;
+ struct fintek_8250 probe_data;
- base_port = fintek_8250_base_port(pnp_port_start(dev, 0), &key, &index);
- if (base_port < 0)
+ if (find_base_port(&probe_data, uart->port.iobase))
return -ENODEV;
- memset(&uart, 0, sizeof(uart));
-
- pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- uart.port.private_data = pdata;
- if (!pnp_irq_valid(dev, 0))
- return -ENODEV;
- uart.port.irq = pnp_irq(dev, 0);
- uart.port.iobase = pnp_port_start(dev, 0);
- uart.port.iotype = UPIO_PORT;
- uart.port.rs485_config = fintek_8250_rs485_config;
-
- uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
- if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
- uart.port.flags |= UPF_SHARE_IRQ;
- uart.port.uartclk = 1843200;
- uart.port.dev = &dev->dev;
-
- pdata->key = key;
- pdata->base_port = base_port;
- pdata->index = index;
- pdata->line = serial8250_register_8250_port(&uart);
- if (pdata->line < 0)
- return -ENODEV;
+ memcpy(pdata, &probe_data, sizeof(probe_data));
+ uart->port.rs485_config = fintek_8250_rs485_config;
+ uart->port.private_data = pdata;
- pnp_set_drvdata(dev, pdata);
return 0;
}
-
-static void fintek_8250_remove(struct pnp_dev *dev)
-{
- struct fintek_8250 *pdata = pnp_get_drvdata(dev);
-
- if (pdata)
- serial8250_unregister_port(pdata->line);
-}
-
-#ifdef CONFIG_PM
-static int fintek_8250_suspend(struct pnp_dev *dev, pm_message_t state)
-{
- struct fintek_8250 *pdata = pnp_get_drvdata(dev);
-
- if (!pdata)
- return -ENODEV;
- serial8250_suspend_port(pdata->line);
- return 0;
-}
-
-static int fintek_8250_resume(struct pnp_dev *dev)
-{
- struct fintek_8250 *pdata = pnp_get_drvdata(dev);
-
- if (!pdata)
- return -ENODEV;
- serial8250_resume_port(pdata->line);
- return 0;
-}
-#else
-#define fintek_8250_suspend NULL
-#define fintek_8250_resume NULL
-#endif /* CONFIG_PM */
-
-static const struct pnp_device_id fintek_dev_table[] = {
- /* Qtechnology Panel PC / IO1000 */
- { "PNP0501"},
- {}
-};
-
-MODULE_DEVICE_TABLE(pnp, fintek_dev_table);
-
-static struct pnp_driver fintek_8250_driver = {
- .name = DRIVER_NAME,
- .probe = fintek_8250_probe,
- .remove = fintek_8250_remove,
- .suspend = fintek_8250_suspend,
- .resume = fintek_8250_resume,
- .id_table = fintek_dev_table,
-};
-
-module_pnp_driver(fintek_8250_driver);
-MODULE_DESCRIPTION("Fintek F812164 module");
-MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
-MODULE_LICENSE("GPL");
This builds standard PNP serial support. You may be able to
disable this feature if you only need legacy serial support.
+config SERIAL_8250_FINTEK
+ bool "Support for Fintek F81216A LPC to 4 UART RS485 API"
+ depends on SERIAL_8250
+ ---help---
+ Selecting this option will add support for the RS485 capabilities
+ of the Fintek F81216A LPC to 4 UART.
+
+ If this option is not selected the device will be configured as a
+ standard 16550A serial port.
+
+ If unsure, say N.
+
config SERIAL_8250_CONSOLE
bool "Console on 8250/16550 and compatible serial port"
depends on SERIAL_8250=y
not booting kernel because the serial console remains silent in case
they forgot to update the command line.
-config SERIAL_8250_FINTEK
- tristate "Support for Fintek F81216A LPC to 4 UART"
- depends on SERIAL_8250 && PNP
- help
- Selecting this option will add support for the Fintek F81216A
- LPC to 4 UART. This device has some RS485 functionality not available
- through the PNP driver. If unsure, say N.
-
config SERIAL_8250_LPC18XX
tristate "NXP LPC18xx/43xx serial port support"
depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff