* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-#ifdef CONFIG_PM
/**
* struct vic_device - VIC PM device
* @irq: The IRQ number for the base of the VIC.
* @int_enable: Save for VIC_INT_ENABLE.
* @soft_int: Save for VIC_INT_SOFT.
* @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
*/
struct vic_device {
void __iomem *base;
u32 int_enable;
u32 soft_int;
u32 protect;
+ struct irq_domain domain;
};
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
-#endif /* CONFIG_PM */
/**
* vic_init2 - common initialisation code
return 0;
}
late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
/**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
*/
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+ u32 resume_sources, struct device_node *node)
{
struct vic_device *v;
- if (vic_id >= ARRAY_SIZE(vic_devices))
+ if (vic_id >= ARRAY_SIZE(vic_devices)) {
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
+ return;
}
+
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+
+ v->domain.irq_base = irq;
+ v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+ v->domain.of_node = of_node_get(node);
+ v->domain.ops = &irq_domain_simple_ops;
+#endif /* CONFIG_OF */
+ irq_domain_add(&v->domain);
}
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
static void vic_ack_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
static void vic_mask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE);
}
static int vic_set_wake(struct irq_data *d, unsigned int on)
{
struct vic_device *v = vic_from_irq(d->irq);
- unsigned int off = d->irq & 31;
+ unsigned int off = d->hwirq;
u32 bit = 1 << off;
if (!v)
vic_set_irq_sources(base, irq_start, vic_sources);
}
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources,
+ struct device_node *node)
{
unsigned int i;
u32 cellid = 0;
vic_set_irq_sources(base, irq_start, vic_sources);
- vic_pm_register(base, irq_start, resume_sources);
+ vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *regs;
+ int irq_base;
+
+ if (WARN(parent, "non-root VICs are not supported"))
+ return -EINVAL;
+
+ regs = of_iomap(node, 0);
+ if (WARN_ON(!regs))
+ return -EIO;
+
+ irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+ if (WARN_ON(irq_base < 0))
+ goto out_unmap;
+
+ __vic_init(regs, irq_base, ~0, ~0, node);
+
+ return 0;
+
+ out_unmap:
+ iounmap(regs);
+
+ return -EIO;
}
+#endif /* CONFIG OF */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff