OFFSET(PT_EAX, pt_regs, eax);
OFFSET(PT_DS, pt_regs, xds);
OFFSET(PT_ES, pt_regs, xes);
+ OFFSET(PT_GS, pt_regs, xgs);
OFFSET(PT_ORIG_EAX, pt_regs, orig_eax);
OFFSET(PT_EIP, pt_regs, eip);
OFFSET(PT_CS, pt_regs, xcs);
#endif
}
+/* Make sure %gs is initialized properly in idle threads */
+struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
+{
+ memset(regs, 0, sizeof(struct pt_regs));
+ regs->xgs = __KERNEL_PDA;
+ return regs;
+}
+
__cpuinit int alloc_gdt(int cpu)
{
struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
._pda = &boot_pda,
};
+static inline void set_kernel_gs(void)
+{
+ /* Set %gs for this CPU's PDA. Memory clobber is to create a
+ barrier with respect to any PDA operations, so the compiler
+ doesn't move any before here. */
+ asm volatile ("mov %0, %%gs" : : "r" (__KERNEL_PDA) : "memory");
+}
+
/* Initialize the CPU's GDT and PDA. The boot CPU does this for
itself, but secondaries find this done for them. */
__cpuinit int init_gdt(int cpu, struct task_struct *idle)
the boot CPU, this will transition from the boot gdt+pda to
the real ones). */
load_gdt(cpu_gdt_descr);
+ set_kernel_gs();
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
#endif
- /* Clear %fs and %gs. */
- asm volatile ("movl %0, %%fs; movl %0, %%gs" : : "r" (0));
+ /* Clear %fs. */
+ asm volatile ("mov %0, %%fs" : : "r" (0));
/* Clear all 6 debug registers: */
set_debugreg(0, 0);
* 18(%esp) - %eax
* 1C(%esp) - %ds
* 20(%esp) - %es
- * 24(%esp) - orig_eax
- * 28(%esp) - %eip
- * 2C(%esp) - %cs
- * 30(%esp) - %eflags
- * 34(%esp) - %oldesp
- * 38(%esp) - %oldss
+ * 24(%esp) - %gs
+ * 28(%esp) - orig_eax
+ * 2C(%esp) - %eip
+ * 30(%esp) - %cs
+ * 34(%esp) - %eflags
+ * 38(%esp) - %oldesp
+ * 3C(%esp) - %oldss
*
* "current" is in register %ebx during any slow entries.
*/
#define SAVE_ALL \
cld; \
+ pushl %gs; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET gs, 0;*/\
pushl %es; \
CFI_ADJUST_CFA_OFFSET 4;\
/*CFI_REL_OFFSET es, 0;*/\
CFI_REL_OFFSET ebx, 0;\
movl $(__USER_DS), %edx; \
movl %edx, %ds; \
- movl %edx, %es;
+ movl %edx, %es; \
+ movl $(__KERNEL_PDA), %edx; \
+ movl %edx, %gs
#define RESTORE_INT_REGS \
popl %ebx; \
2: popl %es; \
CFI_ADJUST_CFA_OFFSET -4;\
/*CFI_RESTORE es;*/\
-.section .fixup,"ax"; \
-3: movl $0,(%esp); \
- jmp 1b; \
+3: popl %gs; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE gs;*/\
+.pushsection .fixup,"ax"; \
4: movl $0,(%esp); \
+ jmp 1b; \
+5: movl $0,(%esp); \
jmp 2b; \
-.previous; \
+6: movl $0,(%esp); \
+ jmp 3b; \
.section __ex_table,"a";\
.align 4; \
- .long 1b,3b; \
- .long 2b,4b; \
-.previous
+ .long 1b,4b; \
+ .long 2b,5b; \
+ .long 3b,6b; \
+.popsection
#define RING0_INT_FRAME \
CFI_STARTPROC simple;\
andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
cmpl $USER_RPL, %eax
jb resume_kernel # not returning to v8086 or userspace
+
ENTRY(resume_userspace)
DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
movl PT_OLDESP(%esp), %ecx
xorl %ebp,%ebp
TRACE_IRQS_ON
+1: mov PT_GS(%esp), %gs
ENABLE_INTERRUPTS_SYSEXIT
CFI_ENDPROC
-
+.pushsection .fixup,"ax"
+2: movl $0,PT_GS(%esp)
+ jmp 1b
+.section __ex_table,"a"
+ .align 4
+ .long 1b,2b
+.popsection
# system call handler stub
ENTRY(system_call)
TRACE_IRQS_IRET
restore_nocheck_notrace:
RESTORE_REGS
- addl $4, %esp
+ addl $4, %esp # skip orig_eax/error_code
CFI_ADJUST_CFA_OFFSET -4
1: INTERRUPT_RETURN
.section .fixup,"ax"
CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
+ /* the function address is in %gs's slot on the stack */
+ pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
pushl %ds
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ds, 0*/
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET ebx, 0
cld
- pushl %es
+ pushl %gs
CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET es, 0*/
+ /*CFI_REL_OFFSET gs, 0*/
+ movl $(__KERNEL_PDA), %ecx
+ movl %ecx, %gs
UNWIND_ESPFIX_STACK
popl %ecx
CFI_ADJUST_CFA_OFFSET -4
/*CFI_REGISTER es, ecx*/
- movl PT_ES(%esp), %edi # get the function address
+ movl PT_GS(%esp), %edi # get the function address
movl PT_ORIG_EAX(%esp), %edx # get the error code
- movl $-1, PT_ORIG_EAX(%esp)
- movl %ecx, PT_ES(%esp)
- /*CFI_REL_OFFSET es, ES*/
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ mov %ecx, PT_GS(%esp)
+ /*CFI_REL_OFFSET gs, ES*/
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
movl %ebx, PT_EAX(%edx)
movl $__USER_DS, PT_DS(%edx)
movl $__USER_DS, PT_ES(%edx)
+ movl $0, PT_GS(%edx)
movl %ebx, PT_ORIG_EAX(%edx)
movl %ecx, PT_EIP(%edx)
movl 12(%esp), %ecx
movl %eax,%cr0
call check_x87
+ call setup_pda
lgdt cpu_gdt_descr
lidt idt_descr
ljmp $(__KERNEL_CS),$1f
movl %eax,%ds
movl %eax,%es
- xorl %eax,%eax # Clear FS/GS and LDT
+ xorl %eax,%eax # Clear FS and LDT
movl %eax,%fs
- movl %eax,%gs
lldt %ax
+
+ movl $(__KERNEL_PDA),%eax
+ mov %eax,%gs
+
cld # gcc2 wants the direction flag cleared at all times
pushl $0 # fake return address for unwinder
#ifdef CONFIG_SMP
.byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */
ret
+/*
+ * Point the GDT at this CPU's PDA. On boot this will be
+ * cpu_gdt_table and boot_pda; for secondary CPUs, these will be
+ * that CPU's GDT and PDA.
+ */
+setup_pda:
+ /* get the PDA pointer */
+ movl start_pda, %eax
+
+ /* slot the PDA address into the GDT */
+ mov cpu_gdt_descr+2, %ecx
+ mov %ax, (__KERNEL_PDA+0+2)(%ecx) /* base & 0x0000ffff */
+ shr $16, %eax
+ mov %al, (__KERNEL_PDA+4+0)(%ecx) /* base & 0x00ff0000 */
+ mov %ah, (__KERNEL_PDA+4+3)(%ecx) /* base & 0xff000000 */
+ ret
+
/*
* setup_idt
*
* This starts the data section.
*/
.data
+ENTRY(start_pda)
+ .long boot_pda
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
# boot GDT descriptor (later on used by CPU#0):
.word 0 # 32 bit align gdt_desc.address
-cpu_gdt_descr:
+ENTRY(cpu_gdt_descr)
.word GDT_ENTRIES*8-1
.long cpu_gdt_table
.quad 0x004092000000ffff /* 0xc8 APM DS data */
.quad 0x00c0920000000000 /* 0xd0 - ESPFIX SS */
- .quad 0x0000000000000000 /* 0xd8 - PDA */
+ .quad 0x00cf92000000ffff /* 0xd8 - PDA */
.quad 0x0000000000000000 /* 0xe0 - unused */
.quad 0x0000000000000000 /* 0xe8 - unused */
.quad 0x0000000000000000 /* 0xf0 - unused */
#include <asm/tlbflush.h>
#include <asm/cpu.h>
+#include <asm/pda.h>
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
regs.xds = __USER_DS;
regs.xes = __USER_DS;
+ regs.xgs = __KERNEL_PDA;
regs.orig_eax = -1;
regs.eip = (unsigned long) kernel_thread_helper;
regs.xcs = __KERNEL_CS | get_kernel_rpl();
p->thread.eip = (unsigned long) ret_from_fork;
savesegment(fs,p->thread.fs);
- savesegment(gs,p->thread.gs);
tsk = current;
if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
load_esp0(tss, next);
/*
- * Save away %fs and %gs. No need to save %es and %ds, as
- * those are always kernel segments while inside the kernel.
- * Doing this before setting the new TLS descriptors avoids
- * the situation where we temporarily have non-reloadable
- * segments in %fs and %gs. This could be an issue if the
- * NMI handler ever used %fs or %gs (it does not today), or
- * if the kernel is running inside of a hypervisor layer.
+ * Save away %fs. No need to save %gs, as it was saved on the
+ * stack on entry. No need to save %es and %ds, as those are
+ * always kernel segments while inside the kernel. Doing this
+ * before setting the new TLS descriptors avoids the situation
+ * where we temporarily have non-reloadable segments in %fs
+ * and %gs. This could be an issue if the NMI handler ever
+ * used %fs or %gs (it does not today), or if the kernel is
+ * running inside of a hypervisor layer.
*/
savesegment(fs, prev->fs);
- savesegment(gs, prev->gs);
/*
* Load the per-thread Thread-Local Storage descriptor.
load_TLS(next, cpu);
/*
- * Restore %fs and %gs if needed.
+ * Restore %fs if needed.
*
- * Glibc normally makes %fs be zero, and %gs is one of
- * the TLS segments.
+ * Glibc normally makes %fs be zero.
*/
if (unlikely(prev->fs | next->fs))
loadsegment(fs, next->fs);
- if (prev->gs | next->gs)
- loadsegment(gs, next->gs);
/*
* Restore IOPL if needed.
X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
- GET_SEG(gs);
+ COPY_SEG(gs);
GET_SEG(fs);
COPY_SEG(es);
COPY_SEG(ds);
{
int tmp, err = 0;
- tmp = 0;
- savesegment(gs, tmp);
- err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
+ err |= __put_user(regs->xgs, (unsigned int __user *)&sc->gs);
savesegment(fs, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
#endif
}
-#define deactivate_mm(tsk, mm) \
- asm("movl %0,%%fs ; movl %0,%%gs": :"r" (0))
+#define deactivate_mm(tsk, mm) \
+ asm("movl %0,%%fs": :"r" (0));
#define activate_mm(prev, next) \
switch_mm((prev),(next),NULL)
.vm86_info = NULL, \
.sysenter_cs = __KERNEL_CS, \
.io_bitmap_ptr = NULL, \
+ .gs = __KERNEL_PDA, \
}
/*
}
#define start_thread(regs, new_eip, new_esp) do { \
- __asm__("movl %0,%%fs ; movl %0,%%gs": :"r" (0)); \
+ __asm__("movl %0,%%fs": :"r" (0)); \
+ regs->xgs = 0; \
set_fs(USER_DS); \
regs->xds = __USER_DS; \
regs->xes = __USER_DS; \
long eax;
int xds;
int xes;
+ /* int xfs; */
+ int xgs;
long orig_eax;
long eip;
int xcs;
return ERR_PTR(retval);
}
-struct pt_regs * __devinit __attribute__((weak)) idle_regs(struct pt_regs *regs)
+noinline struct pt_regs * __devinit __attribute__((weak)) idle_regs(struct pt_regs *regs)
{
memset(regs, 0, sizeof(struct pt_regs));
return regs;
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff