ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
authorLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Thu, 9 May 2013 15:41:59 +0000 (17:41 +0200)
committerSimon Horman <horms+renesas@verge.net.au>
Mon, 22 Jul 2013 01:12:40 +0000 (10:12 +0900)
Create two GPIO-controlled fixed-voltage regulators in the
kzm9g-reference DT and remove manual configuration of the corresponding
GPIOs from board code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
arch/arm/mach-shmobile/board-kzm9g-reference.c

index 11ae9ade5513c154f33c2493ac8a87b7a1af0909..d2b2c9f52c6ffc425f2fc236272b17a02db8fc36 100644 (file)
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "KZM-A9-GT";
                regulator-boot-on;
        };
 
+       vmmc_sdhi0: regulator@2 {
+               compatible = "regulator-fixed";
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       vmmc_sdhi2: regulator@3 {
+               compatible = "regulator-fixed";
+               regulator-name = "SDHI2 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
        lan9220@10000000 {
                compatible = "smsc,lan9220", "smsc,lan9115";
                reg = <0x10000000 0x100>;
        pinctrl-0 = <&sdhi0_pins>;
        pinctrl-names = "default";
 
-       vmmc-supply = <&reg_3p3v>;
+       vmmc-supply = <&vmmc_sdhi0>;
        bus-width = <4>;
        status = "okay";
 };
        pinctrl-0 = <&sdhi2_pins>;
        pinctrl-names = "default";
 
-       vmmc-supply = <&reg_3p3v>;
+       vmmc-supply = <&vmmc_sdhi2>;
        bus-width = <4>;
        broken-cd;
        status = "okay";
index fc2bb3778f3d3ffc45b12c1c6389fb8fd29ab152..1847b4df0eb77f9a5ade259796a39f24d58c62b0 100644 (file)
@@ -21,7 +21,6 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
@@ -37,11 +36,6 @@ static void __init kzm_init(void)
 {
        sh73a0_add_standard_devices_dt();
 
-       /* enable SD */
-       gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
-       gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
 #ifdef CONFIG_CACHE_L2X0
        /* Early BRESP enable, Shared attribute override enable, 64K*8way */
        l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);