#include <linux/usb/otg.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/of.h>
#include "platform_data.h"
#include "core.h"
#include "debug.h"
-static char *maximum_speed = "super";
-module_param(maximum_speed, charp, 0);
-MODULE_PARM_DESC(maximum_speed, "Maximum supported speed.");
-
/* -------------------------------------------------------------------------- */
void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
}
if (node) {
+ dwc->maximum_speed = of_usb_get_maximum_speed(node);
+
dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
} else {
+ dwc->maximum_speed = pdata->maximum_speed;
+
dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
dwc->needs_fifo_resize = pdata->tx_fifo_resize;
}
+ /* default to superspeed if no maximum_speed passed */
+ if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
+ dwc->maximum_speed = USB_SPEED_SUPER;
+
if (IS_ERR(dwc->usb2_phy)) {
ret = PTR_ERR(dwc->usb2_phy);
dev->dma_parms = dev->parent->dma_parms;
dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
- if (!strncmp("super", maximum_speed, 5))
- dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
- else if (!strncmp("high", maximum_speed, 4))
- dwc->maximum_speed = DWC3_DCFG_HIGHSPEED;
- else if (!strncmp("full", maximum_speed, 4))
- dwc->maximum_speed = DWC3_DCFG_FULLSPEED1;
- else if (!strncmp("low", maximum_speed, 3))
- dwc->maximum_speed = DWC3_DCFG_LOWSPEED;
- else
- dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
-
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
pm_runtime_forbid(dev);
* STAR#9000525659: Clock Domain Crossing on DCTL in
* USB 2.0 Mode
*/
- if (dwc->revision < DWC3_REVISION_220A)
+ if (dwc->revision < DWC3_REVISION_220A) {
reg |= DWC3_DCFG_SUPERSPEED;
- else
- reg |= dwc->maximum_speed;
+ } else {
+ switch (dwc->maximum_speed) {
+ case USB_SPEED_LOW:
+ reg |= DWC3_DSTS_LOWSPEED;
+ break;
+ case USB_SPEED_FULL:
+ reg |= DWC3_DSTS_FULLSPEED1;
+ break;
+ case USB_SPEED_HIGH:
+ reg |= DWC3_DSTS_HIGHSPEED;
+ break;
+ case USB_SPEED_SUPER: /* FALLTHROUGH */
+ case USB_SPEED_UNKNOWN: /* FALTHROUGH */
+ default:
+ reg |= DWC3_DSTS_SUPERSPEED;
+ }
+ }
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
dwc->start_config_issued = false;