* user space application). %NL80211_ATTR_FRAME is used to specify the
* frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
* optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- * which channel the frame is to be transmitted or was received. This
- * channel has to be the current channel (remain-on-channel or the
- * operational channel). When called, this operation returns a cookie
- * (%NL80211_ATTR_COOKIE) that will be included with the TX status event
- * pertaining to the TX request.
+ * which channel the frame is to be transmitted or was received. If this
+ * channel is not the current channel (remain-on-channel or the
+ * operational channel) the device will switch to the given channel and
+ * transmit the frame, optionally waiting for a response for the time
+ * specified using %NL80211_ATTR_DURATION. When called, this operation
+ * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ * TX status event pertaining to the TX request.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ * command may be used with the corresponding cookie to cancel the wait
+ * time if it is known that it is no longer necessary.
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
NL80211_CMD_SET_CHANNEL,
NL80211_CMD_SET_WDS_PEER,
+ NL80211_CMD_FRAME_WAIT_CANCEL,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
*
* @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
*
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ * transmitted on another channel when the channel given doesn't match
+ * the current channel. If the current channel doesn't match and this
+ * flag isn't set, the frame will be rejected. This is also used as an
+ * nl80211 capability flag.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_MCAST_RATE,
+ NL80211_ATTR_OFFCHANNEL_TX_OK,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
* @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
* This allows the operation to be terminated prior to timeout based on
* the duration value.
- * @mgmt_tx: Transmit a management frame
+ * @mgmt_tx: Transmit a management frame.
+ * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
+ * frame on another channel
*
* @testmode_cmd: run a test mode command
*
u64 cookie);
int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
- struct ieee80211_channel *chan,
+ struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
- bool channel_type_valid,
+ bool channel_type_valid, unsigned int wait,
const u8 *buf, size_t len, u64 *cookie);
+ int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
+ struct net_device *dev,
+ u64 cookie);
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout);
}
static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
- struct ieee80211_channel *chan,
+ struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
- bool channel_type_valid,
+ bool channel_type_valid, unsigned int wait,
const u8 *buf, size_t len, u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
u32 flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX |
IEEE80211_TX_CTL_REQ_TX_STATUS;
+ if (offchan)
+ return -EOPNOTSUPP;
+
/* Check that we are on the requested channel for transmission */
if (chan != local->tmp_channel &&
chan != local->oper_channel)
void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev);
int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- struct ieee80211_channel *chan,
+ struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
- bool channel_type_valid,
+ bool channel_type_valid, unsigned int wait,
const u8 *buf, size_t len, u64 *cookie);
/* SME */
int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- struct ieee80211_channel *chan,
+ struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
- bool channel_type_valid,
+ bool channel_type_valid, unsigned int wait,
const u8 *buf, size_t len, u64 *cookie)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
return -EINVAL;
/* Transmit the Action frame as requested by user space */
- return rdev->ops->mgmt_tx(&rdev->wiphy, dev, chan, channel_type,
- channel_type_valid, buf, len, cookie);
+ return rdev->ops->mgmt_tx(&rdev->wiphy, dev, chan, offchan,
+ channel_type, channel_type_valid,
+ wait, buf, len, cookie);
}
bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
[NL80211_ATTR_CQM] = { .type = NLA_NESTED, },
[NL80211_ATTR_LOCAL_STATE_CHANGE] = { .type = NLA_FLAG },
[NL80211_ATTR_AP_ISOLATE] = { .type = NLA_U8 },
-
[NL80211_ATTR_WIPHY_TX_POWER_SETTING] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_TX_POWER_LEVEL] = { .type = NLA_U32 },
-
[NL80211_ATTR_FRAME_TYPE] = { .type = NLA_U16 },
-
[NL80211_ATTR_WIPHY_ANTENNA_TX] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_ANTENNA_RX] = { .type = NLA_U32 },
-
[NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 },
+ [NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
CMD(remain_on_channel, REMAIN_ON_CHANNEL);
CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
CMD(mgmt_tx, FRAME);
+ CMD(mgmt_tx_cancel_wait, FRAME_WAIT_CANCEL);
if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
i++;
NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
nla_nest_end(msg, nl_cmds);
+ /* for now at least assume all drivers have it */
+ if (dev->ops->mgmt_tx)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_OFFCHANNEL_TX_OK);
+
if (mgmt_stypes) {
u16 stypes;
struct nlattr *nl_ftypes, *nl_ifs;
void *hdr;
u64 cookie;
struct sk_buff *msg;
+ unsigned int wait = 0;
+ bool offchan;
if (!info->attrs[NL80211_ATTR_FRAME] ||
!info->attrs[NL80211_ATTR_WIPHY_FREQ])
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
+ if (info->attrs[NL80211_ATTR_DURATION]) {
+ if (!rdev->ops->mgmt_tx_cancel_wait)
+ return -EINVAL;
+ wait = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);
+ }
+
if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
channel_type = nla_get_u32(
info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
channel_type_valid = true;
}
+ offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
+
freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
chan = rdev_freq_to_chan(rdev, freq, channel_type);
if (chan == NULL)
err = PTR_ERR(hdr);
goto free_msg;
}
- err = cfg80211_mlme_mgmt_tx(rdev, dev, chan, channel_type,
- channel_type_valid,
+ err = cfg80211_mlme_mgmt_tx(rdev, dev, chan, offchan, channel_type,
+ channel_type_valid, wait,
nla_data(info->attrs[NL80211_ATTR_FRAME]),
nla_len(info->attrs[NL80211_ATTR_FRAME]),
&cookie);
return err;
}
+static int nl80211_tx_mgmt_cancel_wait(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ u64 cookie;
+
+ if (!info->attrs[NL80211_ATTR_COOKIE])
+ return -EINVAL;
+
+ if (!rdev->ops->mgmt_tx_cancel_wait)
+ return -EOPNOTSUPP;
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+ return -EOPNOTSUPP;
+
+ cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
+
+ return rdev->ops->mgmt_tx_cancel_wait(&rdev->wiphy, dev, cookie);
+}
+
static int nl80211_set_power_save(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_FRAME_WAIT_CANCEL,
+ .doit = nl80211_tx_mgmt_cancel_wait,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
{
.cmd = NL80211_CMD_SET_POWER_SAVE,
.doit = nl80211_set_power_save,