netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
- if (new_mtu <= 0 || ll_mtu > 16384)
- return -EINVAL;
-
if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
dev->net->netdev_ops = &ax88178_netdev_ops;
dev->net->ethtool_ops = &ax88178_ethtool_ops;
+ dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
/* Blink LEDS so users know driver saw dongle */
asix_sw_reset(dev, 0, 0);
struct usbnet *dev = netdev_priv(net);
u16 tmp16;
- if (new_mtu <= 0 || new_mtu > 4088)
- return -EINVAL;
-
net->mtu = new_mtu;
dev->hard_mtu = net->mtu + net->hard_header_len;
dev->net->netdev_ops = &ax88179_netdev_ops;
dev->net->ethtool_ops = &ax88179_ethtool_ops;
dev->net->needed_headroom = 8;
+ dev->net->max_mtu = 4088;
/* Initialize MII structure */
dev->mii.dev = dev->net;
return -ENOIOCTLCMD;
}
-static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
- return -EINVAL;
-
- dev->mtu = new_mtu;
- return 0;
-}
-
static const struct net_device_ops usbpn_ops = {
.ndo_open = usbpn_open,
.ndo_stop = usbpn_close,
.ndo_start_xmit = usbpn_xmit,
.ndo_do_ioctl = usbpn_ioctl,
- .ndo_change_mtu = usbpn_set_mtu,
};
static void usbpn_setup(struct net_device *dev)
dev->type = ARPHRD_PHONET;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
dev->mtu = PHONET_MAX_MTU;
+ dev->min_mtu = PHONET_MIN_MTU;
+ dev->max_mtu = PHONET_MAX_MTU;
dev->hard_header_len = 1;
dev->dev_addr[0] = PN_MEDIA_USB;
dev->addr_len = 1;
int cdc_ncm_change_mtu(struct net_device *net, int new_mtu)
{
struct usbnet *dev = netdev_priv(net);
- int maxmtu = cdc_ncm_max_dgram_size(dev) - cdc_ncm_eth_hlen(dev);
-
- if (new_mtu <= 0 || new_mtu > maxmtu)
- return -EINVAL;
net->mtu = new_mtu;
cdc_ncm_set_dgram_size(dev, new_mtu + cdc_ncm_eth_hlen(dev));
/* must handle MTU changes */
dev->net->netdev_ops = &cdc_ncm_netdev_ops;
+ dev->net->max_mtu = cdc_ncm_max_dgram_size(dev) - cdc_ncm_eth_hlen(dev);
return 0;
int old_rx_urb_size = dev->rx_urb_size;
int ret;
- if (new_mtu > MAX_SINGLE_PACKET_SIZE)
- return -EINVAL;
-
- if (new_mtu <= 0)
- return -EINVAL;
/* no second zero-length packet read wanted after mtu-sized packets */
if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
if (netdev->mtu > (dev->hard_mtu - netdev->hard_header_len))
netdev->mtu = dev->hard_mtu - netdev->hard_header_len;
+ /* MTU range: 68 - 9000 */
+ netdev->max_mtu = MAX_SINGLE_PACKET_SIZE;
+
dev->ep_blkin = (intf->cur_altsetting)->endpoint + 0;
dev->ep_blkout = (intf->cur_altsetting)->endpoint + 1;
dev->ep_intr = (intf->cur_altsetting)->endpoint + 2;
break;
}
- if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU)
- return -EINVAL;
-
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
return ret;
netdev->ethtool_ops = &ops;
netif_set_gso_max_size(netdev, RTL_LIMITED_TSO_SIZE);
+ /* MTU range: 68 - 1500 or 9194 */
+ netdev->min_mtu = ETH_MIN_MTU;
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ netdev->max_mtu = ETH_DATA_LEN;
+ break;
+ default:
+ netdev->max_mtu = RTL8153_MAX_MTU;
+ break;
+ }
+
tp->mii.dev = netdev;
tp->mii.mdio_read = read_mii_word;
tp->mii.mdio_write = write_mii_word;
/* Forward definitions */
static void sierra_sync_timer(unsigned long syncdata);
-static int sierra_net_change_mtu(struct net_device *net, int new_mtu);
/* Our own net device operations structure */
static const struct net_device_ops sierra_net_device_ops = {
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
- .ndo_change_mtu = sierra_net_change_mtu,
+ .ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
.nway_reset = usbnet_nway_reset,
};
-/* MTU can not be more than 1500 bytes, enforce it. */
-static int sierra_net_change_mtu(struct net_device *net, int new_mtu)
-{
- if (new_mtu > SIERRA_NET_MAX_SUPPORTED_MTU)
- return -EINVAL;
-
- return usbnet_change_mtu(net, new_mtu);
-}
-
static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap)
{
int result = 0;
dev->net->hard_header_len += SIERRA_NET_HIP_EXT_HDR_LEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+ dev->net->max_mtu = SIERRA_NET_MAX_SUPPORTED_MTU;
/* Set up the netdev */
dev->net->flags |= IFF_NOARP;
struct usbnet *dev = netdev_priv(netdev);
int ret;
- if (new_mtu > MAX_SINGLE_PACKET_SIZE)
- return -EINVAL;
-
ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set mac rx frame length\n");
dev->net->flags |= IFF_MULTICAST;
dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+ dev->net->max_mtu = MAX_SINGLE_PACKET_SIZE;
return 0;
}
int old_hard_mtu = dev->hard_mtu;
int old_rx_urb_size = dev->rx_urb_size;
- if (new_mtu <= 0)
- return -EINVAL;
// no second zero-length packet read wanted after mtu-sized packets
if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
* bind() should set rx_urb_size in that case.
*/
dev->hard_mtu = net->mtu + net->hard_header_len;
+ net->min_mtu = 0;
+ net->max_mtu = ETH_MAX_MTU;
net->netdev_ops = &usbnet_netdev_ops;
net->watchdog_timeo = TX_TIMEOUT_JIFFIES;