Needed for occlusion queries on rv530 chips.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
/* rv350,rv370,rv380 */
rdev->num_gb_pipes = 1;
}
+ rdev->num_z_pipes = 1;
gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
switch (rdev->num_gb_pipes) {
case 2:
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+ DRM_INFO("radeon: %d quad pipes, %d Z pipes initialized.\n",
+ rdev->num_gb_pipes, rdev->num_z_pipes);
}
int r300_ga_reset(struct radeon_device *rdev)
printk(KERN_WARNING "Failed to wait GUI idle while "
"programming pipes. Bad things might happen.\n");
}
- DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+
+ if (rdev->family == CHIP_RV530) {
+ tmp = RREG32(RV530_GB_PIPE_SELECT2);
+ if ((tmp & 3) == 3)
+ rdev->num_z_pipes = 2;
+ else
+ rdev->num_z_pipes = 1;
+ } else
+ rdev->num_z_pipes = 1;
+
+ DRM_INFO("radeon: %d quad pipes, %d z pipes initialized.\n",
+ rdev->num_gb_pipes, rdev->num_z_pipes);
}
void r420_gpu_init(struct radeon_device *rdev)
*/
/* workaround for RV530 */
if (rdev->family == CHIP_RV530) {
- WREG32(0x4124, 1);
WREG32(0x4128, 0xFF);
}
r420_pipes_init(rdev);
int usec_timeout;
enum radeon_pll_errata pll_errata;
int num_gb_pipes;
+ int num_z_pipes;
int disp_priority;
/* BIOS */
uint8_t *bios;
{
uint32_t gb_tile_config, gb_pipe_sel = 0;
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) {
+ uint32_t z_pipe_sel = RADEON_READ(RV530_GB_PIPE_SELECT2);
+ if ((z_pipe_sel & 3) == 3)
+ dev_priv->num_z_pipes = 2;
+ else
+ dev_priv->num_z_pipes = 1;
+ } else
+ dev_priv->num_z_pipes = 1;
+
/* RS4xx/RS6xx/R4xx/R5xx */
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
* 1.30- Add support for occlusion queries
+ * 1.31- Add support for num Z pipes from GET_PARAM
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 30
+#define DRIVER_MINOR 31
#define DRIVER_PATCHLEVEL 0
/*
resource_size_t fb_aper_offset;
int num_gb_pipes;
+ int num_z_pipes;
int track_flush;
drm_local_map_t *mmio;
/* pipe config regs */
#define R400_GB_PIPE_SELECT 0x402c
+#define RV530_GB_PIPE_SELECT2 0x4124
#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */
#define R300_GB_TILE_CONFIG 0x4018
# define R300_ENABLE_TILING (1 << 0)
case RADEON_INFO_NUM_GB_PIPES:
value = rdev->num_gb_pipes;
break;
+ case RADEON_INFO_NUM_Z_PIPES:
+ value = rdev->num_z_pipes;
+ break;
default:
DRM_DEBUG("Invalid request %d\n", info->request);
return -EINVAL;
#define RADEON_SCRATCH_REG4 0x15f0
#define RADEON_SCRATCH_REG5 0x15f4
+#define RV530_GB_PIPE_SELECT2 0x4124
+
#endif
case RADEON_PARAM_NUM_GB_PIPES:
value = dev_priv->num_gb_pipes;
break;
+ case RADEON_PARAM_NUM_Z_PIPES:
+ value = dev_priv->num_z_pipes;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", param->param);
return -EINVAL;
#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
#define RADEON_PARAM_DEVICE_ID 16
+#define RADEON_PARAM_NUM_Z_PIPES 17 /* num Z pipes */
typedef struct drm_radeon_getparam {
int param;
#define RADEON_INFO_DEVICE_ID 0x00
#define RADEON_INFO_NUM_GB_PIPES 0x01
+#define RADEON_INFO_NUM_Z_PIPES 0x02
struct drm_radeon_info {
uint32_t request;