drm/mediatek: fixed the calc method of data rate per lane
authorJitao Shi <jitao.shi@mediatek.com>
Wed, 16 Nov 2016 03:20:54 +0000 (11:20 +0800)
committerCK Hu <ck.hu@mediatek.com>
Thu, 24 Nov 2016 06:53:14 +0000 (14:53 +0800)
Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e.
Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP
mode, those signals will cause h-time larger than normal and reduce FPS.
So need to multiply a coefficient to offset the extra signal's effect.
  coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+
 Ths_trail+Ths_exit)/(htotal*bpp/lane_number)

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
drivers/gpu/drm/mediatek/mtk_dsi.c

index 28b2044ed9f285ad7c1bf1441822c3bcd24d9196..eaa5a2240c0c9db36b3ca918e589e117aee01077 100644 (file)
@@ -86,7 +86,7 @@
 
 #define DSI_PHY_TIMECON0       0x110
 #define LPX                            (0xff << 0)
-#define HS_PRPR                                (0xff << 8)
+#define HS_PREP                                (0xff << 8)
 #define HS_ZERO                                (0xff << 16)
 #define HS_TRAIL                       (0xff << 24)
 
 #define CLK_TRAIL                      (0xff << 24)
 
 #define DSI_PHY_TIMECON3       0x11c
-#define CLK_HS_PRPR                    (0xff << 0)
+#define CLK_HS_PREP                    (0xff << 0)
 #define CLK_HS_POST                    (0xff << 8)
 #define CLK_HS_EXIT                    (0xff << 16)
 
+#define T_LPX          5
+#define T_HS_PREP      6
+#define T_HS_TRAIL     8
+#define T_HS_EXIT      7
+#define T_HS_ZERO      10
+
 #define NS_TO_CYCLE(n, c)    ((n) / (c) + (((n) % (c)) ? 1 : 0))
 
 struct phy;
@@ -161,20 +167,18 @@ static void mtk_dsi_mask(struct mtk_dsi *dsi, u32 offset, u32 mask, u32 data)
 static void dsi_phy_timconfig(struct mtk_dsi *dsi)
 {
        u32 timcon0, timcon1, timcon2, timcon3;
-       unsigned int ui, cycle_time;
-       unsigned int lpx;
+       u32 ui, cycle_time;
 
        ui = 1000 / dsi->data_rate + 0x01;
        cycle_time = 8000 / dsi->data_rate + 0x01;
-       lpx = 5;
 
-       timcon0 = (8 << 24) | (0xa << 16) | (0x6 << 8) | lpx;
-       timcon1 = (7 << 24) | (5 * lpx << 16) | ((3 * lpx) / 2) << 8 |
-                 (4 * lpx);
+       timcon0 = T_LPX | T_HS_PREP << 8 | T_HS_ZERO << 16 | T_HS_TRAIL << 24;
+       timcon1 = 4 * T_LPX | (3 * T_LPX / 2) << 8 | 5 * T_LPX << 16 |
+                 T_HS_EXIT << 24;
        timcon2 = ((NS_TO_CYCLE(0x64, cycle_time) + 0xa) << 24) |
                  (NS_TO_CYCLE(0x150, cycle_time) << 16);
-       timcon3 = (2 * lpx) << 16 | NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8 |
-                  NS_TO_CYCLE(0x40, cycle_time);
+       timcon3 = NS_TO_CYCLE(0x40, cycle_time) | (2 * T_LPX) << 16 |
+                 NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8;
 
        writel(timcon0, dsi->regs + DSI_PHY_TIMECON0);
        writel(timcon1, dsi->regs + DSI_PHY_TIMECON1);
@@ -202,19 +206,47 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
 {
        struct device *dev = dsi->dev;
        int ret;
+       u64 pixel_clock, total_bits;
+       u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits;
 
        if (++dsi->refcount != 1)
                return 0;
 
+       switch (dsi->format) {
+       case MIPI_DSI_FMT_RGB565:
+               bit_per_pixel = 16;
+               break;
+       case MIPI_DSI_FMT_RGB666_PACKED:
+               bit_per_pixel = 18;
+               break;
+       case MIPI_DSI_FMT_RGB666:
+       case MIPI_DSI_FMT_RGB888:
+       default:
+               bit_per_pixel = 24;
+               break;
+       }
+
        /**
-        * data_rate = (pixel_clock / 1000) * pixel_dipth * mipi_ratio;
-        * pixel_clock unit is Khz, data_rata unit is MHz, so need divide 1000.
-        * mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi.
-        * we set mipi_ratio is 1.05.
+        * vm.pixelclock is in kHz, pixel_clock unit is Hz, so multiply by 1000
+        * htotal_time = htotal * byte_per_pixel / num_lanes
+        * overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit
+        * mipi_ratio = (htotal_time + overhead_time) / htotal_time
+        * data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes;
         */
-       dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10);
+       pixel_clock = dsi->vm.pixelclock * 1000;
+       htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch +
+                       dsi->vm.hsync_len;
+       htotal_bits = htotal * bit_per_pixel;
+
+       overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL +
+                       T_HS_EXIT;
+       overhead_bits = overhead_cycles * dsi->lanes * 8;
+       total_bits = htotal_bits + overhead_bits;
+
+       dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits,
+                                         htotal * dsi->lanes);
 
-       ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 1000000);
+       ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
        if (ret < 0) {
                dev_err(dev, "Failed to set data rate: %d\n", ret);
                goto err_refcount;