The X86_32-only disable_hlt/enable_hlt mechanism was used by the
32-bit floppy driver. Its effect was to replace the use of the
HLT instruction inside default_idle() with cpu_relax() - essentially
it turned off the use of HLT.
This workaround was commented in the code as:
"disable hlt during certain critical i/o operations"
"This halt magic was a workaround for ancient floppy DMA
wreckage. It should be safe to remove."
H. Peter Anvin additionally adds:
"To the best of my knowledge, no-hlt only existed because of
flaky power distributions on 386/486 systems which were sold to
run DOS. Since DOS did no power management of any kind,
including HLT, the power draw was fairly uniform; when exposed
to the much hhigher noise levels you got when Linux used HLT
caused some of these systems to fail.
They were by far in the minority even back then."
Alan Cox further says:
"Also for the Cyrix 5510 which tended to go castors up if a HLT
occurred during a DMA cycle and on a few other boxes HLT during
DMA tended to go astray.
Do we care ? I doubt it. The 5510 was pretty obscure, the 5520
fixed it, the 5530 is probably the oldest still in any kind of
use."
So, let's finally drop this.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Stephen Hemminger <shemminger@vyatta.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org
[ If anyone cares then alternative instruction patching could be
used to replace HLT with a one-byte NOP instruction. Much simpler. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---------------------------
-What: x86 floppy disable_hlt
-When: 2012
-Why: ancient workaround of dubious utility clutters the
- code used by everybody else.
-Who: Len Brown <len.brown@intel.com>
-
----------------------------
-
What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle
When: 2012
Why: This optional sub-feature of APM is of dubious reliability,
#define cpu_has_amd_erratum(x) (false)
#endif /* CONFIG_CPU_SUP_AMD */
-#ifdef CONFIG_X86_32
-/*
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-#endif
-
-void disable_hlt(void);
-void enable_hlt(void);
-
void cpu_idle_wait(void);
extern unsigned long arch_align_stack(unsigned long sp);
EXPORT_SYMBOL(pm_idle);
#endif
-#ifdef CONFIG_X86_32
-/*
- * This halt magic was a workaround for ancient floppy DMA
- * wreckage. It should be safe to remove.
- */
-static int hlt_counter;
-void disable_hlt(void)
-{
- hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
- hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
-static inline int hlt_use_halt(void)
-{
- return (!hlt_counter && boot_cpu_data.hlt_works_ok);
-}
-#else
static inline int hlt_use_halt(void)
{
return 1;
}
-#endif
#ifndef CONFIG_SMP
static inline void play_dead(void)
return 0;
}
-static DEFINE_SPINLOCK(floppy_hlt_lock);
-static int hlt_disabled;
-static void floppy_disable_hlt(void)
-{
- unsigned long flags;
-
- WARN_ONCE(1, "floppy_disable_hlt() scheduled for removal in 2012");
- spin_lock_irqsave(&floppy_hlt_lock, flags);
- if (!hlt_disabled) {
- hlt_disabled = 1;
-#ifdef HAVE_DISABLE_HLT
- disable_hlt();
-#endif
- }
- spin_unlock_irqrestore(&floppy_hlt_lock, flags);
-}
-
-static void floppy_enable_hlt(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&floppy_hlt_lock, flags);
- if (hlt_disabled) {
- hlt_disabled = 0;
-#ifdef HAVE_DISABLE_HLT
- enable_hlt();
-#endif
- }
- spin_unlock_irqrestore(&floppy_hlt_lock, flags);
-}
-
static void setup_DMA(void)
{
unsigned long f;
fd_enable_dma();
release_dma_lock(f);
#endif
- floppy_disable_hlt();
}
static void show_floppy(void);
fd_disable_dma();
release_dma_lock(f);
- floppy_enable_hlt();
do_floppy = NULL;
if (fdc >= N_FDC || FDCS->address == -1) {
/* we don't even know which FDC is the culprit */
show_floppy();
cancel_activity();
- floppy_enable_hlt();
-
flags = claim_dma_lock();
fd_disable_dma();
release_dma_lock(flags);
#if N_FDC > 1
set_dor(1, ~8, 0);
#endif
- floppy_enable_hlt();
if (floppy_track_buffer && max_buffer_sectors) {
tmpsize = max_buffer_sectors * 1024;