/**
* eeh_gather_pci_data - Copy assorted PCI config space registers to buff
- * @pdn: device to report data for
+ * @edev: device to report data for
* @buf: point to buffer in which to log
* @len: amount of room in buffer
*
* This routine captures assorted PCI configuration space data,
* and puts them into a buffer for RTAS error logging.
*/
-static size_t eeh_gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
+static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
{
- struct pci_dev *dev = pdn->pcidev;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
u32 cfg;
int cap, i;
int n = 0;
- n += scnprintf(buf+n, len-n, "%s\n", pdn->node->full_name);
- printk(KERN_WARNING "EEH: of node=%s\n", pdn->node->full_name);
+ n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
+ printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
- rtas_read_config(pdn, PCI_VENDOR_ID, 4, &cfg);
+ rtas_read_config(PCI_DN(dn), PCI_VENDOR_ID, 4, &cfg);
n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
- rtas_read_config(pdn, PCI_COMMAND, 4, &cfg);
+ rtas_read_config(PCI_DN(dn), PCI_COMMAND, 4, &cfg);
n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
/* Gather bridge-specific registers */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
- rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
+ rtas_read_config(PCI_DN(dn), PCI_SEC_STATUS, 2, &cfg);
n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
- rtas_read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg);
+ rtas_read_config(PCI_DN(dn), PCI_BRIDGE_CONTROL, 2, &cfg);
n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
}
/* Dump out the PCI-X command and status regs */
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (cap) {
- rtas_read_config(pdn, cap, 4, &cfg);
+ rtas_read_config(PCI_DN(dn), cap, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
- rtas_read_config(pdn, cap+4, 4, &cfg);
+ rtas_read_config(PCI_DN(dn), cap+4, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
}
"EEH: PCI-E capabilities and status follow:\n");
for (i=0; i<=8; i++) {
- rtas_read_config(pdn, cap+4*i, 4, &cfg);
+ rtas_read_config(PCI_DN(dn), cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
}
"EEH: PCI-E AER capability register set follows:\n");
for (i=0; i<14; i++) {
- rtas_read_config(pdn, cap+4*i, 4, &cfg);
+ rtas_read_config(PCI_DN(dn), cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
}
/* Gather status on devices under the bridge */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
- struct device_node *dn;
+ struct device_node *child;
- for_each_child_of_node(pdn->node, dn) {
- pdn = PCI_DN(dn);
- if (pdn)
- n += eeh_gather_pci_data(pdn, buf+n, len-n);
+ for_each_child_of_node(dn, child) {
+ if (of_node_to_eeh_dev(child))
+ n += eeh_gather_pci_data(of_node_to_eeh_dev(child), buf+n, len-n);
}
}
/**
* eeh_slot_error_detail - Generate combined log including driver log and error log
- * @pdn: device node
+ * @edev: device to report error log for
* @severity: temporary or permanent error log
*
* This routine should be called to generate the combined log, which
* out from the config space of the corresponding PCI device, while
* the error log is fetched through platform dependent function call.
*/
-void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
+void eeh_slot_error_detail(struct eeh_dev *edev, int severity)
{
size_t loglen = 0;
pci_regs_buf[0] = 0;
- eeh_pci_enable(pdn, EEH_OPT_THAW_MMIO);
- eeh_ops->configure_bridge(pdn->node);
- eeh_restore_bars(pdn);
- loglen = eeh_gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
+ eeh_pci_enable(edev, EEH_OPT_THAW_MMIO);
+ eeh_ops->configure_bridge(eeh_dev_to_of_node(edev));
+ eeh_restore_bars(edev);
+ loglen = eeh_gather_pci_data(edev, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
- eeh_ops->get_log(pdn->node, severity, pci_regs_buf, loglen);
+ eeh_ops->get_log(eeh_dev_to_of_node(edev), severity, pci_regs_buf, loglen);
}
/**
*/
struct device_node *eeh_find_device_pe(struct device_node *dn)
{
- while ((dn->parent) && PCI_DN(dn->parent) &&
- (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+ while (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+ (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) {
dn = dn->parent;
}
return dn;
struct device_node *dn;
for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
+ if (of_node_to_eeh_dev(dn)) {
/* Mark the pci device driver too */
- struct pci_dev *dev = PCI_DN(dn)->pcidev;
+ struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev;
- PCI_DN(dn)->eeh_mode |= mode_flag;
+ of_node_to_eeh_dev(dn)->mode |= mode_flag;
if (dev && dev->driver)
dev->error_state = pci_channel_io_frozen;
dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent;
- PCI_DN(dn)->eeh_mode |= mode_flag;
+ of_node_to_eeh_dev(dn)->mode |= mode_flag;
/* Mark the pci device too */
- dev = PCI_DN(dn)->pcidev;
+ dev = of_node_to_eeh_dev(dn)->pdev;
if (dev)
dev->error_state = pci_channel_io_frozen;
struct device_node *dn;
for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
- PCI_DN(dn)->eeh_mode &= ~mode_flag;
- PCI_DN(dn)->eeh_check_count = 0;
+ if (of_node_to_eeh_dev(dn)) {
+ of_node_to_eeh_dev(dn)->mode &= ~mode_flag;
+ of_node_to_eeh_dev(dn)->check_count = 0;
__eeh_clear_slot(dn, mode_flag);
}
}
dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent;
- PCI_DN(dn)->eeh_mode &= ~mode_flag;
- PCI_DN(dn)->eeh_check_count = 0;
+ of_node_to_eeh_dev(dn)->mode &= ~mode_flag;
+ of_node_to_eeh_dev(dn)->check_count = 0;
__eeh_clear_slot(dn, mode_flag);
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
}
{
int ret;
unsigned long flags;
- struct pci_dn *pdn;
+ struct eeh_dev *edev;
int rc = 0;
const char *location;
return 0;
}
dn = eeh_find_device_pe(dn);
- pdn = PCI_DN(dn);
+ edev = of_node_to_eeh_dev(dn);
/* Access to IO BARs might get this far and still not want checking. */
- if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
- pdn->eeh_mode & EEH_MODE_NOCHECK) {
+ if (!(edev->mode & EEH_MODE_SUPPORTED) ||
+ edev->mode & EEH_MODE_NOCHECK) {
ignored_check++;
pr_debug("EEH: Ignored check (%x) for %s %s\n",
- pdn->eeh_mode, eeh_pci_name(dev), dn->full_name);
+ edev->mode, eeh_pci_name(dev), dn->full_name);
return 0;
}
- if (!pdn->eeh_config_addr && !pdn->eeh_pe_config_addr) {
+ if (!edev->config_addr && !edev->pe_config_addr) {
no_cfg_addr++;
return 0;
}
*/
raw_spin_lock_irqsave(&confirm_error_lock, flags);
rc = 1;
- if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
- pdn->eeh_check_count ++;
- if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+ if (edev->mode & EEH_MODE_ISOLATED) {
+ edev->check_count++;
+ if (edev->check_count % EEH_MAX_FAILS == 0) {
location = of_get_property(dn, "ibm,loc-code", NULL);
printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n",
- pdn->eeh_check_count, location,
+ edev->check_count, location,
eeh_driver_name(dev), eeh_pci_name(dev));
printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
eeh_driver_name(dev));
* function zero of a multi-function device.
* In any case they must share a common PHB.
*/
- ret = eeh_ops->get_state(pdn->node, NULL);
+ ret = eeh_ops->get_state(dn, NULL);
/* Note that config-io to empty slots may fail;
* they are empty when they don't have children.
(ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
(EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
false_positives++;
- pdn->eeh_false_positives ++;
+ edev->false_positives ++;
rc = 0;
goto dn_unlock;
}
eeh_mark_slot(dn, EEH_MODE_ISOLATED);
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
- eeh_send_failure_event(dn, dev);
+ eeh_send_failure_event(edev->dn, edev->pdev);
/* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure
/**
* eeh_pci_enable - Enable MMIO or DMA transfers for this slot
- * @pdn pci device node
+ * @edev: pci device node
*
* This routine should be called to reenable frozen MMIO or DMA
* so that it would work correctly again. It's useful while doing
* recovery or log collection on the indicated device.
*/
-int eeh_pci_enable(struct pci_dn *pdn, int function)
+int eeh_pci_enable(struct eeh_dev *edev, int function)
{
int rc;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
- rc = eeh_ops->set_option(pdn->node, function);
+ rc = eeh_ops->set_option(dn, function);
if (rc)
printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
- function, rc, pdn->node->full_name);
+ function, rc, dn->full_name);
- rc = eeh_ops->wait_state(pdn->node, PCI_BUS_RESET_WAIT_MSEC);
+ rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
(function == EEH_OPT_THAW_MMIO))
return 0;
struct device_node *dn;
for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
- struct pci_dev *dev = PCI_DN(dn)->pcidev;
+ if (of_node_to_eeh_dev(dn)) {
+ struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev;
if (dev && dev->driver)
*freset |= dev->needs_freset;
dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent;
- dev = PCI_DN(dn)->pcidev;
+ dev = of_node_to_eeh_dev(dn)->pdev;
if (dev)
*freset |= dev->needs_freset;
/**
* eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
- * @pdn: pci device node to be reset.
+ * @edev: pci device node to be reset.
*
* Assert the PCI #RST line for 1/4 second.
*/
-static void eeh_reset_pe_once(struct pci_dn *pdn)
+static void eeh_reset_pe_once(struct eeh_dev *edev)
{
unsigned int freset = 0;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
/* Determine type of EEH reset required for
* Partitionable Endpoint, a hot-reset (1)
* A fundamental reset required by any device under
* Partitionable Endpoint trumps hot-reset.
*/
- eeh_set_pe_freset(pdn->node, &freset);
+ eeh_set_pe_freset(dn, &freset);
if (freset)
- eeh_ops->reset(pdn->node, EEH_RESET_FUNDAMENTAL);
+ eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL);
else
- eeh_ops->reset(pdn->node, EEH_RESET_HOT);
+ eeh_ops->reset(dn, EEH_RESET_HOT);
/* The PCI bus requires that the reset be held high for at least
* a 100 milliseconds. We wait a bit longer 'just in case'.
* pci slot reset line is dropped. Make sure we don't miss
* these, and clear the flag now.
*/
- eeh_clear_slot(pdn->node, EEH_MODE_ISOLATED);
+ eeh_clear_slot(dn, EEH_MODE_ISOLATED);
- eeh_ops->reset(pdn->node, EEH_RESET_DEACTIVATE);
+ eeh_ops->reset(dn, EEH_RESET_DEACTIVATE);
/* After a PCI slot has been reset, the PCI Express spec requires
* a 1.5 second idle time for the bus to stabilize, before starting
/**
* eeh_reset_pe - Reset the indicated PE
- * @pdn: PCI device node
+ * @edev: PCI device associated EEH device
*
* This routine should be called to reset indicated device, including
* PE. A PE might include multiple PCI devices and sometimes PCI bridges
* might be involved as well.
*/
-int eeh_reset_pe(struct pci_dn *pdn)
+int eeh_reset_pe(struct eeh_dev *edev)
{
int i, rc;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
/* Take three shots at resetting the bus */
for (i=0; i<3; i++) {
- eeh_reset_pe_once(pdn);
+ eeh_reset_pe_once(edev);
- rc = eeh_ops->wait_state(pdn->node, PCI_BUS_RESET_WAIT_MSEC);
+ rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
return 0;
if (rc < 0) {
printk(KERN_ERR "EEH: unrecoverable slot failure %s\n",
- pdn->node->full_name);
+ dn->full_name);
return -1;
}
printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n",
- i+1, pdn->node->full_name, rc);
+ i+1, dn->full_name, rc);
}
return -1;
/**
* eeh_restore_one_device_bars - Restore the Base Address Registers for one device
- * @pdn: pci device node
+ * @edev: PCI device associated EEH device
*
* Loads the PCI configuration space base address registers,
* the expansion ROM base address, the latency timer, and etc.
* from the saved values in the device node.
*/
-static inline void eeh_restore_one_device_bars(struct pci_dn *pdn)
+static inline void eeh_restore_one_device_bars(struct eeh_dev *edev)
{
int i;
u32 cmd;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
+
+ if (!edev->phb)
+ return;
- if (NULL==pdn->phb) return;
for (i=4; i<10; i++) {
- rtas_write_config(pdn, i*4, 4, pdn->config_space[i]);
+ rtas_write_config(PCI_DN(dn), i*4, 4, edev->config_space[i]);
}
/* 12 == Expansion ROM Address */
- rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]);
+ rtas_write_config(PCI_DN(dn), 12*4, 4, edev->config_space[12]);
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
-#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
+#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
- rtas_write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
+ rtas_write_config(PCI_DN(dn), PCI_CACHE_LINE_SIZE, 1,
SAVED_BYTE(PCI_CACHE_LINE_SIZE));
- rtas_write_config(pdn, PCI_LATENCY_TIMER, 1,
+ rtas_write_config(PCI_DN(dn), PCI_LATENCY_TIMER, 1,
SAVED_BYTE(PCI_LATENCY_TIMER));
/* max latency, min grant, interrupt pin and line */
- rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+ rtas_write_config(PCI_DN(dn), 15*4, 4, edev->config_space[15]);
/* Restore PERR & SERR bits, some devices require it,
* don't touch the other command bits
*/
- rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
- if (pdn->config_space[1] & PCI_COMMAND_PARITY)
+ rtas_read_config(PCI_DN(dn), PCI_COMMAND, 4, &cmd);
+ if (edev->config_space[1] & PCI_COMMAND_PARITY)
cmd |= PCI_COMMAND_PARITY;
else
cmd &= ~PCI_COMMAND_PARITY;
- if (pdn->config_space[1] & PCI_COMMAND_SERR)
+ if (edev->config_space[1] & PCI_COMMAND_SERR)
cmd |= PCI_COMMAND_SERR;
else
cmd &= ~PCI_COMMAND_SERR;
- rtas_write_config(pdn, PCI_COMMAND, 4, cmd);
+ rtas_write_config(PCI_DN(dn), PCI_COMMAND, 4, cmd);
}
/**
* eeh_restore_bars - Restore the PCI config space info
- * @pdn: PCI device node
+ * @edev: EEH device
*
* This routine performs a recursive walk to the children
* of this device as well.
*/
-void eeh_restore_bars(struct pci_dn *pdn)
+void eeh_restore_bars(struct eeh_dev *edev)
{
struct device_node *dn;
- if (!pdn)
+ if (!edev)
return;
- if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
- eeh_restore_one_device_bars(pdn);
+ if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code))
+ eeh_restore_one_device_bars(edev);
- for_each_child_of_node(pdn->node, dn)
- eeh_restore_bars(PCI_DN(dn));
+ for_each_child_of_node(eeh_dev_to_of_node(edev), dn)
+ eeh_restore_bars(of_node_to_eeh_dev(dn));
}
/**
* eeh_save_bars - Save device bars
- * @pdn: PCI device node
+ * @edev: PCI device associated EEH device
*
* Save the values of the device bars. Unlike the restore
* routine, this routine is *not* recursive. This is because
* PCI devices are added individually; but, for the restore,
* an entire slot is reset at a time.
*/
-static void eeh_save_bars(struct pci_dn *pdn)
+static void eeh_save_bars(struct eeh_dev *edev)
{
int i;
+ struct device_node *dn;
- if (!pdn )
+ if (!edev)
return;
+ dn = eeh_dev_to_of_node(edev);
for (i = 0; i < 16; i++)
- rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]);
+ rtas_read_config(PCI_DN(dn), i * 4, 4, &edev->config_space[i]);
}
/**
const u32 *device_id = of_get_property(dn, "device-id", NULL);
const u32 *regs;
int enable;
- struct pci_dn *pdn = PCI_DN(dn);
+ struct eeh_dev *edev = of_node_to_eeh_dev(dn);
- pdn->class_code = 0;
- pdn->eeh_mode = 0;
- pdn->eeh_check_count = 0;
- pdn->eeh_freeze_count = 0;
- pdn->eeh_false_positives = 0;
+ edev->class_code = 0;
+ edev->mode = 0;
+ edev->check_count = 0;
+ edev->freeze_count = 0;
+ edev->false_positives = 0;
if (!of_device_is_available(dn))
return NULL;
/* There is nothing to check on PCI to ISA bridges */
if (dn->type && !strcmp(dn->type, "isa")) {
- pdn->eeh_mode |= EEH_MODE_NOCHECK;
+ edev->mode |= EEH_MODE_NOCHECK;
return NULL;
}
- pdn->class_code = *class_code;
+ edev->class_code = *class_code;
/* Ok... see if this device supports EEH. Some do, some don't,
* and the only way to find out is to check each and every one.
enable = 0;
if (ret == 0) {
- pdn->eeh_config_addr = regs[0];
+ edev->config_addr = regs[0];
/* If the newer, better, ibm,get-config-addr-info is supported,
* then use that instead.
*/
- pdn->eeh_pe_config_addr = eeh_ops->get_pe_addr(dn);
+ edev->pe_config_addr = eeh_ops->get_pe_addr(dn);
/* Some older systems (Power4) allow the
* ibm,set-eeh-option call to succeed even on nodes
* where EEH is not supported. Verify support
* explicitly.
*/
- ret = eeh_ops->get_state(pdn->node, NULL);
+ ret = eeh_ops->get_state(dn, NULL);
if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
enable = 1;
}
if (enable) {
eeh_subsystem_enabled = 1;
- pdn->eeh_mode |= EEH_MODE_SUPPORTED;
+ edev->mode |= EEH_MODE_SUPPORTED;
pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n",
- dn->full_name, pdn->eeh_config_addr,
- pdn->eeh_pe_config_addr);
+ dn->full_name, edev->config_addr,
+ edev->pe_config_addr);
} else {
/* This device doesn't support EEH, but it may have an
* EEH parent, in which case we mark it as supported.
*/
- if (dn->parent && PCI_DN(dn->parent)
- && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+ if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+ (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) {
/* Parent supports EEH. */
- pdn->eeh_mode |= EEH_MODE_SUPPORTED;
- pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr;
+ edev->mode |= EEH_MODE_SUPPORTED;
+ edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
return NULL;
}
}
dn->full_name);
}
- eeh_save_bars(pdn);
+ eeh_save_bars(edev);
return NULL;
}
unsigned long buid;
buid = get_phb_buid(phb);
- if (buid == 0 || PCI_DN(phb) == NULL)
+ if (buid == 0 || !of_node_to_eeh_dev(phb))
continue;
traverse_pci_devices(phb, eeh_early_enable, NULL);
{
struct pci_controller *phb;
- if (!dn || !PCI_DN(dn))
+ if (!dn || !of_node_to_eeh_dev(dn))
return;
- phb = PCI_DN(dn)->phb;
+ phb = of_node_to_eeh_dev(dn)->phb;
/* USB Bus children of PCI devices will not have BUID's */
if (NULL == phb || 0 == phb->buid)
static void eeh_add_device_late(struct pci_dev *dev)
{
struct device_node *dn;
- struct pci_dn *pdn;
+ struct eeh_dev *edev;
if (!dev || !eeh_subsystem_enabled)
return;
pr_debug("EEH: Adding device %s\n", pci_name(dev));
dn = pci_device_to_OF_node(dev);
- pdn = PCI_DN(dn);
- if (pdn->pcidev == dev) {
+ edev = pci_dev_to_eeh_dev(dev);
+ if (edev->pdev == dev) {
pr_debug("EEH: Already referenced !\n");
return;
}
- WARN_ON(pdn->pcidev);
+ WARN_ON(edev->pdev);
pci_dev_get(dev);
- pdn->pcidev = dev;
+ edev->pdev = dev;
+ dev->dev.archdata.edev = edev;
pci_addr_cache_insert_device(dev);
eeh_sysfs_add_device(dev);
*/
static void eeh_remove_device(struct pci_dev *dev)
{
- struct device_node *dn;
+ struct eeh_dev *edev;
+
if (!dev || !eeh_subsystem_enabled)
return;
+ edev = pci_dev_to_eeh_dev(dev);
/* Unregister the device with the EEH/PCI address search system */
pr_debug("EEH: Removing device %s\n", pci_name(dev));
- dn = pci_device_to_OF_node(dev);
- if (PCI_DN(dn)->pcidev == NULL) {
+ if (!edev || !edev->pdev) {
pr_debug("EEH: Not referenced !\n");
return;
}
- PCI_DN(dn)->pcidev = NULL;
+ edev->pdev = NULL;
+ dev->dev.archdata.edev = NULL;
pci_dev_put(dev);
pci_addr_cache_remove_device(dev);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff