This fixes various items pointed out during a review of the hwicap driver.
Primarily, reversed memcpy calls, re-entrancy issues, and mutex conversion
have been addressed. There are also fixes to comments to use the kerneldoc
format, as well as some sparse annotations.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
#define XHI_BUFFER_START 0
/**
- * buffer_icap_get_status: Get the contents of the status register.
- * @parameter base_address: is the base address of the device
+ * buffer_icap_get_status - Get the contents of the status register.
+ * @base_address: is the base address of the device
*
* The status register contains the ICAP status and the done bit.
*
}
/**
- * buffer_icap_get_bram: Reads data from the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset from which the data should be read.
+ * buffer_icap_get_bram - Reads data from the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset from which the data should be read.
*
* A bram is used as a configuration memory cache. One frame of data can
* be stored in this "storage buffer".
}
/**
- * buffer_icap_busy: Return true if the icap device is busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is busy
+ * @base_address: is the base address of the device
*
* The queries the low order bit of the status register, which
* indicates whether the current configuration or readback operation
}
/**
- * buffer_icap_busy: Return true if the icap device is not busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is not busy
+ * @base_address: is the base address of the device
*
* The queries the low order bit of the status register, which
* indicates whether the current configuration or readback operation
}
/**
- * buffer_icap_set_size: Set the size register.
- * @parameter base_address: is the base address of the device
- * @parameter data: The size in bytes.
+ * buffer_icap_set_size - Set the size register.
+ * @base_address: is the base address of the device
+ * @data: The size in bytes.
*
* The size register holds the number of 8 bit bytes to transfer between
* bram and the icap (or icap to bram).
}
/**
- * buffer_icap_mSetoffsetReg: Set the bram offset register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_offset - Set the bram offset register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
*
* The bram offset register holds the starting bram address to transfer
* data from during configuration or write data to during readback.
}
/**
- * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
*
* The RNC register determines the direction of the data transfer. It
* controls whether a configuration or readback take place. Writing to
}
/**
- * buffer_icap_set_bram: Write data to the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset at which the data should be written.
- * @parameter data: The value to be written to the bram offset.
+ * buffer_icap_set_bram - Write data to the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset at which the data should be written.
+ * @data: The value to be written to the bram offset.
*
* A bram is used as a configuration memory cache. One frame of data can
* be stored in this "storage buffer".
}
/**
- * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
* device (ICAP).
**/
static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
};
/**
- * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
* device (ICAP).
**/
static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
};
/**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
*
* Writing to the status register resets the ICAP logic in an internal
* version of the core. For the version of the core published in EDK,
}
/**
- * buffer_icap_set_configuration: Load a partial bitstream from system memory.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Kernel address of the partial bitstream.
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_set_configuration - Load a partial bitstream from system memory.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Kernel address of the partial bitstream.
+ * @size: the size of the partial bitstream in 32 bit words.
**/
int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 size)
};
/**
- * buffer_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
**/
int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 size)
/**
- * fifo_icap_fifo_write: Write data to the write FIFO.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the 32-bit value to be written to the FIFO.
+ * fifo_icap_fifo_write - Write data to the write FIFO.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the 32-bit value to be written to the FIFO.
*
* This function will silently fail if the fifo is full.
**/
}
/**
- * fifo_icap_fifo_read: Read data from the Read FIFO.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_fifo_read - Read data from the Read FIFO.
+ * @drvdata: a pointer to the drvdata.
*
* This function will silently fail if the fifo is empty.
**/
}
/**
- * fifo_icap_set_read_size: Set the the size register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the size of the following read transaction, in words.
+ * fifo_icap_set_read_size - Set the the size register.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the size of the following read transaction, in words.
**/
static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
u32 data)
}
/**
- * fifo_icap_start_config: Initiate a configuration (write) to the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_config - Initiate a configuration (write) to the device.
+ * @drvdata: a pointer to the drvdata.
**/
static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
{
}
/**
- * fifo_icap_start_readback: Initiate a readback from the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_readback - Initiate a readback from the device.
+ * @drvdata: a pointer to the drvdata.
**/
static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
{
}
/**
- * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
+ * @drvdata: a pointer to the drvdata.
**/
static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
{
}
/**
- * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_write_fifo_vacancy - Query the write fifo available space.
+ * @drvdata: a pointer to the drvdata.
*
* Return the number of words that can be safely pushed into the write fifo.
**/
}
/**
- * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_read_fifo_occupancy - Query the read fifo available data.
+ * @drvdata: a pointer to the drvdata.
*
* Return the number of words that can be safely read from the read fifo.
**/
}
/**
- * fifo_icap_set_configuration: Send configuration data to the ICAP.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter frame_buffer: a pointer to the data to be written to the
+ * fifo_icap_set_configuration - Send configuration data to the ICAP.
+ * @drvdata: a pointer to the drvdata.
+ * @frame_buffer: a pointer to the data to be written to the
* ICAP device.
- * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ * @num_words: the number of words (32 bit) to write to the ICAP
* device.
* This function writes the given user data to the Write FIFO in
}
/**
- * fifo_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * fifo_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
*
* This function reads the specified number of words from the ICAP device in
* the polled mode.
}
/**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
*
* This function forces the software reset of the complete HWICAP device.
* All the registers will return to the default value and the FIFO is also
}
/**
- * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_flush_fifo - This function flushes the FIFOs in the device.
+ * @drvdata: a pointer to the drvdata.
*/
void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
{
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <linux/sysctl.h>
#include <linux/version.h>
#include <linux/fs.h>
/* An array, which is set to true when the device is registered. */
static bool probed_devices[HWICAP_DEVICES];
+static struct mutex icap_sem;
static struct class *icap_class;
};
/**
- * hwicap_command_desync: Send a DESYNC command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
+ * hwicap_command_desync - Send a DESYNC command to the ICAP port.
+ * @drvdata: a pointer to the drvdata.
*
* This command desynchronizes the ICAP After this command, a
* bitstream containing a NULL packet, followed by a SYNCH packet is
* required before the ICAP will recognize commands.
*/
-int hwicap_command_desync(struct hwicap_drvdata *drvdata)
+static int hwicap_command_desync(struct hwicap_drvdata *drvdata)
{
u32 buffer[4];
u32 index = 0;
}
/**
- * hwicap_command_capture: Send a CAPTURE command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
- *
- * This command captures all of the flip flop states so they will be
- * available during readback. One can use this command instead of
- * enabling the CAPTURE block in the design.
- */
-int hwicap_command_capture(struct hwicap_drvdata *drvdata)
-{
- u32 buffer[7];
- u32 index = 0;
-
- /*
- * Create the data to be written to the ICAP.
- */
- buffer[index++] = XHI_DUMMY_PACKET;
- buffer[index++] = XHI_SYNC_PACKET;
- buffer[index++] = XHI_NOOP_PACKET;
- buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
- buffer[index++] = XHI_CMD_GCAPTURE;
- buffer[index++] = XHI_DUMMY_PACKET;
- buffer[index++] = XHI_DUMMY_PACKET;
-
- /*
- * Write the data to the FIFO and intiate the transfer of data
- * present in the FIFO to the ICAP device.
- */
- return drvdata->config->set_configuration(drvdata,
- &buffer[0], index);
-
-}
-
-/**
- * hwicap_get_configuration_register: Query a configuration register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter reg: a constant which represents the configuration
+ * hwicap_get_configuration_register - Query a configuration register.
+ * @drvdata: a pointer to the drvdata.
+ * @reg: a constant which represents the configuration
* register value to be returned.
* Examples: XHI_IDCODE, XHI_FLR.
- * @parameter RegData: returns the value of the register.
+ * @reg_data: returns the value of the register.
*
* Sends a query packet to the ICAP and then receives the response.
* The icap is left in Synched state.
*/
-int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
- u32 reg, u32 *RegData)
+static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
+ u32 reg, u32 *reg_data)
{
int status;
u32 buffer[6];
/*
* Read the configuration register
*/
- status = drvdata->config->get_configuration(drvdata, RegData, 1);
+ status = drvdata->config->get_configuration(drvdata, reg_data, 1);
if (status)
return status;
return 0;
}
-int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
+static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
{
int status;
u32 idcode;
}
static ssize_t
-hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
struct hwicap_drvdata *drvdata = file->private_data;
ssize_t bytes_to_read = 0;
u32 bytes_remaining;
int status;
- if (down_interruptible(&drvdata->sem))
- return -ERESTARTSYS;
+ status = mutex_lock_interruptible(&drvdata->sem);
+ if (status)
+ return status;
if (drvdata->read_buffer_in_use) {
/* If there are leftover bytes in the buffer, just */
goto error;
}
drvdata->read_buffer_in_use -= bytes_to_read;
- memcpy(drvdata->read_buffer + bytes_to_read,
- drvdata->read_buffer, 4 - bytes_to_read);
+ memmove(drvdata->read_buffer,
+ drvdata->read_buffer + bytes_to_read,
+ 4 - bytes_to_read);
} else {
/* Get new data from the ICAP, and return was was requested. */
kbuf = (u32 *) get_zeroed_page(GFP_KERNEL);
status = -EFAULT;
goto error;
}
- memcpy(kbuf, drvdata->read_buffer, bytes_remaining);
+ memcpy(drvdata->read_buffer,
+ kbuf,
+ bytes_remaining);
drvdata->read_buffer_in_use = bytes_remaining;
free_page((unsigned long)kbuf);
}
status = bytes_to_read;
error:
- up(&drvdata->sem);
+ mutex_unlock(&drvdata->sem);
return status;
}
static ssize_t
-hwicap_write(struct file *file, const char *buf,
+hwicap_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct hwicap_drvdata *drvdata = file->private_data;
ssize_t len;
ssize_t status;
- if (down_interruptible(&drvdata->sem))
- return -ERESTARTSYS;
+ status = mutex_lock_interruptible(&drvdata->sem);
+ if (status)
+ return status;
left += drvdata->write_buffer_in_use;
memcpy(kbuf, drvdata->write_buffer,
drvdata->write_buffer_in_use);
if (copy_from_user(
- (((char *)kbuf) + (drvdata->write_buffer_in_use)),
+ (((char *)kbuf) + drvdata->write_buffer_in_use),
buf + written,
len - (drvdata->write_buffer_in_use))) {
free_page((unsigned long)kbuf);
free_page((unsigned long)kbuf);
status = written;
error:
- up(&drvdata->sem);
+ mutex_unlock(&drvdata->sem);
return status;
}
drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev);
- if (down_interruptible(&drvdata->sem))
- return -ERESTARTSYS;
+ status = mutex_lock_interruptible(&drvdata->sem);
+ if (status)
+ return status;
if (drvdata->is_open) {
status = -EBUSY;
drvdata->is_open = 1;
error:
- up(&drvdata->sem);
+ mutex_unlock(&drvdata->sem);
return status;
}
int i;
int status = 0;
- if (down_interruptible(&drvdata->sem))
- return -ERESTARTSYS;
+ mutex_lock(&drvdata->sem);
if (drvdata->write_buffer_in_use) {
/* Flush write buffer. */
error:
drvdata->is_open = 0;
- up(&drvdata->sem);
+ mutex_unlock(&drvdata->sem);
return status;
}
dev_info(dev, "Xilinx icap port driver\n");
+ mutex_lock(&icap_sem);
+
if (id < 0) {
for (id = 0; id < HWICAP_DEVICES; id++)
if (!probed_devices[id])
break;
}
if (id < 0 || id >= HWICAP_DEVICES) {
+ mutex_unlock(&icap_sem);
dev_err(dev, "%s%i too large\n", DRIVER_NAME, id);
return -EINVAL;
}
if (probed_devices[id]) {
+ mutex_unlock(&icap_sem);
dev_err(dev, "cannot assign to %s%i; it is already in use\n",
DRIVER_NAME, id);
return -EBUSY;
}
probed_devices[id] = 1;
+ mutex_unlock(&icap_sem);
devt = MKDEV(xhwicap_major, xhwicap_minor + id);
- drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+ drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(dev, "Couldn't allocate device private record\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto failed0;
}
- memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata));
dev_set_drvdata(dev, (void *)drvdata);
if (!regs_res) {
drvdata->config = config;
drvdata->config_regs = config_regs;
- init_MUTEX(&drvdata->sem);
+ mutex_init(&drvdata->sem);
drvdata->is_open = 0;
dev_info(dev, "ioremap %lx to %p with size %x\n",
goto failed3;
}
/* devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
- class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME);
+ device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id);
return 0; /* success */
failed3:
failed1:
kfree(drvdata);
+ failed0:
+ mutex_lock(&icap_sem);
+ probed_devices[id] = 0;
+ mutex_unlock(&icap_sem);
+
return retval;
}
if (!drvdata)
return 0;
- class_device_destroy(icap_class, drvdata->devt);
+ device_destroy(icap_class, drvdata->devt);
cdev_del(&drvdata->cdev);
iounmap(drvdata->base_address);
release_mem_region(drvdata->mem_start, drvdata->mem_size);
kfree(drvdata);
dev_set_drvdata(dev, NULL);
- probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+ mutex_lock(&icap_sem);
+ probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+ mutex_unlock(&icap_sem);
return 0; /* success */
}
};
/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __devinit hwicap_of_register(void)
+static inline int __init hwicap_of_register(void)
{
pr_debug("hwicap: calling of_register_platform_driver()\n");
return of_register_platform_driver(&hwicap_of_driver);
}
-static inline void __devexit hwicap_of_unregister(void)
+static inline void __exit hwicap_of_unregister(void)
{
of_unregister_platform_driver(&hwicap_of_driver);
}
#else /* CONFIG_OF */
/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __devinit hwicap_of_register(void) { return 0; }
-static inline void __devexit hwicap_of_unregister(void) { }
+static inline int __init hwicap_of_register(void) { return 0; }
+static inline void __exit hwicap_of_unregister(void) { }
#endif /* CONFIG_OF */
-static int __devinit hwicap_module_init(void)
+static int __init hwicap_module_init(void)
{
dev_t devt;
int retval;
icap_class = class_create(THIS_MODULE, "xilinx_config");
+ mutex_init(&icap_sem);
if (xhwicap_major) {
devt = MKDEV(xhwicap_major, xhwicap_minor);
return retval;
}
-static void __devexit hwicap_module_cleanup(void)
+static void __exit hwicap_module_cleanup(void)
{
dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
u8 write_buffer[4];
u32 read_buffer_in_use; /* Always in [0,3] */
u8 read_buffer[4];
- u32 mem_start; /* phys. address of the control registers */
- u32 mem_end; /* phys. address of the control registers */
- u32 mem_size;
+ resource_size_t mem_start;/* phys. address of the control registers */
+ resource_size_t mem_end; /* phys. address of the control registers */
+ resource_size_t mem_size;
void __iomem *base_address;/* virt. address of the control registers */
struct device *dev;
const struct config_registers *config_regs;
void *private_data;
bool is_open;
- struct semaphore sem;
+ struct mutex sem;
};
struct hwicap_driver_config {
#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL
/**
- * hwicap_type_1_read: Generates a Type 1 read packet header.
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
*
* Generates a Type 1 read packet header, which is used to indirectly
* read registers in the configuration logic. This packet must then
* be sent through the icap device, and a return packet received with
* the information.
**/
-static inline u32 hwicap_type_1_read(u32 Register)
+static inline u32 hwicap_type_1_read(u32 reg)
{
return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
- (Register << XHI_REGISTER_SHIFT) |
+ (reg << XHI_REGISTER_SHIFT) |
(XHI_OP_READ << XHI_OP_SHIFT);
}
/**
- * hwicap_type_1_write: Generates a Type 1 write packet header
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
**/
-static inline u32 hwicap_type_1_write(u32 Register)
+static inline u32 hwicap_type_1_write(u32 reg)
{
return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
- (Register << XHI_REGISTER_SHIFT) |
+ (reg << XHI_REGISTER_SHIFT) |
(XHI_OP_WRITE << XHI_OP_SHIFT);
}
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff