struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
enum data_queue_qid qid = skb_get_queue_mapping(skb);
+ struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct data_queue *queue;
u16 frame_control;
}
}
+ /*
+ * XXX: This is as wrong as the old mac80211 code was,
+ * due to beacons not getting sequence numbers assigned
+ * properly.
+ */
+ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ intf->seqno += 0x10;
+ ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+ }
+
if (rt2x00queue_write_tx_frame(queue, skb)) {
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_BUSY;
* is for the whole aggregation.
* @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
* so consider using block ack request (BAR).
+ * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+ * number to this frame, taking care of not overwriting the fragment
+ * number and increasing the sequence number only when the
+ * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly
+ * assign sequence numbers to QoS-data frames but cannot do so correctly
+ * for non-QoS-data and management frames because beacons need them from
+ * that counter as well and mac80211 cannot guarantee proper sequencing.
+ * If this flag is set, the driver should instruct the hardware to
+ * assign a sequence number to the frame or assign one itself. Cf. IEEE
+ * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
+ * beacons always be clear for frames without a sequence number field.
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
IEEE80211_TX_STAT_ACK = BIT(21),
IEEE80211_TX_STAT_AMPDU = BIT(22),
IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23),
+ IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24),
};
/* misc utils */
-static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_hdr *hdr)
-{
- /* Set the sequence number for this frame. */
- hdr->seq_ctrl = cpu_to_le16(sdata->sequence);
-
- /* Increase the sequence number. */
- sdata->sequence = (sdata->sequence + 0x10) & IEEE80211_SCTL_SEQ;
-}
-
#ifdef CONFIG_MAC80211_LOWTX_FRAME_DUMP
static void ieee80211_dump_frame(const char *ifname, const char *title,
const struct sk_buff *skb)
return TX_CONTINUE;
}
-static ieee80211_tx_result debug_noinline
-ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
-
- if (ieee80211_hdrlen(hdr->frame_control) >= 24)
- ieee80211_include_sequence(tx->sdata, hdr);
-
- return TX_CONTINUE;
-}
-
/* This function is called whenever the AP is about to exceed the maximum limit
* of buffered frames for power saving STAs. This situation should not really
* happen often during normal operation, so dropping the oldest buffered packet
return TX_CONTINUE;
}
+static ieee80211_tx_result debug_noinline
+ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
+ u16 *seq;
+ u8 *qc;
+ int tid;
+
+ /* only for injected frames */
+ if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
+ return TX_CONTINUE;
+
+ if (ieee80211_hdrlen(hdr->frame_control) < 24)
+ return TX_CONTINUE;
+
+ if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
+ return TX_CONTINUE;
+ }
+
+ /*
+ * This should be true for injected/management frames only, for
+ * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ
+ * above since they are not QoS-data frames.
+ */
+ if (!tx->sta)
+ return TX_CONTINUE;
+
+ /* include per-STA, per-TID sequence counter */
+
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
+ seq = &tx->sta->tid_seq[tid];
+
+ hdr->seq_ctrl = cpu_to_le16(*seq);
+
+ /* Increase the sequence number. */
+ *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
+
+ return TX_CONTINUE;
+}
+
static ieee80211_tx_result debug_noinline
ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
{
goto txh_done;
CALL_TXH(ieee80211_tx_h_check_assoc)
- CALL_TXH(ieee80211_tx_h_sequence)
CALL_TXH(ieee80211_tx_h_ps_buf)
CALL_TXH(ieee80211_tx_h_select_key)
CALL_TXH(ieee80211_tx_h_michael_mic_add)
CALL_TXH(ieee80211_tx_h_rate_ctrl)
CALL_TXH(ieee80211_tx_h_misc)
+ CALL_TXH(ieee80211_tx_h_sequence)
CALL_TXH(ieee80211_tx_h_fragment)
/* handlers after fragment must be aware of tx info fragmentation! */
CALL_TXH(ieee80211_tx_h_encrypt)
memcpy(skb_put(skb, beacon->head_len), beacon->head,
beacon->head_len);
- ieee80211_include_sequence(sdata,
- (struct ieee80211_hdr *)skb->data);
-
/*
* Not very nice, but we want to allow the driver to call
* ieee80211_beacon_get() as a response to the set_tim()
info->control.vif = vif;
info->tx_rate_idx = rsel.rate_idx;
+
+ info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
if (sdata->bss_conf.use_short_preamble &&
sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
+
info->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
- info->flags |= IEEE80211_TX_CTL_NO_ACK;
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
info->control.retry_limit = 1;
- info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+
(*num_beacons)++;
out:
rcu_read_unlock();
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff