ASoC: mxs-saif: Fix channel swap for 24-bit format
authorFabio Estevam <fabio.estevam@freescale.com>
Thu, 1 Nov 2012 17:57:11 +0000 (15:57 -0200)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Fri, 2 Nov 2012 15:03:06 +0000 (15:03 +0000)
Playing 24-bit format file leads to channel swap on mx28 and the reason is that
the current driver performs one write/read to/from the SAIF_DATA register to
trigger the transfer.

This approach works fine for S16_LE case because SAIF_DATA is a 32-bit register
and thus is capable of storing the 16-bit left and right channels, but for the
S24_LE case it can only store one channel, so in order to not lose the FIFO sync
an extra read/write is needed.

Reported-by: Dan Winner <DWinner@tc-helicon.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Dan Winner <DWinner@tc-helicon.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
sound/soc/mxs/mxs-saif.c

index 93380cc7cf9748f2ba05eb4ee1bb554bde695d68..c294fbb523fce2dac76a70d9e5537a47fee40042 100644 (file)
@@ -523,16 +523,24 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
 
                if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
                        /*
-                        * write a data to saif data register to trigger
-                        * the transfer
+                        * write data to saif data register to trigger
+                        * the transfer.
+                        * For 24-bit format the 32-bit FIFO register stores
+                        * only one channel, so we need to write twice.
+                        * This is also safe for the other non 24-bit formats.
                         */
                        __raw_writel(0, saif->base + SAIF_DATA);
+                       __raw_writel(0, saif->base + SAIF_DATA);
                } else {
                        /*
-                        * read a data from saif data register to trigger
-                        * the receive
+                        * read data from saif data register to trigger
+                        * the receive.
+                        * For 24-bit format the 32-bit FIFO register stores
+                        * only one channel, so we need to read twice.
+                        * This is also safe for the other non 24-bit formats.
                         */
                        __raw_readl(saif->base + SAIF_DATA);
+                       __raw_readl(saif->base + SAIF_DATA);
                }
 
                master_saif->ongoing = 1;