--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
+ *
+ * Copyright 2003-2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <net/ax88796.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/audio-simtec.h>
+
+#include "simtec.h"
+#include "common.h"
+
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+ /* ISA IO areas */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ },
+
+ /* we could possibly compress the next set down into a set of smaller tables
+ * pagetables, but that would mean using an L2 section, and it still means
+ * we cannot actually feed the same register to an LDR due to 16K spacing
+ */
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)ANUBIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)ANUBIS_VA_IDREG,
+ .pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(ANUBIS_VA_CTRL1);
+ tmp &= ~ANUBIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(anubis_nand_sets),
+ .sets = anubis_nand_sets,
+ .select_chip = anubis_nand_select,
+};
+
+/* IDE channels */
+
+static struct pata_platform_info anubis_ide_platdata = {
+ .ioport_shift = 5,
+};
+
+static struct resource anubis_ide0_resource[] = {
+ {
+ .start = S3C2410_CS3,
+ .end = S3C2410_CS3 + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = S3C2410_CS3 + (1<<26) + (6*32),
+ .end = S3C2410_CS3 + (1<<26) + (7*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device anubis_device_ide0 = {
+ .name = "pata_platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_ide0_resource),
+ .resource = anubis_ide0_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+static struct resource anubis_ide1_resource[] = {
+ {
+ .start = S3C2410_CS4,
+ .end = S3C2410_CS4 + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = S3C2410_CS4 + (1<<26) + (6*32),
+ .end = S3C2410_CS4 + (1<<26) + (7*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device anubis_device_ide1 = {
+ .name = "pata_platform",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(anubis_ide1_resource),
+ .resource = anubis_ide1_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5,
+ .end = S3C2410_CS5 + (0x20 * 0x20) -1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = IRQ_ASIX,
+ .end = IRQ_ASIX,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device anubis_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_asix_resource),
+ .resource = anubis_asix_resource,
+ .dev = {
+ .platform_data = &anubis_asix_platdata,
+ }
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+ [0] = {
+ .start = S3C2410_CS2,
+ .end = S3C2410_CS2 + SZ_8M,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C2410_CS2 + SZ_64M - SZ_2M,
+ .end = S3C2410_CS2 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT0,
+ .end = IRQ_EINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ .devices = SM501_USE_GPIO,
+
+ /* set the SDRAM and bus clocks */
+ .mclk = 72 * MHZ,
+ .m1xclk = 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+ [0] = {
+ .bus_num = 1,
+ .pin_scl = 44,
+ .pin_sda = 45,
+ },
+ [1] = {
+ .bus_num = 2,
+ .pin_scl = 40,
+ .pin_sda = 41,
+ },
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+ .init = &anubis_sm501_initdata,
+ .gpio_base = -1,
+ .gpio_i2c = anubis_sm501_gpio_i2c,
+ .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_sm501_resource),
+ .resource = anubis_sm501_resource,
+ .dev = {
+ .platform_data = &anubis_sm501_platdata,
+ },
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &anubis_device_ide0,
+ &anubis_device_ide1,
+ &anubis_device_asix,
+ &anubis_device_sm501,
+};
+
+static struct clk *anubis_clocks[] __initdata = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ }
+};
+
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+ .have_mic = 1,
+ .have_lout = 1,
+ .output_cdclk = 1,
+ .use_mpllin = 1,
+ .amp_gpio = S3C2410_GPB(2),
+ .amp_gain[0] = S3C2410_GPD(10),
+ .amp_gain[1] = S3C2410_GPD(11),
+};
+
+static void __init anubis_map_io(void)
+{
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = &clk_upll;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = &clk_upll;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
+
+ s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+ printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+ __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+ anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+ anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+ } else {
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ }
+}
+
+static void __init anubis_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&anubis_nand_info);
+ simtec_audio_add(NULL, false, &anubis_audio);
+
+ platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+ i2c_register_board_info(0, anubis_i2c_devs,
+ ARRAY_SIZE(anubis_i2c_devs));
+}
+
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = anubis_map_io,
+ .init_machine = anubis_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ * and modifications by SBZ <sbz@spgui.org> and
+ * Weibing <http://weibing.blogbus.com>
+ *
+ * For product information, visit http://www.arm.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/mci.h>
+
+#include "common.h"
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+ /* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_2M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "Root",
+ .offset = SZ_256K + SZ_2M,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
+ .partitions = at2440evb_default_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
+ .sets = at2440evb_nand_sets,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+ [0] = {
+ .start = S3C2410_CS3,
+ .end = S3C2410_CS3 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C2410_CS3 + 4,
+ .end = S3C2410_CS3 + 7,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_EINT7,
+ .end = IRQ_EINT7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
+ .resource = at2440evb_dm9k_resource,
+ .dev = {
+ .platform_data = &at2440evb_dm9k_pdata,
+ },
+};
+
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
+ .gpio_detect = S3C2410_GPG(10),
+};
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 800,
+ .height = 480,
+
+ .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
+ .xres = 800,
+ .yres = 480,
+ .bpp = 16,
+ .left_margin = 88,
+ .right_margin = 40,
+ .hsync_len = 128,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .vsync_len = 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+ .displays = &at2440evb_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_lcd,
+ &at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+ s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+ s3c24xx_init_clocks(16934400);
+ s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+}
+
+static void __init at2440evb_init(void)
+{
+ s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
+ s3c_nand_set_platdata(&at2440evb_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+ .atag_offset = 0x100,
+ .map_io = at2440evb_map_io,
+ .init_machine = at2440evb_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
+ *
+ * Copyright (C) 2006-2009 by Openmoko, Inc.
+ * Authors: Harald Welte <laforge@openmoko.org>
+ * Andy Green <andy@openmoko.org>
+ * Werner Almesberger <werner@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+
+#include <plat/usb-control.h>
+#include <mach/regs-mem.h>
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/ts.h>
+
+#include "common.h"
+
+static struct pcf50633 *gta02_pcf;
+
+/*
+ * This gets called frequently when we paniced.
+ */
+
+static long gta02_panic_blink(int state)
+{
+ long delay = 0;
+ char led;
+
+ led = (state) ? 1 : 0;
+ gpio_direction_output(GTA02_GPIO_AUX_LED, led);
+
+ return delay;
+}
+
+
+static struct map_desc gta02_iodesc[] __initdata = {
+ {
+ .virtual = 0xe0000000,
+ .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+/*
+ * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+ * We use this to recognize that we can pull 1A from the USB socket.
+ *
+ * These constants are the measured pcf50633 ADC levels with the 1A
+ * charger / 48K resistor, and with no pulldown resistor.
+ */
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+ int ma;
+
+ /* Interpret charger type */
+ if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+ /*
+ * Sanity - stop GPO driving out now that we have a 1A charger
+ * GPO controls USB Host power generation on GTA02
+ */
+ pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+ ma = 1000;
+ } else
+ ma = 100;
+
+ pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+ if (gta02_usb_vbus_draw) {
+ pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
+ return;
+ }
+
+#ifdef CONFIG_PCF50633_ADC
+ pcf50633_adc_async_read(gta02_pcf,
+ PCF50633_ADCC1_MUX_ADCIN1,
+ PCF50633_ADCC1_AVERAGE_16,
+ gta02_configure_pmu_for_charger,
+ NULL);
+#else
+ /*
+ * If the PCF50633 ADC is disabled we fallback to a
+ * 100mA limit for safety.
+ */
+ pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+ if (irq == PCF50633_IRQ_USBINS) {
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+
+ return;
+ }
+
+ if (irq == PCF50633_IRQ_USBREM) {
+ cancel_delayed_work_sync(>a02_charger_work);
+ gta02_usb_vbus_draw = 0;
+ }
+}
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+ if (!gta02_pcf)
+ return;
+
+ gta02_usb_vbus_draw = ma;
+
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+#else /* !CONFIG_CHARGER_PCF50633 */
+#define gta02_pmu_event_callback NULL
+#define gta02_udc_vbus_draw NULL
+#endif
+
+/*
+ * This is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device. Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent. This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+
+
+static char *gta02_batteries[] = {
+ "battery",
+};
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 5,
+};
+
+static struct pcf50633_platform_data gta02_pcf_pdata = {
+ .resumers = {
+ [0] = PCF50633_INT1_USBINS |
+ PCF50633_INT1_USBREM |
+ PCF50633_INT1_ALARM,
+ [1] = PCF50633_INT2_ONKEYF,
+ [2] = PCF50633_INT3_ONKEY1S,
+ [3] = PCF50633_INT4_LOWSYS |
+ PCF50633_INT4_LOWBAT |
+ PCF50633_INT4_HIGHTMP,
+ },
+
+ .batteries = gta02_batteries,
+ .num_batteries = ARRAY_SIZE(gta02_batteries),
+
+ .charger_reference_current_ma = 1000,
+
+ .backlight_data = >a02_backlight_data,
+
+ .reg_init_data = {
+ [PCF50633_REGULATOR_AUTO] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_DOWN1] = {
+ .constraints = {
+ .min_uV = 1300000,
+ .max_uV = 1600000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_DOWN2] = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+ },
+ [PCF50633_REGULATOR_HCLDO] = {
+ .constraints = {
+ .min_uV = 2000000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [PCF50633_REGULATOR_LDO1] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO2] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO3] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO4] = {
+ .constraints = {
+ .min_uV = 3200000,
+ .max_uV = 3200000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO5] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO6] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ },
+ [PCF50633_REGULATOR_MEMLDO] = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ },
+
+ },
+ .probe_done = gta02_pmu_attach_child_devices,
+ .mbc_event_callback = gta02_pmu_event_callback,
+};
+
+
+/* NOR Flash. */
+
+#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
+#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+ .start = GTA02_FLASH_BASE,
+ .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = >a02_nor_flash_data,
+ },
+ .resource = >a02_nor_flash_resource,
+ .num_resources = 1,
+};
+
+
+static struct platform_device s3c24xx_pwm_device = {
+ .name = "s3c24xx_pwm",
+ .num_resources = 0,
+};
+
+static struct platform_device gta02_dfbmcs320_device = {
+ .name = "dfbmcs320",
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf50633", 0x73),
+ .irq = GTA02_IRQ_PCF50633,
+ .platform_data = >a02_pcf_pdata,
+ },
+ {
+ I2C_BOARD_INFO("wm8753", 0x1a),
+ },
+};
+
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
+ [0] = {
+ /*
+ * This name is also hard-coded in the boot loaders, so
+ * changing it would would require all users to upgrade
+ * their boot loaders, some of which are stored in a NOR
+ * that is considered to be immutable.
+ */
+ .name = "neo1973-nand",
+ .nr_chips = 1,
+ .flash_bbt = 1,
+ },
+};
+
+/*
+ * Choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory).
+ */
+
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(gta02_nand_sets),
+ .sets = gta02_nand_sets,
+};
+
+
+/* Get PMU to set USB current limit accordingly. */
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
+ .vbus_draw = gta02_udc_vbus_draw,
+ .pullup_pin = GTA02_GPIO_USB_PULLUP,
+};
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED,
+ },
+ .port[1] = {
+ .flags = 0,
+ },
+};
+
+/* Touchscreen */
+static struct s3c2410_ts_mach_info gta02_ts_info = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .oversampling_shift = 2,
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = >a02_buttons_pdata,
+ },
+};
+
+static void __init gta02_map_io(void)
+{
+ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+
+/* These are the guys that don't need to be children of PMU. */
+
+static struct platform_device *gta02_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &s3c_device_nand,
+ >a02_nor_flash,
+ &s3c24xx_pwm_device,
+ &s3c_device_iis,
+ &samsung_asoc_dma,
+ &s3c_device_i2c0,
+ >a02_dfbmcs320_device,
+ >a02_buttons_device,
+ &s3c_device_adc,
+ &s3c_device_ts,
+};
+
+/* These guys DO need to be children of PMU. */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+};
+
+
+/*
+ * This is called when pc50633 is probed, quite late in the day since it is an
+ * I2C bus device. Here we can define platform devices with the advantage that
+ * we can mark the pcf50633 as the parent. This makes them get suspended and
+ * resumed with their parent the pcf50633 still around. All devices whose
+ * operation depends on something from pcf50633 must have this relationship
+ * made explicit like this, or suspend and resume will become an unreliable
+ * hellworld.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+ int n;
+
+ /* Grab a copy of the now probed PMU pointer. */
+ gta02_pcf = pcf;
+
+ for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+ gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+ platform_add_devices(gta02_devices_pmu_children,
+ ARRAY_SIZE(gta02_devices_pmu_children));
+}
+
+static void gta02_poweroff(void)
+{
+ pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+}
+
+static void __init gta02_machine_init(void)
+{
+ /* Set the panic callback to turn AUX LED on or off. */
+ panic_blink = gta02_panic_blink;
+
+ s3c_pm_init();
+
+#ifdef CONFIG_CHARGER_PCF50633
+ INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
+#endif
+
+ s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c24xx_ts_set_platdata(>a02_ts_info);
+ s3c_ohci_set_platdata(>a02_usb_info);
+ s3c_nand_set_platdata(>a02_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+
+ platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+ pm_power_off = gta02_poweroff;
+
+ regulator_has_full_constraints();
+}
+
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+ /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
+ .atag_offset = 0x100,
+ .map_io = gta02_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = gta02_machine_init,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ * and modifications by SBZ <sbz@spgui.org> and
+ * Weibing <http://weibing.blogbus.com> and
+ * Michel Pollet <buserror@gmail.com>
+ *
+ * For product information, visit http://code.google.com/p/mini2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/i2c/at24.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/irqs.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <sound/s3c24xx_uda134x.h>
+
+#include "common.h"
+
+#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
+
+static struct map_desc mini2440_iodesc[] __initdata = {
+ /* nothing to declare, move along */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+
+static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* USB device UDC support */
+
+static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPC(5),
+};
+
+
+/* LCD timing and setup */
+
+/*
+ * This macro simplifies the table bellow
+ */
+#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
+ _yres,margin_top,margin_bottom,vsync, refresh) \
+ .width = _xres, \
+ .xres = _xres, \
+ .height = _yres, \
+ .yres = _yres, \
+ .left_margin = margin_left, \
+ .right_margin = margin_right, \
+ .upper_margin = margin_top, \
+ .lower_margin = margin_bottom, \
+ .hsync_len = hsync, \
+ .vsync_len = vsync, \
+ .pixclock = ((_clock*100000000000LL) / \
+ ((refresh) * \
+ (hsync + margin_left + _xres + margin_right) * \
+ (vsync + margin_top + _yres + margin_bottom))), \
+ .bpp = 16,\
+ .type = (S3C2410_LCDCON1_TFT16BPP |\
+ S3C2410_LCDCON1_TFT)
+
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+ [0] = { /* mini2440 + 3.5" TFT + touchscreen */
+ _LCD_DECLARE(
+ 7, /* The 3.5 is quite fast */
+ 240, 21, 38, 6, /* x timing */
+ 320, 4, 4, 2, /* y timing */
+ 60), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+ [1] = { /* mini2440 + 7" TFT + touchscreen */
+ _LCD_DECLARE(
+ 10, /* the 7" runs slower */
+ 800, 40, 40, 48, /* x timing */
+ 480, 29, 3, 3, /* y timing */
+ 50), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN),
+ },
+ /* The VGA shield can outout at several resolutions. All share
+ * the same timings, however, anything smaller than 1024x768
+ * will only be displayed in the top left corner of a 1024x768
+ * XGA output unless you add optional dip switches to the shield.
+ * Therefore timings for other resolutions have been omitted here.
+ */
+ [2] = {
+ _LCD_DECLARE(
+ 10,
+ 1024, 1, 2, 2, /* y timing */
+ 768, 200, 16, 16, /* x timing */
+ 24), /* refresh rate, maximum stable,
+ tested with the FPGA shield */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP),
+ },
+ /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
+ [3] = {
+ _LCD_DECLARE(
+ /* clock */
+ 7,
+ /* xres, margin_right, margin_left, hsync */
+ 320, 68, 66, 4,
+ /* yres, margin_top, margin_bottom, vsync */
+ 240, 4, 4, 9,
+ /* refresh rate */
+ 60),
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_HWSWP),
+ },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+ .displays = &mini2440_lcd_cfg[0], /* not constant! see init */
+ .num_displays = 1,
+ .default_display = 0,
+
+ /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+ * and disable the pull down resistors on pins we are using for LCD
+ * data. */
+
+ .gpcup = (0xf << 1) | (0x3f << 10),
+
+ .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
+ S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+ S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
+ S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
+ S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
+
+ .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
+ S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
+ S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+ S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+ S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+ .gpdup = (0x3f << 2) | (0x3f << 10),
+
+ .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
+ S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
+ S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
+ S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+ S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+ S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+ .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
+ S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
+ S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
+ S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+ S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+ S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* MMC/SD */
+
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+/* NAND Flash on MINI2440 board */
+
+static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+ [0] = {
+ .name = "u-boot",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "u-boot-env",
+ .size = SZ_128K,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "kernel",
+ /* 5 megabytes, for a kernel with no modules
+ * or a uImage with a ramdisk attached */
+ .size = 0x00500000,
+ .offset = SZ_256K + SZ_128K,
+ },
+ [3] = {
+ .name = "root",
+ .offset = SZ_256K + SZ_128K + 0x00500000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
+ .partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
+ },
+};
+
+static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(mini2440_nand_sets),
+ .sets = mini2440_nand_sets,
+ .ignore_unset_ecc = 1,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini2440_dm9k_resource[] = {
+ [0] = {
+ .start = MACH_MINI2440_DM9K_BASE,
+ .end = MACH_MINI2440_DM9K_BASE + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MACH_MINI2440_DM9K_BASE + 4,
+ .end = MACH_MINI2440_DM9K_BASE + 7,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_EINT7,
+ .end = IRQ_EINT7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+/*
+ * The DM9000 has no eeprom, and it's MAC address is set by
+ * the bootloader before starting the kernel.
+ */
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini2440_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
+ .resource = mini2440_dm9k_resource,
+ .dev = {
+ .platform_data = &mini2440_dm9k_pdata,
+ },
+};
+
+/* CON5
+ * +--+ /-----\
+ * | | | |
+ * | | | BAT |
+ * | | \_____/
+ * | |
+ * | | +----+ +----+
+ * | | | K5 | | K1 |
+ * | | +----+ +----+
+ * | | +----+ +----+
+ * | | | K4 | | K2 |
+ * | | +----+ +----+
+ * | | +----+ +----+
+ * | | | K6 | | K3 |
+ * | | +----+ +----+
+ * .....
+ */
+static struct gpio_keys_button mini2440_buttons[] = {
+ {
+ .gpio = S3C2410_GPG(0), /* K1 */
+ .code = KEY_F1,
+ .desc = "Button 1",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(3), /* K2 */
+ .code = KEY_F2,
+ .desc = "Button 2",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(5), /* K3 */
+ .code = KEY_F3,
+ .desc = "Button 3",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(6), /* K4 */
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(7), /* K5 */
+ .code = KEY_F5,
+ .desc = "Button 5",
+ .active_low = 1,
+ },
+#if 0
+ /* this pin is also known as TCLK1 and seems to already
+ * marked as "in use" somehow in the kernel -- possibly wrongly */
+ {
+ .gpio = S3C2410_GPG(11), /* K6 */
+ .code = KEY_F6,
+ .desc = "Button 6",
+ .active_low = 1,
+ },
+#endif
+};
+
+static struct gpio_keys_platform_data mini2440_button_data = {
+ .buttons = mini2440_buttons,
+ .nbuttons = ARRAY_SIZE(mini2440_buttons),
+};
+
+static struct platform_device mini2440_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mini2440_button_data,
+ }
+};
+
+/* LEDS */
+
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
+ .name = "led1",
+ .gpio = S3C2410_GPB(5),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "heartbeat",
+};
+
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
+ .name = "led2",
+ .gpio = S3C2410_GPB(6),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "nand-disk",
+};
+
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
+ .name = "led3",
+ .gpio = S3C2410_GPB(7),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "mmc0",
+};
+
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
+ .name = "led4",
+ .gpio = S3C2410_GPB(8),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
+ .name = "backlight",
+ .gpio = S3C2410_GPG(4),
+ .def_trigger = "backlight",
+};
+
+static struct platform_device mini2440_led1 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &mini2440_led1_pdata,
+ },
+};
+
+static struct platform_device mini2440_led2 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &mini2440_led2_pdata,
+ },
+};
+
+static struct platform_device mini2440_led3 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &mini2440_led3_pdata,
+ },
+};
+
+static struct platform_device mini2440_led4 = {
+ .name = "s3c24xx_led",
+ .id = 4,
+ .dev = {
+ .platform_data = &mini2440_led4_pdata,
+ },
+};
+
+static struct platform_device mini2440_led_backlight = {
+ .name = "s3c24xx_led",
+ .id = 5,
+ .dev = {
+ .platform_data = &mini2440_led_backlight_pdata,
+ },
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
+ .l3_clk = S3C2410_GPB(4),
+ .l3_mode = S3C2410_GPB(2),
+ .l3_data = S3C2410_GPB(3),
+ .model = UDA134X_UDA1341
+};
+
+static struct platform_device mini2440_audio = {
+ .name = "s3c24xx_uda134x",
+ .id = 0,
+ .dev = {
+ .platform_data = &mini2440_audio_pins,
+ },
+};
+
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c08 = {
+ .byte_len = SZ_8K / 8,
+ .page_size = 16,
+};
+
+static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("24c08", 0x50),
+ .platform_data = &at24c08,
+ },
+};
+
+static struct platform_device uda1340_codec = {
+ .name = "uda134x-codec",
+ .id = -1,
+};
+
+static struct platform_device *mini2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &mini2440_device_eth,
+ &mini2440_led1,
+ &mini2440_led2,
+ &mini2440_led3,
+ &mini2440_led4,
+ &mini2440_button_device,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_iis,
+ &uda1340_codec,
+ &mini2440_audio,
+ &samsung_asoc_dma,
+};
+
+static void __init mini2440_map_io(void)
+{
+ s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+}
+
+/*
+ * mini2440_features string
+ *
+ * t = Touchscreen present
+ * b = backlight control
+ * c = camera [TODO]
+ * 0-9 LCD configuration
+ *
+ */
+static char mini2440_features_str[12] __initdata = "0tb";
+
+static int __init mini2440_features_setup(char *str)
+{
+ if (str)
+ strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+ return 1;
+}
+
+__setup("mini2440=", mini2440_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+#define FEATURE_BACKLIGHT (1 << 1)
+#define FEATURE_TOUCH (1 << 2)
+#define FEATURE_CAMERA (1 << 3)
+
+struct mini2440_features_t {
+ int count;
+ int done;
+ int lcd_index;
+ struct platform_device *optional[8];
+};
+
+static void __init mini2440_parse_features(
+ struct mini2440_features_t * features,
+ const char * features_str )
+{
+ const char * fp = features_str;
+
+ features->count = 0;
+ features->done = 0;
+ features->lcd_index = -1;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
+ printk(KERN_INFO "MINI2440: "
+ "'%c' out of range LCD mode\n", f);
+ else {
+ features->optional[features->count++] =
+ &s3c_device_lcd;
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ case 'b':
+ if (features->done & FEATURE_BACKLIGHT)
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "backlight already set\n", f);
+ else {
+ features->optional[features->count++] =
+ &mini2440_led_backlight;
+ }
+ features->done |= FEATURE_BACKLIGHT;
+ break;
+ case 't':
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "touchscreen not compiled in\n", f);
+ break;
+ case 'c':
+ if (features->done & FEATURE_CAMERA)
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "camera already registered\n", f);
+ else
+ features->optional[features->count++] =
+ &s3c_device_camif;
+ features->done |= FEATURE_CAMERA;
+ break;
+ }
+ }
+}
+
+static void __init mini2440_init(void)
+{
+ struct mini2440_features_t features = { 0 };
+ int i;
+
+ printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+ mini2440_features_str);
+
+ /* Parse the feature string */
+ mini2440_parse_features(&features, mini2440_features_str);
+
+ /* turn LCD on */
+ s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+
+ /* Turn the backlight early on */
+ WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
+ gpio_direction_output(S3C2410_GPG(4), 1);
+
+ /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+ s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+
+ /* mark the key as input, without pullups (there is one on the board) */
+ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
+ s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
+ }
+ if (features.lcd_index != -1) {
+ int li;
+
+ mini2440_fb_info.displays =
+ &mini2440_lcd_cfg[features.lcd_index];
+
+ printk(KERN_INFO "MINI2440: LCD");
+ for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
+ if (li == features.lcd_index)
+ printk(" [%d:%dx%d]", li,
+ mini2440_lcd_cfg[li].width,
+ mini2440_lcd_cfg[li].height);
+ else
+ printk(" %d:%dx%d", li,
+ mini2440_lcd_cfg[li].width,
+ mini2440_lcd_cfg[li].height);
+ printk("\n");
+ s3c24xx_fb_set_platdata(&mini2440_fb_info);
+ }
+
+ s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
+ s3c_nand_set_platdata(&mini2440_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ i2c_register_board_info(0, mini2440_i2c_devs,
+ ARRAY_SIZE(mini2440_i2c_devs));
+
+ platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
+
+ if (features.count) /* the optional features */
+ platform_add_devices(features.optional, features.count);
+
+}
+
+
+MACHINE_START(MINI2440, "MINI2440")
+ /* Maintainer: Michel Pollet <buserror@gmail.com> */
+ .atag_offset = 0x100,
+ .map_io = mini2440_map_io,
+ .init_machine = mini2440_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
+ *
+ * Copyright (c) 2004 Nex Vision
+ * Guillaume GOURAT <guillaume.gourat@nexvision.tv>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 15-10-2004 GG Created initial version
+ * 12-03-2005 BJD Updated for release
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mtd/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "common.h"
+
+static struct map_desc nexcoder_iodesc[] __initdata = {
+ /* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* NOR Flash on NexVision NexCoder 2440 board */
+
+static struct resource nexcoder_nor_resource[] = {
+ [0] = {
+ .start = S3C2410_CS0,
+ .end = S3C2410_CS0 + (8*1024*1024) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct map_info nexcoder_nor_map = {
+ .bankwidth = 2,
+};
+
+static struct platform_device nexcoder_device_nor = {
+ .name = "mtd-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
+ .resource = nexcoder_nor_resource,
+ .dev =
+ {
+ .platform_data = &nexcoder_nor_map,
+ }
+};
+
+/* Standard Nexcoder devices */
+
+static struct platform_device *nexcoder_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_camif,
+ &s3c_device_spi0,
+ &s3c_device_spi1,
+ &nexcoder_device_nor,
+};
+
+static void __init nexcoder_sensorboard_init(void)
+{
+ // Initialize SCCB bus
+ s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+ s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+ s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
+
+ // Power up the sensor board
+ s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+ s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+}
+
+static void __init nexcoder_map_io(void)
+{
+ s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+
+ nexcoder_sensorboard_init();
+}
+
+static void __init nexcoder_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
+
+MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
+ /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+ .atag_offset = 0x100,
+ .map_io = nexcoder_map_io,
+ .init_machine = nexcoder_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
+ *
+ * Copyright (c) 2005-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "common.h"
+
+/* onboard perihperal map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+ /* ISA IO areas (may be over-written later) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)OSIRIS_VA_CTRL0,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_IDREG,
+ .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ }
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp &= ~OSIRIS_CTRL0_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+}
+
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
+ .tacls = 25,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(osiris_nand_sets),
+ .sets = osiris_nand_sets,
+ .select_chip = osiris_nand_select,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+ [0] = {
+ .start = 0x0f000000,
+ .end = 0x0f100000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0c000000,
+ .end = 0x0c100000,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device osiris_pcmcia = {
+ .name = "osiris-pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
+ .resource = osiris_pcmcia_resource,
+};
+
+/* Osiris power management device */
+
+#ifdef CONFIG_PM
+static unsigned char pm_osiris_ctrl0;
+
+static int osiris_pm_suspend(void)
+{
+ unsigned int tmp;
+
+ pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+ /* ensure correct NAND slot is selected on resume */
+ if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+ tmp |= 2;
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+ /* ensure that an nRESET is not generated on resume. */
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+
+ return 0;
+}
+
+static void osiris_pm_resume(void)
+{
+ if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
+ __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+
+ __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define osiris_pm_suspend NULL
+#define osiris_pm_resume NULL
+#endif
+
+static struct syscore_ops osiris_pm_syscore_ops = {
+ .suspend = osiris_pm_suspend,
+ .resume = osiris_pm_resume,
+};
+
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+ /* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+ .name = "osiris-dvs",
+ .id = -1,
+ .dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+ osiris_tps_device.dev.parent = &client->dev;
+ return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+ platform_device_unregister(&osiris_tps_device);
+ return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+ .base = -1, /* GPIO can go anywhere at the moment */
+ .setup = osiris_tps_setup,
+ .teardown = osiris_tps_remove,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ .platform_data = &osiris_tps_board,
+ },
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_wdt,
+ &s3c_device_nand,
+ &osiris_pcmcia,
+};
+
+static struct clk *osiris_clocks[] __initdata = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
+static void __init osiris_map_io(void)
+{
+ unsigned long flags;
+
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = &clk_upll;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = &clk_upll;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
+
+ s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
+ printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
+ __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
+ osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
+ osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
+ } else {
+ /* write-protect line to the NAND */
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ }
+
+ /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+ local_irq_restore(flags);
+}
+
+static void __init osiris_init(void)
+{
+ register_syscore_ops(&osiris_pm_syscore_ops);
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&osiris_nand_info);
+
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
+ i2c_register_board_info(0, osiris_i2c_devs,
+ ARRAY_SIZE(osiris_i2c_devs));
+
+ platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = osiris_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = osiris_init,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
+ *
+ * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+ * Copyright (c) 2007-2010 Vasily Khoruzhick
+ *
+ * based on smdk2440 written by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/device.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-lcd.h>
+#include <mach/h1940.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+#include <plat/ts.h>
+
+#include <sound/uda1380.h>
+
+#include "common.h"
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0xf1,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+};
+
+static struct s3c2410fb_display rx1950_display = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+
+ .pixclock = 260000,
+ .left_margin = 10,
+ .right_margin = 20,
+ .hsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_HWSWP |
+ (0x02 << 13) |
+ (0x02 << 15),
+
+};
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int rx1950_is_ac_online(void)
+{
+ return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(S3C2410_GPF(2));
+}
+
+static char *rx1950_supplicants[] = {
+ "main-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = rx1950_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = rx1950_supplicants,
+ .num_supplicants = ARRAY_SIZE(rx1950_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
+ IORESOURCE_IRQ_HIGHEDGE,
+ .start = IRQ_EINT2,
+ .end = IRQ_EINT2,
+ },
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data =
+ &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+ { .volt = 4100, .cur = 156, .level = 100},
+ { .volt = 4050, .cur = 156, .level = 95},
+ { .volt = 4025, .cur = 141, .level = 90},
+ { .volt = 3995, .cur = 144, .level = 85},
+ { .volt = 3957, .cur = 162, .level = 80},
+ { .volt = 3931, .cur = 147, .level = 75},
+ { .volt = 3902, .cur = 147, .level = 70},
+ { .volt = 3863, .cur = 153, .level = 65},
+ { .volt = 3838, .cur = 150, .level = 60},
+ { .volt = 3800, .cur = 153, .level = 55},
+ { .volt = 3765, .cur = 153, .level = 50},
+ { .volt = 3748, .cur = 172, .level = 45},
+ { .volt = 3740, .cur = 153, .level = 40},
+ { .volt = 3714, .cur = 175, .level = 35},
+ { .volt = 3710, .cur = 156, .level = 30},
+ { .volt = 3963, .cur = 156, .level = 25},
+ { .volt = 3672, .cur = 178, .level = 20},
+ { .volt = 3651, .cur = 178, .level = 15},
+ { .volt = 3629, .cur = 178, .level = 10},
+ { .volt = 3612, .cur = 162, .level = 5},
+ { .volt = 3605, .cur = 162, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+ { .volt = 4200, .cur = 0, .level = 100},
+ { .volt = 4190, .cur = 0, .level = 99},
+ { .volt = 4178, .cur = 0, .level = 95},
+ { .volt = 4110, .cur = 0, .level = 70},
+ { .volt = 4076, .cur = 0, .level = 65},
+ { .volt = 4046, .cur = 0, .level = 60},
+ { .volt = 4021, .cur = 0, .level = 55},
+ { .volt = 3999, .cur = 0, .level = 50},
+ { .volt = 3982, .cur = 0, .level = 45},
+ { .volt = 3965, .cur = 0, .level = 40},
+ { .volt = 3957, .cur = 0, .level = 35},
+ { .volt = 3948, .cur = 0, .level = 30},
+ { .volt = 3936, .cur = 0, .level = 25},
+ { .volt = 3927, .cur = 0, .level = 20},
+ { .volt = 3906, .cur = 0, .level = 15},
+ { .volt = 3880, .cur = 0, .level = 10},
+ { .volt = 3829, .cur = 0, .level = 5},
+ { .volt = 3820, .cur = 0, .level = 0},
+};
+
+static int rx1950_bat_init(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
+ if (ret)
+ goto err_gpio1;
+ ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
+ if (ret)
+ goto err_gpio2;
+
+ return 0;
+
+err_gpio2:
+ gpio_free(S3C2410_GPJ(2));
+err_gpio1:
+ return ret;
+}
+
+static void rx1950_bat_exit(void)
+{
+ gpio_free(S3C2410_GPJ(2));
+ gpio_free(S3C2410_GPJ(3));
+}
+
+static void rx1950_enable_charger(void)
+{
+ gpio_direction_output(S3C2410_GPJ(2), 1);
+ gpio_direction_output(S3C2410_GPJ(3), 1);
+}
+
+static void rx1950_disable_charger(void)
+{
+ gpio_direction_output(S3C2410_GPJ(2), 0);
+ gpio_direction_output(S3C2410_GPJ(3), 0);
+}
+
+static DEFINE_SPINLOCK(rx1950_blink_spin);
+
+static int rx1950_led_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ int blink_gpio, check_gpio;
+
+ switch (gpio) {
+ case S3C2410_GPA(6):
+ blink_gpio = S3C2410_GPA(4);
+ check_gpio = S3C2410_GPA(3);
+ break;
+ case S3C2410_GPA(7):
+ blink_gpio = S3C2410_GPA(3);
+ check_gpio = S3C2410_GPA(4);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ spin_lock(&rx1950_blink_spin);
+
+ switch (state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ if (!gpio_get_value(check_gpio))
+ gpio_set_value(S3C2410_GPJ(6), 0);
+ gpio_set_value(blink_gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ gpio_set_value(gpio, 0);
+ gpio_set_value(S3C2410_GPJ(6), 1);
+ gpio_set_value(blink_gpio, 1);
+ break;
+ }
+
+ spin_unlock(&rx1950_blink_spin);
+
+ return 0;
+}
+
+static struct gpio_led rx1950_leds_desc[] = {
+ {
+ .name = "Green",
+ .default_trigger = "main-battery-full",
+ .gpio = S3C2410_GPA(6),
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Red",
+ .default_trigger
+ = "main-battery-charging-blink-full-solid",
+ .gpio = S3C2410_GPA(7),
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Blue",
+ .default_trigger = "rx1950-acx-mem",
+ .gpio = S3C2410_GPA(11),
+ .retain_state_suspended = 1,
+ },
+};
+
+static struct gpio_led_platform_data rx1950_leds_pdata = {
+ .num_leds = ARRAY_SIZE(rx1950_leds_desc),
+ .leds = rx1950_leds_desc,
+ .gpio_blink_set = rx1950_led_blink_set,
+};
+
+static struct platform_device rx1950_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rx1950_leds_pdata,
+ },
+};
+
+static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
+ .init = rx1950_bat_init,
+ .exit = rx1950_bat_exit,
+ .enable_charger = rx1950_enable_charger,
+ .disable_charger = rx1950_disable_charger,
+ .gpio_charge_finished = S3C2410_GPF(3),
+ .lut_noac = bat_lut_noac,
+ .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+ .lut_acin = bat_lut_acin,
+ .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+ .volt_channel = 0,
+ .current_channel = 1,
+ .volt_mult = 4235,
+ .current_mult = 2900,
+ .internal_impedance = 200,
+};
+
+static struct platform_device rx1950_battery = {
+ .name = "s3c-adc-battery",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_adc.dev,
+ .platform_data = &rx1950_bat_cfg,
+ },
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+ .displays = &rx1950_display,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0x02,
+ .gpccon = 0xaa9556a9,
+ .gpccon_mask = 0xffc003fc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa90aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000fcfd,
+ .gpdup_mask = 0xffffffff,
+
+};
+
+static struct pwm_device *lcd_pwm;
+
+static void rx1950_lcd_power(int enable)
+{
+ int i;
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+
+ /* GPC11-GPC15->OUTPUT */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 1);
+
+ /* Wait a bit here... */
+ mdelay(100);
+
+ /* GPD2-GPD7->OUTPUT */
+ /* GPD11-GPD15->OUTPUT */
+ /* GPD2-GPD7->1, GPD11-GPD15->1 */
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+
+ /* Wait a bit here...*/
+ mdelay(100);
+
+ /* GPB0->OUTPUT, GPB0->0 */
+ gpio_direction_output(S3C2410_GPB(0), 0);
+
+ /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+ for (i = 1; i < 5; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPC15-GPC11->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPD15-GPD11->0, GPD2->GPD7->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ /* GPC6->0, GPC7->0, GPC5->0 */
+ gpio_direction_output(S3C2410_GPC(6), 0);
+ gpio_direction_output(S3C2410_GPC(7), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
+
+ /* GPB1->OUTPUT, GPB1->0 */
+ gpio_direction_output(S3C2410_GPB(1), 0);
+ pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
+ pwm_disable(lcd_pwm);
+
+ /* GPC0->0, GPC10->0 */
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(10), 0);
+ } else {
+ pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
+ pwm_enable(lcd_pwm);
+
+ gpio_direction_output(S3C2410_GPC(0), 1);
+ gpio_direction_output(S3C2410_GPC(5), 1);
+
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+ gpio_direction_output(S3C2410_GPC(7), 1);
+
+ for (i = 1; i < 5; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 2; i < 8; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ gpio_direction_output(S3C2410_GPC(10), 1);
+ gpio_direction_output(S3C2410_GPC(6), 1);
+ }
+ enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ } else {
+ /* LED driver need a "push" to power on */
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ /* Warm up backlight for one period of PWM.
+ * Without this trick its almost impossible to
+ * enable backlight with low brightness value
+ */
+ ndelay(48000);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ }
+ enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+ WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+ lcd_pwm = pwm_request(1, "RX1950 LCD");
+ if (IS_ERR(lcd_pwm)) {
+ dev_err(dev, "Unable to request PWM for LCD power!\n");
+ return PTR_ERR(lcd_pwm);
+ }
+
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+
+ return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+
+ pwm_free(lcd_pwm);
+ gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+ } else {
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+ }
+ return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 24,
+ .dft_brightness = 4,
+ .pwm_period_ns = 48000,
+ .init = rx1950_backlight_init,
+ .notify = rx1950_backlight_notify,
+ .exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &rx1950_backlight_data,
+ },
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_OFF:
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ gpio_direction_output(S3C2410_GPJ(1), 1);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPF(5),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = rx1950_set_mmc_power,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+ [0] = {
+ .name = "Boot0",
+ .offset = 0,
+ .size = 0x4000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Boot1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x300000,
+ .mask_flags = 0,
+ },
+ [3] = {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+ .partitions = rx1950_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+ .sets = rx1950_nand_sets,
+};
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(5),
+ .vbus_pin_inverted = 1,
+ .pullup_pin = S3C2410_GPJ(5),
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S3C2410_GPF(0),
+ .active_low = 1,
+ .desc = "Power button",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_F5,
+ .gpio = S3C2410_GPF(7),
+ .active_low = 1,
+ .desc = "Record button",
+ },
+ {
+ .code = KEY_F1,
+ .gpio = S3C2410_GPG(0),
+ .active_low = 1,
+ .desc = "Calendar button",
+ },
+ {
+ .code = KEY_F2,
+ .gpio = S3C2410_GPG(2),
+ .active_low = 1,
+ .desc = "Contacts button",
+ },
+ {
+ .code = KEY_F3,
+ .gpio = S3C2410_GPG(3),
+ .active_low = 1,
+ .desc = "Mail button",
+ },
+ {
+ .code = KEY_F4,
+ .gpio = S3C2410_GPG(7),
+ .active_low = 1,
+ .desc = "WLAN button",
+ },
+ {
+ .code = KEY_LEFT,
+ .gpio = S3C2410_GPG(10),
+ .active_low = 1,
+ .desc = "Left button",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = S3C2410_GPG(11),
+ .active_low = 1,
+ .desc = "Right button",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = S3C2410_GPG(4),
+ .active_low = 1,
+ .desc = "Up button",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = S3C2410_GPG(6),
+ .active_low = 1,
+ .desc = "Down button",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = S3C2410_GPG(9),
+ .active_low = 1,
+ .desc = "Ok button"
+ },
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+ .buttons = rx1950_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = S3C2410_GPJ(0),
+ .gpio_reset = S3C2410_GPD(0),
+ .dac_clk = UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info rx1950_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x1a),
+ .platform_data = &uda1380_info,
+ },
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &samsung_asoc_dma,
+ &s3c_device_usbgadget,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c_device_timer[1],
+ &rx1950_backlight,
+ &rx1950_device_gpiokeys,
+ &power_supply,
+ &rx1950_battery,
+ &rx1950_leds,
+};
+
+static struct clk *rx1950_clocks[] __initdata = {
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+};
+
+static void __init rx1950_map_io(void)
+{
+ s3c24xx_clkout0.parent = &clk_h;
+ s3c24xx_clkout1.parent = &clk_f;
+
+ s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+
+ s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+ s3c_pm_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+ int i;
+
+ s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+ s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+ s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+ s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&rx1950_nand_info);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ /* mmc power is disabled by default */
+ WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+
+ for (i = 0; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 10; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 2; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ for (i = 11; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
+ WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
+ WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
+ gpio_direction_output(S3C2410_GPA(3), 0);
+ gpio_direction_output(S3C2410_GPA(4), 0);
+ gpio_direction_output(S3C2410_GPJ(6), 0);
+
+ platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+
+ i2c_register_board_info(0, rx1950_i2c_devices,
+ ARRAY_SIZE(rx1950_i2c_devices));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+ /* Maintainers: Vasily Khoruzhick */
+ .atag_offset = 0x100,
+ .map_io = rx1950_map_io,
+ .reserve = rx1950_reserve,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = rx1950_init_machine,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.handhelds.org/projects/rx3715.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/h1940.h>
+#include <plat/nand.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "common.h"
+
+static struct map_desc rx3715_iodesc[] __initdata = {
+ /* dump ISA space somewhere unused */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x00,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .uart_flags = UPF_CONS_FLOW,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ }
+};
+
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 36,
+ .right_margin = 36,
+ .hsync_len = 8,
+ .upper_margin = 6,
+ .lower_margin = 7,
+ .vsync_len = 3,
+};
+
+static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
+
+ .displays = &rx3715_lcdcfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0xf82,
+
+ .gpccon = 0xaa955699,
+ .gpccon_mask = 0xffc003cc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa95aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+};
+
+static struct mtd_partition __initdata rx3715_nand_part[] = {
+ [0] = {
+ .name = "Whole Flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
+ .partitions = rx3715_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
+ .sets = rx3715_nand_sets,
+};
+
+static struct platform_device *rx3715_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_nand,
+};
+
+static void __init rx3715_map_io(void)
+{
+ s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+static void __init rx3715_init_irq(void)
+{
+ s3c24xx_init_irq();
+}
+
+static void __init rx3715_init_machine(void)
+{
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+ s3c_pm_init();
+
+ s3c_nand_set_platdata(&rx3715_nand_info);
+ s3c24xx_fb_set_platdata(&rx3715_fb_info);
+ platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
+}
+
+MACHINE_START(RX3715, "IPAQ-RX3715")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+ .map_io = rx3715_map_io,
+ .reserve = rx3715_reserve,
+ .init_irq = rx3715_init_irq,
+ .init_machine = rx3715_init_machine,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- .restart = s3c2440_restart,
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/fb.h>
+#include <plat/iic.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/common-smdk.h>
+
+#include "common.h"
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 20,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 4,
+};
+
+static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
+ .displays = &smdk2440_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+};
+
+static void __init smdk2440_map_io(void)
+{
+ s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+ s3c24xx_init_clocks(16934400);
+ s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+}
+
+static void __init smdk2440_machine_init(void)
+{
+ s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2440_map_io,
+ .init_machine = smdk2440_machine_init,
+ .timer = &s3c24xx_timer,
++ .restart = s3c244x_restart,
+MACHINE_END
--- /dev/null
- #include <plat/watchdog-reset.h>
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+#include <plat/pm.h>
-
- void s3c2440_restart(char mode, const char *cmd)
- {
- if (mode == 's') {
- soft_restart(0);
- }
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
- }
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct device s3c2440_dev = {
+ .bus = &s3c2440_subsys,
+};
+
+int __init s3c2440_init(void)
+{
+ printk("S3C2440: Initialising architecture\n");
+
+ /* change irq for watchdog */
+
+ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+
+ /* register suspend/resume handlers */
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ /* register our system device for everything else */
+
+ return device_register(&s3c2440_dev);
+}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+}
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/nand-core.h>
++#include <plat/watchdog-reset.h>
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(void)
+{
+ /* register our io-tables */
+
+ iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+
+ /* rename any peripherals used differing from the s3c2410 */
+
+ s3c_device_sdi.name = "s3c2440-sdi";
+ s3c_device_i2c0.name = "s3c2440-i2c";
+ s3c_nand_setname("s3c2440-nand");
+ s3c_device_ts.name = "s3c2440-ts";
+ s3c_device_usbgadget.name = "s3c2440-usbgadget";
+}
+
+void __init_or_cpufreq s3c244x_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long clkdiv;
+ unsigned long camdiv;
+ unsigned long xtal;
+ unsigned long hclk, fclk, pclk;
+ int hdiv = 1;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ /* work out clock scalings */
+
+ switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
+ case S3C2440_CLKDIVN_HDIVN_1:
+ hdiv = 1;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_2:
+ hdiv = 2;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_4_8:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_3_6:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
+ break;
+ }
+
+ hclk = fclk / hdiv;
+ pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brief summary of clocks, etc */
+
+ printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
+ /* initialise the clocks here, to allow other things like the
+ * console to use them, and to add new ones after the initialisation
+ */
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c244x_setup_clocks();
+ s3c2410_baseclk_add();
+}
+
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
+
+struct bus_type s3c2440_subsys = {
+ .name = "s3c2440-core",
+ .dev_name = "s3c2440-core",
+};
+
+struct bus_type s3c2442_subsys = {
+ .name = "s3c2442-core",
+ .dev_name = "s3c2442-core",
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+ return subsys_system_register(&s3c2440_subsys, NULL);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+ return subsys_system_register(&s3c2442_subsys, NULL);
+}
+
+core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static void s3c244x_resume(void)
+{
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume NULL
+#endif
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume,
+};
++
++void s3c244x_restart(char mode, const char *cmd)
++{
++ if (mode == 's')
++ soft_restart(0);
++
++ arch_wdt_reset();
++
++ /* we'll take a jump through zero as a poor second */
++ soft_restart(0);
++}
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff