drm/i915: Introduce intel_prepare_cursor_plane() (v2)
authorMatt Roper <matthew.d.roper@intel.com>
Mon, 1 Dec 2014 23:40:12 +0000 (15:40 -0800)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Sat, 6 Dec 2014 00:46:22 +0000 (01:46 +0100)
Primary and sprite planes have already been refactored to include a
'prepare' step which handles all the commit-time operations that could
fail (i.e., pinning buffers and such).  Refactor the cursor commit in a
similar manner.

For simplicity and consistency with other plane types, we also switch to
using intel_pin_and_fence_fb_obj() to perform our pinning for
non-physical cursors.  This will allow us to more easily migrate the
code into the atomic 'begin' handler in a plane-agnostic manner in a
future patchset.

v2:
 - Update GEM fb tracking for physical cursors too. (Ander)
 - Use intel_unpin_fb_obj() rather than
   i915_gem_object_unpin_from_display_plane() and do so while holding
   struct_mutex.  (Ander)
 - Update plane->fb in commit_cursor_plane.  This isn't really necessary
   since the DRM core does this for us in __setplane_internal(), but
   doing it in our driver once we know we're going to succeed helps
   avoid confusion. (Ander)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_display.c

index 76896e8c09ee286f6b8b24a313562a2bdee0c388..78c0e1c10c441bdc9a2dc889066487e8e4ae868b 100644 (file)
@@ -12014,20 +12014,55 @@ intel_check_cursor_plane(struct drm_plane *plane,
 }
 
 static int
+intel_prepare_cursor_plane(struct drm_plane *plane,
+                          struct intel_plane_state *state)
+{
+       struct drm_device *dev = plane->dev;
+       struct drm_framebuffer *fb = state->fb;
+       struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc);
+       struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+       struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
+       enum pipe pipe = intel_crtc->pipe;
+       int ret = 0;
+
+       if (old_obj != obj) {
+               /* we only need to pin inside GTT if cursor is non-phy */
+               mutex_lock(&dev->struct_mutex);
+               if (!INTEL_INFO(dev)->cursor_needs_physical) {
+                       if (obj)
+                               ret = intel_pin_and_fence_fb_obj(plane, fb, NULL);
+               } else {
+                       int align = IS_I830(dev) ? 16 * 1024 : 256;
+                       if (obj)
+                               ret = i915_gem_object_attach_phys(obj, align);
+                       if (ret)
+                               DRM_DEBUG_KMS("failed to attach phys object\n");
+               }
+
+               if (ret == 0)
+                       i915_gem_track_fb(intel_crtc->cursor_bo, obj,
+                                         INTEL_FRONTBUFFER_CURSOR(pipe));
+
+               mutex_unlock(&dev->struct_mutex);
+       }
+
+       return ret;
+}
+
+static void
 intel_commit_cursor_plane(struct drm_plane *plane,
                          struct intel_plane_state *state)
 {
        struct drm_crtc *crtc = state->crtc;
        struct drm_device *dev = crtc->dev;
-       struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        struct intel_plane *intel_plane = to_intel_plane(plane);
        struct drm_i915_gem_object *obj = intel_fb_obj(state->fb);
        enum pipe pipe = intel_crtc->pipe;
        unsigned old_width;
        uint32_t addr;
-       int ret;
 
+       plane->fb = state->fb;
        crtc->cursor_x = state->orig_dst.x1;
        crtc->cursor_y = state->orig_dst.y1;
 
@@ -12044,75 +12079,21 @@ intel_commit_cursor_plane(struct drm_plane *plane,
        if (intel_crtc->cursor_bo == obj)
                goto update;
 
-       /* if we want to turn off the cursor ignore width and height */
-       if (!obj) {
-               DRM_DEBUG_KMS("cursor off\n");
+       if (!obj)
                addr = 0;
-               mutex_lock(&dev->struct_mutex);
-               goto finish;
-       }
-
-       /* we only need to pin inside GTT if cursor is non-phy */
-       mutex_lock(&dev->struct_mutex);
-       if (!INTEL_INFO(dev)->cursor_needs_physical) {
-               unsigned alignment;
-
-               /*
-                * Global gtt pte registers are special registers which actually
-                * forward writes to a chunk of system memory. Which means that
-                * there is no risk that the register values disappear as soon
-                * as we call intel_runtime_pm_put(), so it is correct to wrap
-                * only the pin/unpin/fence and not more.
-                */
-               intel_runtime_pm_get(dev_priv);
-
-               /* Note that the w/a also requires 2 PTE of padding following
-                * the bo. We currently fill all unused PTE with the shadow
-                * page and so we should always have valid PTE following the
-                * cursor preventing the VT-d warning.
-                */
-               alignment = 0;
-               if (need_vtd_wa(dev))
-                       alignment = 64*1024;
-
-               ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
-               if (ret) {
-                       DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
-                       intel_runtime_pm_put(dev_priv);
-                       goto fail_locked;
-               }
-
-               ret = i915_gem_object_put_fence(obj);
-               if (ret) {
-                       DRM_DEBUG_KMS("failed to release fence for cursor");
-                       intel_runtime_pm_put(dev_priv);
-                       goto fail_unpin;
-               }
-
+       else if (!INTEL_INFO(dev)->cursor_needs_physical)
                addr = i915_gem_obj_ggtt_offset(obj);
-
-               intel_runtime_pm_put(dev_priv);
-
-       } else {
-               int align = IS_I830(dev) ? 16 * 1024 : 256;
-               ret = i915_gem_object_attach_phys(obj, align);
-               if (ret) {
-                       DRM_DEBUG_KMS("failed to attach phys object\n");
-                       goto fail_locked;
-               }
+       else
                addr = obj->phys_handle->busaddr;
-       }
 
-finish:
        if (intel_crtc->cursor_bo) {
-               if (!INTEL_INFO(dev)->cursor_needs_physical)
-                       i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
+               if (!INTEL_INFO(dev)->cursor_needs_physical) {
+                       mutex_lock(&dev->struct_mutex);
+                       intel_unpin_fb_obj(intel_crtc->cursor_bo);
+                       mutex_unlock(&dev->struct_mutex);
+               }
        }
 
-       i915_gem_track_fb(intel_crtc->cursor_bo, obj,
-                         INTEL_FRONTBUFFER_CURSOR(pipe));
-       mutex_unlock(&dev->struct_mutex);
-
        intel_crtc->cursor_addr = addr;
        intel_crtc->cursor_bo = obj;
 update:
@@ -12128,13 +12109,6 @@ update:
 
                intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
        }
-
-       return 0;
-fail_unpin:
-       i915_gem_object_unpin_from_display_plane(obj);
-fail_locked:
-       mutex_unlock(&dev->struct_mutex);
-       return ret;
 }
 
 static int
@@ -12175,7 +12149,13 @@ intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
        if (ret)
                return ret;
 
-       return intel_commit_cursor_plane(plane, &state);
+       ret = intel_prepare_cursor_plane(plane, &state);
+       if (ret)
+               return ret;
+
+       intel_commit_cursor_plane(plane, &state);
+
+       return 0;
 }
 
 static const struct drm_plane_funcs intel_cursor_plane_funcs = {