ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s

Sometime will hang if you set the i2s pinctrl as the none setting.
Let's set the pinctrl as the default setting to enable the gpio bias.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1e068771ba2d822d4c2fae79173a8a29e6..8f1bb0fbf768df2bb562f62beb7236f255c440cc 100644 (file)
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -579,12 +579,12 @@
 
                i2s {
                        i2s_bus: i2s-bus {
-                               rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
-                                               <1 1 RK_FUNC_1 &pcfg_pull_none>,
-                                               <1 2 RK_FUNC_1 &pcfg_pull_none>,
-                                               <1 3 RK_FUNC_1 &pcfg_pull_none>,
-                                               <1 4 RK_FUNC_1 &pcfg_pull_none>,
-                                               <1 5 RK_FUNC_1 &pcfg_pull_none>;
+                               rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
+                                               <1 1 RK_FUNC_1 &pcfg_pull_default>,
+                                               <1 2 RK_FUNC_1 &pcfg_pull_default>,
+                                               <1 3 RK_FUNC_1 &pcfg_pull_default>,
+                                               <1 4 RK_FUNC_1 &pcfg_pull_default>,
+                                               <1 5 RK_FUNC_1 &pcfg_pull_default>;
                        };
                };