*/
#define UL(x) _AC(x, UL)
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
#ifdef CONFIG_MMU
/*
#include <linux/string.h> /* memcpy */
#include <asm/cputype.h>
#include <asm/mach/map.h>
-#include <mach/memory.h>
+#include <asm/memory.h>
#include "tcm.h"
static struct gen_pool *tcm_pool;
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0xf0000000)
+#define PLAT_PHYS_OFFSET UL(0xf0000000)
#endif /* __ASM_ARCH_MEMORY_H */
#include <mach/hardware.h>
-#define PHYS_OFFSET (AT91_SDRAM_BASE)
+#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE)
#endif
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
-#define RAM_START PHYS_OFFSET
+#define RAM_START PLAT_PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
-#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
/*
* Maximum DMA memory allowed is 14M
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
#error Cannot enable DaVinci and DA8XX platforms concurrently
#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PHYS_OFFSET DA8XX_DDR_BASE
+#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
#else
-#define PHYS_OFFSET DAVINCI_DDR_BASE
+#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
#endif
#define DDR2_SDRCR_OFFSET 0xc
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
/*
* Cache flushing area - SRAM
#define __ASM_ARCH_MEMORY_H
#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xd0000000)
+#define PLAT_PHYS_OFFSET UL(0xd0000000)
#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xe0000000)
+#define PLAT_PHYS_OFFSET UL(0xe0000000)
#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xf0000000)
+#define PLAT_PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define FLUSH_BASE_PHYS 0x50000000
#define __MACH_MEMORY_H
#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PHYS_OFFSET UL(0x00000000)
+# define PLAT_PHYS_OFFSET UL(0x00000000)
#else
-# define PHYS_OFFSET UL(0x10000000)
+# define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif /* __MACH_MEMORY_H */
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x40000000)
+#define PLAT_PHYS_OFFSET UL(0x40000000)
/*
* This is the maximum DMA address that can be DMAd to.
* There should not be more than (0xd0000000 - 0xc0000000)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#ifndef __ASSEMBLY__
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xa0000000)
+#define PLAT_PHYS_OFFSET UL(0xa0000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#include <mach/ixp2000-regs.h>
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000)
+#define PLAT_PHYS_OFFSET (0x00000000)
#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical SRAM offset.
*/
-#define PHYS_OFFSET KS8695_SDRAM_PA
+#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA
#ifndef __ASSEMBLY__
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
/*
* Sparsemem version of the above
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset of bank 0
*/
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __ASM_MACH_MEMORY_H */
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/memory.h>
#include <asm/setup.h>
#include <mach/gpio.h>
#include <mach/board.h>
-#include <mach/memory.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
/* physical offset of RAM */
#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_ARCH_QSD8X50)
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#elif defined(CONFIG_ARCH_MSM7X30)
-#define PHYS_OFFSET UL(0x00200000)
+#define PLAT_PHYS_OFFSET UL(0x00200000)
#elif defined(CONFIG_ARCH_MSM8X60)
-#define PHYS_OFFSET UL(0x40200000)
+#define PLAT_PHYS_OFFSET UL(0x40200000)
#else
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#include <asm/irq.h>
#include <asm/mach-types.h>
+#include <asm/memory.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
-#include <mach/memory.h>
#include "devices-imx31.h"
#include "devices.h"
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xa0000000)
+#define PLAT_PHYS_OFFSET UL(0xa0000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
* Physical DRAM offset.
*/
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#define PHYS_OFFSET UL(0x70000000)
+#define PLAT_PHYS_OFFSET UL(0x70000000)
#else
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
/*
* Cache flushing area - ROM
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x0C000000)
+#define PLAT_PHYS_OFFSET UL(0x0C000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x30000000)
+#define PLAT_PHYS_OFFSET UL(0x30000000)
#endif
#ifndef __ASM_ARCH_24A0_MEMORY_H
#define __ASM_ARCH_24A0_MEMORY_H __FILE__
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x50000000)
+#define PLAT_PHYS_OFFSET UL(0x50000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
-#define PHYS_OFFSET UL(0x40000000)
+#define PLAT_PHYS_OFFSET UL(0x40000000)
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
/*
* Physical DRAM offset is 0xc0000000 on the SA1100
*/
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
#ifndef __ASSEMBLY__
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x08000000)
+#define PLAT_PHYS_OFFSET UL(0x08000000)
#ifndef __ASSEMBLY__
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
-#define PHYS_OFFSET UL(CONFIG_MEMORY_START)
+#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
/* DMA memory at 0xf6000000 - 0xffdfffff */
#define __MACH_TEGRA_MEMORY_H
/* physical offset of RAM */
-#define PHYS_OFFSET UL(0)
+#define PLAT_PHYS_OFFSET UL(0)
#endif
#ifdef CONFIG_MACH_U300_DUAL_RAM
-#define PHYS_OFFSET UL(0x48000000)
+#define PLAT_PHYS_OFFSET UL(0x48000000)
#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
#else
#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PHYS_OFFSET (0x28000000 + \
+#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
#else
-#define PHYS_OFFSET (0x28000000 + \
+#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
#endif
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/memory.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/memory.h>
static void __init u300_reserve(void)
{
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x60000000)
+#define PLAT_PHYS_OFFSET UL(0x60000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
# if defined CONFIG_ARCH_MX1
-# define PHYS_OFFSET MX1_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET
# elif defined CONFIG_MACH_MX21
-# define PHYS_OFFSET MX21_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX25
-# define PHYS_OFFSET MX25_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET
# elif defined CONFIG_MACH_MX27
-# define PHYS_OFFSET MX27_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX3
-# define PHYS_OFFSET MX3x_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
# elif defined CONFIG_ARCH_MXC91231
-# define PHYS_OFFSET MXC91231_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX50
-# define PHYS_OFFSET MX50_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX51
-# define PHYS_OFFSET MX51_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX53
-# define PHYS_OFFSET MX53_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET
# endif
#endif
* Physical DRAM offset.
*/
#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#else
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
#define __PLAT_MEMORY_H
/* Physical DRAM offset */
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __PLAT_MEMORY_H */
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x40000000)
+#define PLAT_PHYS_OFFSET UL(0x40000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif