[PATCH] root hub updates (greater half)
authorDavid Brownell <david-b@pacbell.net>
Fri, 23 Sep 2005 05:37:29 +0000 (22:37 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 28 Oct 2005 23:47:40 +0000 (16:47 -0700)
This patch associates hub suspend and resume logic (including for root hubs)
with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying
two troublesome versions of suspend logic into just one.  It'll be easier to
keep things right from now on.

  - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of
    only when USB_SUSPEND is enabled:
     * Those root hub methods are now called from hub suspend/resume;
       no more skipping between layers during device suspend/resume;
     * It now handles cases allowed by sysfs or autosuspended root hubs,
       by forcing the hub interface to resume too.

  - All devices, including virtual root hubs, now get the same treatment
    on their resume paths ... including re-activating all their interfaces.

Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and
updates the Kconfig to match the new definition of USB_SUSPEND:  it provides
(a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream
from any device configuration which supports it.

This calls for minor followup patches for most HCDs (and their PCI glue).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
 drivers/usb/core/Kconfig |   11 ++-
 drivers/usb/core/hub.c   |  163 +++++++++++++++++++++++++----------------------
 2 files changed, 97 insertions(+), 77 deletions(-)

drivers/usb/core/Kconfig
drivers/usb/core/hub.c

index 1a9ff6184943e2c33e6a34673232c88501437339..ff03184da403b1bf015277f9993bd500ba73ca32 100644 (file)
@@ -61,14 +61,17 @@ config USB_DYNAMIC_MINORS
          If you are unsure about this, say N here.
 
 config USB_SUSPEND
-       bool "USB suspend/resume (EXPERIMENTAL)"
+       bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)"
        depends on USB && PM && EXPERIMENTAL
        help
          If you say Y here, you can use driver calls or the sysfs
          "power/state" file to suspend or resume individual USB
-         peripherals.  There are many related features, such as
-         remote wakeup and driver-specific suspend processing, that
-         may not yet work as expected.
+         peripherals.
+
+         Also, USB "remote wakeup" signaling is supported, whereby some
+         USB devices (like keyboards and network adapters) can wake up
+         their parent hub.  That wakeup cascades up the USB tree, and
+         could wake the system from states like suspend-to-RAM.
 
          If you are unsure about this, say N here.
 
index 3c8d8d1f993c21ee0c1b78b071cc4aed05d8b5cf..6a601a4547e7d26bda22a470af7592d02d230bbd 100644 (file)
@@ -1612,7 +1612,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1,
  */
 static int __usb_suspend_device (struct usb_device *udev, int port1)
 {
-       int     status;
+       int     status = 0;
 
        /* caller owns the udev device lock */
        if (port1 < 0)
@@ -1638,21 +1638,10 @@ static int __usb_suspend_device (struct usb_device *udev, int port1)
                }
        }
 
-       /* "global suspend" of the HC-to-USB interface (root hub), or
-        * "selective suspend" of just one hub-device link.
+       /* we only change a device's upstream USB link.
+        * root hubs have no upstream USB link.
         */
-       if (!udev->parent) {
-               struct usb_bus  *bus = udev->bus;
-               if (bus && bus->op->hub_suspend) {
-                       status = bus->op->hub_suspend (bus);
-                       if (status == 0) {
-                               dev_dbg(&udev->dev, "usb suspend\n");
-                               usb_set_device_state(udev,
-                                               USB_STATE_SUSPENDED);
-                       }
-               } else
-                       status = -EOPNOTSUPP;
-       } else
+       if (udev->parent)
                status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
                                udev);
 
@@ -1661,6 +1650,8 @@ static int __usb_suspend_device (struct usb_device *udev, int port1)
        return status;
 }
 
+#endif
+
 /**
  * usb_suspend_device - suspend a usb device
  * @udev: device that's no longer in active use
@@ -1683,6 +1674,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1)
  */
 int usb_suspend_device(struct usb_device *udev)
 {
+#ifdef CONFIG_USB_SUSPEND
        int     port1, status;
 
        port1 = locktree(udev);
@@ -1692,8 +1684,14 @@ int usb_suspend_device(struct usb_device *udev)
        status = __usb_suspend_device(udev, port1);
        usb_unlock_device(udev);
        return status;
+#else
+       /* NOTE:  udev->state unchanged, it's not lying ... */
+       udev->dev.power.power_state = PMSG_SUSPEND;
+       return 0;
+#endif
 }
 
+
 /*
  * If the USB "suspend" state is in use (rather than "global suspend"),
  * many devices will be individually taken out of suspend state using
@@ -1702,13 +1700,13 @@ int usb_suspend_device(struct usb_device *udev)
  * resume (by host) or remote wakeup (by device) ... now see what changed
  * in the tree that's rooted at this device.
  */
-static int finish_port_resume(struct usb_device *udev)
+static int finish_device_resume(struct usb_device *udev)
 {
        int     status;
        u16     devstatus;
 
        /* caller owns the udev device lock */
-       dev_dbg(&udev->dev, "usb resume\n");
+       dev_dbg(&udev->dev, "finish resume\n");
 
        /* usb ch9 identifies four variants of SUSPENDED, based on what
         * state the device resumes to.  Linux currently won't see the
@@ -1718,7 +1716,6 @@ static int finish_port_resume(struct usb_device *udev)
        usb_set_device_state(udev, udev->actconfig
                        ? USB_STATE_CONFIGURED
                        : USB_STATE_ADDRESS);
-       udev->dev.power.power_state = PMSG_ON;
 
        /* 10.5.4.5 says be sure devices in the tree are still there.
         * For now let's assume the device didn't go crazy on resume,
@@ -1734,7 +1731,8 @@ static int finish_port_resume(struct usb_device *udev)
                int             (*resume)(struct device *);
 
                le16_to_cpus(&devstatus);
-               if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+               if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)
+                               && udev->parent) {
                        status = usb_control_msg(udev,
                                        usb_sndctrlpipe(udev, 0),
                                        USB_REQ_CLEAR_FEATURE,
@@ -1764,6 +1762,8 @@ static int finish_port_resume(struct usb_device *udev)
        return status;
 }
 
+#ifdef CONFIG_USB_SUSPEND
+
 static int
 hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
 {
@@ -1809,7 +1809,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
                        /* TRSMRCY = 10 msec */
                        msleep(10);
                        if (udev)
-                               status = finish_port_resume(udev);
+                               status = finish_device_resume(udev);
                }
        }
        if (status < 0)
@@ -1818,7 +1818,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
        return status;
 }
 
-static int hub_resume (struct usb_interface *intf);
+#endif
 
 /**
  * usb_resume_device - re-activate a suspended usb device
@@ -1841,35 +1841,22 @@ int usb_resume_device(struct usb_device *udev)
        if (port1 < 0)
                return port1;
 
-       /* "global resume" of the HC-to-USB interface (root hub), or
-        * selective resume of one hub-to-device port
-        */
-       if (!udev->parent) {
-               struct usb_bus  *bus = udev->bus;
-               if (bus && bus->op->hub_resume) {
-                       status = bus->op->hub_resume (bus);
+#ifdef CONFIG_USB_SUSPEND
+       /* selective resume of one downstream hub-to-device port */
+       if (udev->parent) {
+               if (udev->state == USB_STATE_SUSPENDED) {
+                       // NOTE swsusp may bork us, device state being wrong...
+                       // NOTE this fails if parent is also suspended...
+                       status = hub_port_resume(hdev_to_hub(udev->parent),
+                                       port1, udev);
                } else
-                       status = -EOPNOTSUPP;
-               if (status == 0) {
-                       dev_dbg(&udev->dev, "usb resume\n");
-                       /* TRSMRCY = 10 msec */
-                       msleep(10);
-                       usb_set_device_state (udev, USB_STATE_CONFIGURED);
-                       udev->dev.power.power_state = PMSG_ON;
-                       status = hub_resume (udev
-                                       ->actconfig->interface[0]);
-               }
-       } else if (udev->state == USB_STATE_SUSPENDED) {
-               // NOTE this fails if parent is also suspended...
-               status = hub_port_resume(hdev_to_hub(udev->parent),
-                               port1, udev);
-       } else {
-               status = 0;
-       }
-       if (status < 0) {
+                       status = 0;
+       } else
+#endif
+               status = finish_device_resume(udev);
+       if (status < 0)
                dev_dbg(&udev->dev, "can't resume, status %d\n",
                        status);
-       }
 
        usb_unlock_device(udev);
 
@@ -1886,6 +1873,8 @@ static int remote_wakeup(struct usb_device *udev)
 {
        int     status = 0;
 
+#ifdef CONFIG_USB_SUSPEND
+
        /* don't repeat RESUME sequence if this device
         * was already woken up by some other task
         */
@@ -1894,9 +1883,10 @@ static int remote_wakeup(struct usb_device *udev)
                dev_dbg(&udev->dev, "RESUME (wakeup)\n");
                /* TRSMRCY = 10 msec */
                msleep(10);
-               status = finish_port_resume(udev);
+               status = finish_device_resume(udev);
        }
        up(&udev->serialize);
+#endif
        return status;
 }
 
@@ -1911,12 +1901,32 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
                struct usb_device       *udev;
 
                udev = hdev->children [port1-1];
-               if (udev && udev->state != USB_STATE_SUSPENDED) {
+               if (udev && (udev->dev.power.power_state.event
+                                       == PM_EVENT_ON
+#ifdef CONFIG_USB_SUSPEND
+                               || udev->state != USB_STATE_SUSPENDED
+#endif
+                               )) {
                        dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
                        return -EBUSY;
                }
        }
 
+       /* "global suspend" of the downstream HC-to-USB interface */
+       if (!hdev->parent) {
+               struct usb_bus  *bus = hdev->bus;
+               if (bus && bus->op->hub_suspend) {
+                       int     status = bus->op->hub_suspend (bus);
+
+                       if (status != 0) {
+                               dev_dbg(&hdev->dev, "'global' suspend %d\n",
+                                       status);
+                               return status;
+                       }
+               } else
+                       return -EOPNOTSUPP;
+       }
+
        /* stop khubd and related activity */
        hub_quiesce(hub);
        return 0;
@@ -1926,9 +1936,36 @@ static int hub_resume(struct usb_interface *intf)
 {
        struct usb_device       *hdev = interface_to_usbdev(intf);
        struct usb_hub          *hub = usb_get_intfdata (intf);
-       unsigned                port1;
        int                     status;
 
+       /* "global resume" of the downstream HC-to-USB interface */
+       if (!hdev->parent) {
+               struct usb_bus  *bus = hdev->bus;
+               if (bus && bus->op->hub_resume) {
+                       status = bus->op->hub_resume (bus);
+                       if (status) {
+                               dev_dbg(&intf->dev, "'global' resume %d\n",
+                                       status);
+                               return status;
+                       }
+               } else
+                       return -EOPNOTSUPP;
+               if (status == 0) {
+                       /* TRSMRCY = 10 msec */
+                       msleep(10);
+               }
+       }
+
+       hub_activate(hub);
+
+       /* REVISIT:  this recursion probably shouldn't exist.  Remove
+        * this code sometime, after retesting with different root and
+        * external hubs.
+        */
+#ifdef CONFIG_USB_SUSPEND
+       {
+       unsigned                port1;
+
        for (port1 = 1; port1 <= hdev->maxchild; port1++) {
                struct usb_device       *udev;
                u16                     portstat, portchange;
@@ -1953,7 +1990,7 @@ static int hub_resume(struct usb_interface *intf)
                if (portstat & USB_PORT_STAT_SUSPEND)
                        status = hub_port_resume(hub, port1, udev);
                else {
-                       status = finish_port_resume(udev);
+                       status = finish_device_resume(udev);
                        if (status < 0) {
                                dev_dbg(&intf->dev, "resume port %d --> %d\n",
                                        port1, status);
@@ -1962,8 +1999,8 @@ static int hub_resume(struct usb_interface *intf)
                }
                up(&udev->serialize);
        }
-       hub->resume_root_hub = 0;
-       hub_activate(hub);
+       }
+#endif
        return 0;
 }
 
@@ -1987,26 +2024,6 @@ void usb_resume_root_hub(struct usb_device *hdev)
        kick_khubd(hub);
 }
 
-#else  /* !CONFIG_USB_SUSPEND */
-
-int usb_suspend_device(struct usb_device *udev)
-{
-       /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */
-       return 0;
-}
-
-int usb_resume_device(struct usb_device *udev)
-{
-       udev->dev.power.power_state.event = PM_EVENT_ON;
-       return 0;
-}
-
-#define        hub_suspend             NULL
-#define        hub_resume              NULL
-#define        remote_wakeup(x)        0
-
-#endif /* CONFIG_USB_SUSPEND */
-
 EXPORT_SYMBOL(usb_suspend_device);
 EXPORT_SYMBOL(usb_resume_device);