spi-topcliff-pch: Fix overrun issue
authorTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Tue, 6 Sep 2011 08:16:38 +0000 (17:16 +0900)
committerGrant Likely <grant.likely@secretlab.ca>
Tue, 4 Oct 2011 16:10:50 +0000 (10:10 -0600)
We found that adding load, Rx data sometimes drops.(with DMA transfer mode)
The cause is that before starting Rx-DMA processing, Tx-DMA processing starts.
This causes FIFO overrun occurs.

This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor
size like below.

                      Current                   this patch
Rx-descriptor   4Byte+12Byte*341    -->    12Byte*340-4Byte-12Byte
Rx-threshold                   (Not modified)
Tx-descriptor   4Byte+12Byte*341    -->    16Byte-12Byte*340
Rx-threshold    12Byte              -->    2Byte

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
drivers/spi/spi-topcliff-pch.c

index c8efa757fdaa45ed65eda166913fb35dfb121bee..6a80749391dbaa4406b5069a27090522f92395ea 100644 (file)
@@ -50,6 +50,8 @@
 #define PCH_RX_THOLD           7
 #define PCH_RX_THOLD_MAX       15
 
+#define PCH_TX_THOLD           2
+
 #define PCH_MAX_BAUDRATE       5000000
 #define PCH_MAX_FIFO_DEPTH     16
 
@@ -1040,8 +1042,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
        /* set receive fifo threshold and transmit fifo threshold */
        pch_spi_setclr_reg(data->master, PCH_SPCR,
                           ((size - 1) << SPCR_RFIC_FIELD) |
-                          ((PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE) <<
-                           SPCR_TFIC_FIELD),
+                          (PCH_TX_THOLD << SPCR_TFIC_FIELD),
                           MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
 
        spin_unlock_irqrestore(&data->lock, flags);
@@ -1052,13 +1053,20 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
        /* offset, length setting */
        sg = dma->sg_rx_p;
        for (i = 0; i < num; i++, sg++) {
-               if (i == 0) {
-                       sg->offset = 0;
+               if (i == (num - 2)) {
+                       sg->offset = size * i;
+                       sg->offset = sg->offset * (*bpw / 8);
                        sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
                                    sg->offset);
                        sg_dma_len(sg) = rem;
+               } else if (i == (num - 1)) {
+                       sg->offset = size * (i - 1) + rem;
+                       sg->offset = sg->offset * (*bpw / 8);
+                       sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
+                                   sg->offset);
+                       sg_dma_len(sg) = size;
                } else {
-                       sg->offset = rem + size * (i - 1);
+                       sg->offset = size * i;
                        sg->offset = sg->offset * (*bpw / 8);
                        sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
                                    sg->offset);
@@ -1082,6 +1090,16 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
        dma->desc_rx = desc_rx;
 
        /* TX */
+       if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
+               num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+               size = PCH_DMA_TRANS_SIZE;
+               rem = 16;
+       } else {
+               num = 1;
+               size = data->bpw_len;
+               rem = data->bpw_len;
+       }
+
        dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
        sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
        /* offset, length setting */