[SCSI] mptfusion - prep for removing domain validation
authorMoore, Eric Dean <Eric.Moore@lsil.com>
Thu, 17 Nov 2005 01:54:23 +0000 (18:54 -0700)
committerJames Bottomley <jejb@mulgrave.(none)>
Wed, 14 Dec 2005 01:40:52 +0000 (18:40 -0700)
This moves some functions around from within the #define
MPTSCSIH_ENABLE_DOMAIN_VALIDATION area, in preperation for generic
domain validation.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/message/fusion/mptscsih.c

index 2d014248b799bb72a470256546753fce3283c3db..a5ca7494c8c1b668d82fd575ee2c3e94a972c5dd 100644 (file)
@@ -152,7 +152,6 @@ int         mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply
 
 static void    mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen);
 static void    mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56);
-static void    mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
 static void    mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags);
 static void    mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id);
 static int     mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags);
@@ -160,18 +159,19 @@ static int        mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus);
 int            mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
 static int     mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
 static int     mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum);
+static int     mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
 
 static struct work_struct   mptscsih_persistTask;
 
 #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
 static int     mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
 static void    mptscsih_domainValidation(void *hd);
-static int     mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
 static void    mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
 static int     mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
 static void    mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
 static void    mptscsih_fillbuf(char *buffer, int size, int index, int width);
 static void    mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
+static void    mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
 #endif
 
 void           mptscsih_remove(struct pci_dev *);
@@ -993,8 +993,10 @@ mptscsih_remove(struct pci_dev *pdev)
        MPT_ADAPTER             *ioc = pci_get_drvdata(pdev);
        struct Scsi_Host        *host = ioc->sh;
        MPT_SCSI_HOST           *hd;
+#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
        int                     count;
        unsigned long           flags;
+#endif
        int sz1;
 
        if(!host) {
@@ -2597,9 +2599,9 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 
        case MPI_EVENT_INTEGRATED_RAID:                 /* 0B */
        {
+#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
                pMpiEventDataRaid_t pRaidEventData =
                    (pMpiEventDataRaid_t) pEvReply->Data;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
                /* Domain Validation Needed */
                if (ioc->bus_type == SPI &&
                    pRaidEventData->ReasonCode ==
@@ -2925,94 +2927,6 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56)
        }
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
- * Else set the NEED_DV flag after Read Capacity Issued (disks)
- * or Mode Sense (cdroms).
- *
- * Tapes, initTarget will set this flag on completion of Inquiry command.
- * Called only if DV_NOT_DONE flag is set
- */
-static void
-mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
-{
-       MPT_ADAPTER     *ioc = hd->ioc;
-       u8 cmd;
-       SpiCfgData      *pSpi;
-
-       ddvtprintk((MYIOC_s_NOTE_FMT
-               " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
-               hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
-
-       if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
-               return;
-
-       cmd = pReq->CDB[0];
-
-       if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
-               pSpi = &ioc->spi_data;
-               if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
-                       /* Set NEED_DV for all hidden disks
-                        */
-                       Ioc3PhysDisk_t *pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
-                       int             numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
-                       while (numPDisk) {
-                               pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
-                               ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
-                               pPDisk++;
-                               numPDisk--;
-                       }
-               }
-               pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV;
-               ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID));
-       }
-}
-
-/* mptscsih_raid_set_dv_flags()
- *
- * New or replaced disk. Set DV flag and schedule DV.
- */
-static void
-mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
-{
-       MPT_ADAPTER     *ioc = hd->ioc;
-       SpiCfgData      *pSpi = &ioc->spi_data;
-       Ioc3PhysDisk_t  *pPDisk;
-       int              numPDisk;
-
-       if (hd->negoNvram != 0)
-               return;
-
-       ddvtprintk(("DV requested for phys disk id %d\n", id));
-       if (ioc->raid_data.pIocPg3) {
-               pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
-               numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-               while (numPDisk) {
-                       if (id == pPDisk->PhysDiskNum) {
-                               pSpi->dvStatus[pPDisk->PhysDiskID] =
-                                   (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
-                               pSpi->forceDv = MPT_SCSICFG_NEED_DV;
-                               ddvtprintk(("NEED_DV set for phys disk id %d\n",
-                                   pPDisk->PhysDiskID));
-                               break;
-                       }
-                       pPDisk++;
-                       numPDisk--;
-               }
-
-               if (numPDisk == 0) {
-                       /* The physical disk that needs DV was not found
-                        * in the stored IOC Page 3. The driver must reload
-                        * this page. DV routine will set the NEED_DV flag for
-                        * all phys disks that have DV_NOT_DONE set.
-                        */
-                       pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
-                       ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
-               }
-       }
-}
-
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  * If no Target, bus reset on 1st I/O. Set the flag to
@@ -4052,6 +3966,26 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
        return 0;
 }
 
+/* Search IOC page 3 to determine if this is hidden physical disk
+ */
+/* Search IOC page 3 to determine if this is hidden physical disk
+ */
+static int
+mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
+{
+       int i;
+
+       if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
+               return 0;
+
+       for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+               if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
+                       return 1;
+       }
+
+       return 0;
+}
+
 #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -4205,26 +4139,6 @@ mptscsih_domainValidation(void *arg)
        return;
 }
 
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-static int
-mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
-{
-       int i;
-
-       if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
-               return 0;
-
-       for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
-               if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
-                       return 1;
-       }
-
-       return 0;
-}
-
 /* Write SDP1 if no QAS has been enabled
  */
 static void
@@ -5588,6 +5502,95 @@ mptscsih_fillbuf(char *buffer, int size, int index, int width)
                break;
        }
 }
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
+ * Else set the NEED_DV flag after Read Capacity Issued (disks)
+ * or Mode Sense (cdroms).
+ *
+ * Tapes, initTarget will set this flag on completion of Inquiry command.
+ * Called only if DV_NOT_DONE flag is set
+ */
+static void
+mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
+{
+       MPT_ADAPTER     *ioc = hd->ioc;
+       u8 cmd;
+       SpiCfgData      *pSpi;
+
+       ddvtprintk((MYIOC_s_NOTE_FMT
+               " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
+               hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
+
+       if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
+               return;
+
+       cmd = pReq->CDB[0];
+
+       if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
+               pSpi = &ioc->spi_data;
+               if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
+                       /* Set NEED_DV for all hidden disks
+                        */
+                       Ioc3PhysDisk_t *pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
+                       int             numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
+
+                       while (numPDisk) {
+                               pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
+                               ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
+                               pPDisk++;
+                               numPDisk--;
+                       }
+               }
+               pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV;
+               ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID));
+       }
+}
+
+/* mptscsih_raid_set_dv_flags()
+ *
+ * New or replaced disk. Set DV flag and schedule DV.
+ */
+static void
+mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
+{
+       MPT_ADAPTER     *ioc = hd->ioc;
+       SpiCfgData      *pSpi = &ioc->spi_data;
+       Ioc3PhysDisk_t  *pPDisk;
+       int              numPDisk;
+
+       if (hd->negoNvram != 0)
+               return;
+
+       ddvtprintk(("DV requested for phys disk id %d\n", id));
+       if (ioc->raid_data.pIocPg3) {
+               pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
+               numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
+               while (numPDisk) {
+                       if (id == pPDisk->PhysDiskNum) {
+                               pSpi->dvStatus[pPDisk->PhysDiskID] =
+                                   (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
+                               pSpi->forceDv = MPT_SCSICFG_NEED_DV;
+                               ddvtprintk(("NEED_DV set for phys disk id %d\n",
+                                   pPDisk->PhysDiskID));
+                               break;
+                       }
+                       pPDisk++;
+                       numPDisk--;
+               }
+
+               if (numPDisk == 0) {
+                       /* The physical disk that needs DV was not found
+                        * in the stored IOC Page 3. The driver must reload
+                        * this page. DV routine will set the NEED_DV flag for
+                        * all phys disks that have DV_NOT_DONE set.
+                        */
+                       pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
+                       ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
+               }
+       }
+}
+
 #endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
 
 EXPORT_SYMBOL(mptscsih_remove);