qlge: Restore promiscuous setting after reset.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index bfb8b327f2fd8d8a8ed8ec9f3e5a0551f0f6fb7f..01b0634a0b541fbf068bf0c11f0a9c278b2500b0 100644 (file)
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2246,6 +2246,7 @@ netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev);
 void ql_check_lb_frame(struct ql_adapter *, struct sk_buff *);
 int ql_own_firmware(struct ql_adapter *qdev);
 int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget);
+void qlge_set_multicast_list(struct net_device *ndev);
 
 #if 1
 #define QL_ALL_DUMP

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index fa4b24c49f42875bfad43015a9db6ab089b2add8..e99c2c634c859344503d75b042b90306535012ca 100644 (file)
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3919,6 +3919,11 @@ static int ql_adapter_up(struct ql_adapter *qdev)
        if ((ql_read32(qdev, STS) & qdev->port_init) &&
                        (ql_read32(qdev, STS) & qdev->port_link_up))
                ql_link_on(qdev);
+       /* Restore rx mode. */
+       clear_bit(QL_ALLMULTI, &qdev->flags);
+       clear_bit(QL_PROMISCUOUS, &qdev->flags);
+       qlge_set_multicast_list(qdev->ndev);
+
        ql_enable_interrupts(qdev);
        ql_enable_all_completion_interrupts(qdev);
        netif_tx_start_all_queues(qdev->ndev);
@@ -4204,7 +4209,7 @@ static struct net_device_stats *qlge_get_stats(struct net_device
        return &ndev->stats;
 }
 
-static void qlge_set_multicast_list(struct net_device *ndev)
+void qlge_set_multicast_list(struct net_device *ndev)
 {
        struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
        struct netdev_hw_addr *ha;