Staging: wlan-ng: Change KERN_DEBUG or pr_debug to match orig driver
authorKarl Relton <karllinuxtest.relton@ntlworld.com>
Fri, 8 May 2009 19:54:17 +0000 (20:54 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 19 Jun 2009 18:00:38 +0000 (11:00 -0700)
Change uses of KERN_DEBUG over to pr_debug to match original driver
where messages are only needed during driver development.

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/wlan-ng/hfa384x_usb.c
drivers/staging/wlan-ng/p80211conv.c
drivers/staging/wlan-ng/p80211wext.c
drivers/staging/wlan-ng/prism2mgmt.c
drivers/staging/wlan-ng/prism2sta.c

index 6790bc5efe5b9684260ee7808d15df6724dd034d..be297b9cac3e8434227257025b13fbc91f62000a 100644 (file)
@@ -1174,7 +1174,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
        int result = 0;
        hfa384x_metacmd_t cmd;
 
-       printk(KERN_DEBUG
+       pr_debug(
               "mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
               mode, lowaddr, highaddr, codelen);
 
@@ -1651,7 +1651,7 @@ hfa384x_dormem(hfa384x_t *hw,
 
        ctlx->outbufsize = sizeof(ctlx->outbuf.rmemreq);
 
-       printk(KERN_DEBUG
+       pr_debug(
               "type=0x%04x frmlen=%d offset=0x%04x page=0x%04x\n",
               ctlx->outbuf.rmemreq.type,
               ctlx->outbuf.rmemreq.frmlen,
@@ -2035,7 +2035,7 @@ int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
        /* NOTE: dlbuffer RID stores the address in AUX format */
        dlbufaddr =
            HFA384x_ADDR_AUX_MKFLAT(hw->bufinfo.page, hw->bufinfo.offset);
-       printk(KERN_DEBUG
+       pr_debug(
               "dlbuf.page=0x%04x dlbuf.offset=0x%04x dlbufaddr=0x%08x\n",
               hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr);
 
@@ -2323,7 +2323,7 @@ int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, u32 exeaddr)
                /* Set the download state */
                hw->dlstate = HFA384x_DLSTATE_RAMENABLED;
        } else {
-               printk(KERN_DEBUG
+               pr_debug(
                       "cmd_download(0x%04x, 0x%04x) failed, result=%d.\n",
                       lowaddr, hiaddr, result);
        }
@@ -2629,10 +2629,10 @@ int hfa384x_drvr_start(hfa384x_t *hw)
                        usb_kill_urb(&hw->rx_urb);
                        goto done;
                } else {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "First cmd_initialize() failed (result %d),\n",
                               result1);
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "but second attempt succeeded. All should be ok\n");
                }
        } else if (result2 != 0) {
@@ -3301,7 +3301,7 @@ static void hfa384x_usbin_callback(struct urb *urb)
                break;
 
        default:
-               printk(KERN_DEBUG
+               pr_debug(
                       "Unrecognized USBIN packet, type=%x, status=%d\n",
                       usbin->type, urb_status);
                break;
@@ -3399,7 +3399,7 @@ retry:
                         * our request has been acknowledged. Odd,
                         * but our OUT URB is still alive...
                         */
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "Causality violation: please reboot Universe, or email linux-wlan-devel@lists.linux-wlan.com\n");
                        ctlx->state = CTLX_RESP_COMPLETE;
                        break;
@@ -3552,7 +3552,7 @@ static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb)
                        hfa384x_int_rxmonitor(wlandev, &usbin->rxfrm);
                        dev_kfree_skb(skb);
                } else {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "Received monitor frame: FCSerr set\n");
                }
                break;
@@ -4171,13 +4171,13 @@ static int hfa384x_isgood_pdrcode(u16 pdrcode)
        default:
                if (pdrcode < 0x1000) {
                        /* code is OK, but we don't know exactly what it is */
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "Encountered unknown PDR#=0x%04x, "
                               "assuming it's ok.\n", pdrcode);
                        return 1;
                } else {
                        /* bad code */
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "Encountered unknown PDR#=0x%04x, "
                               "(>=0x1000), assuming it's bad.\n", pdrcode);
                        return 0;
index 2abce0c3444435c927217de990553ad15ecd4ce5..44266b8618c92a1a2aa5195c1e451d8807d712aa 100644 (file)
@@ -329,7 +329,7 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
                                       skb->data + payload_offset +
                                       payload_length - 4))) {
                        /* de-wep failed, drop skb. */
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "Host de-WEP failed, dropping frame (%d).\n",
                               foo);
                        wlandev->rx.decrypt_err++;
index 96078b0ea6aae6f6e1103b14c9f1da956c2f1068..3a96fce7c22e5f6f384f569058ac1c90fd896e85 100644 (file)
@@ -1561,7 +1561,7 @@ static int p80211wext_get_encodeext(struct net_device *dev,
 
        if (idx) {
                if (idx < 1 || idx > NUM_WEPKEYS) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "get_encode_ext invalid key index [%d]\n", idx);
                        result = -EINVAL;
                        goto exit;
index e7a7939b42802f80aa1a093ea624a5096b70d637..d2e5fccb629fe796b33a575be8893ac5a8f84dbd 100644 (file)
@@ -1096,7 +1096,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                /* Disable monitor mode */
                result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "failed to disable monitor mode, result=%d\n",
                               result);
                        goto failed;
@@ -1104,7 +1104,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                /* Disable port 0 */
                result = hfa384x_drvr_disable(hw, 0);
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "failed to disable port 0 after sniffing, result=%d\n",
                               result);
                        goto failed;
@@ -1117,7 +1117,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                                  HFA384x_RID_CNFWEPFLAGS,
                                                  hw->presniff_wepflags);
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "failed to restore wepflags=0x%04x, result=%d\n",
                               hw->presniff_wepflags, result);
                        goto failed;
@@ -1130,7 +1130,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                                          HFA384x_RID_CNFPORTTYPE,
                                                          word);
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "failed to restore porttype, result=%d\n",
                                       result);
                                goto failed;
@@ -1139,7 +1139,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                        /* Enable the port */
                        result = hfa384x_drvr_enable(hw, 0);
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "failed to enable port to presniff setting, result=%d\n",
                                       result);
                                goto failed;
@@ -1164,7 +1164,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                                                  &(hw->
                                                                    presniff_port_type));
                                if (result) {
-                                       printk(KERN_DEBUG
+                                       pr_debug(
                                               "failed to read porttype, result=%d\n",
                                               result);
                                        goto failed;
@@ -1175,7 +1175,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                                                  &(hw->
                                                                    presniff_wepflags));
                                if (result) {
-                                       printk(KERN_DEBUG
+                                       pr_debug(
                                               "failed to read wepflags, result=%d\n",
                                               result);
                                        goto failed;
@@ -1183,7 +1183,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                hfa384x_drvr_stop(hw);
                                result = hfa384x_drvr_start(hw);
                                if (result) {
-                                       printk(KERN_DEBUG
+                                       pr_debug(
                                               "failed to restart the card for sniffing, result=%d\n",
                                               result);
                                        goto failed;
@@ -1192,7 +1192,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                /* Disable the port */
                                result = hfa384x_drvr_disable(hw, 0);
                                if (result) {
-                                       printk(KERN_DEBUG
+                                       pr_debug(
                                               "failed to enable port for sniffing, result=%d\n",
                                               result);
                                        goto failed;
@@ -1210,7 +1210,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                hw->sniff_channel = word;
 
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "failed to set channel %d, result=%d\n",
                               word, result);
                        goto failed;
@@ -1224,7 +1224,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                                                          HFA384x_RID_CNFPORTTYPE,
                                                          word);
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "failed to set porttype %d, result=%d\n",
                                       word, result);
                                goto failed;
@@ -1243,7 +1243,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                        }
 
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "failed to set wepflags=0x%04x, result=%d\n",
                                       word, result);
                                goto failed;
@@ -1269,7 +1269,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                /* Enable the port */
                result = hfa384x_drvr_enable(hw, 0);
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "failed to enable port for sniffing, result=%d\n",
                               result);
                        goto failed;
@@ -1277,7 +1277,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
                /* Enable monitor mode */
                result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "failed to enable monitor mode, result=%d\n",
                               result);
                        goto failed;
index 9d57f82f4a25dba74338080825af39a128cdb08c..573e93ae7d42567ac1ebf93582a4a7c147d3b91b 100644 (file)
@@ -1188,7 +1188,7 @@ static void prism2sta_inf_chinforesults(wlandevice_t *wlandev,
                        chinforesult->active =
                            le16_to_cpu(inf->info.chinforesult.result[n].
                                            active);
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
                               channel + 1,
                               chinforesult->
@@ -1276,7 +1276,7 @@ void prism2sta_processing_defer(struct work_struct *data)
                                                        wlandev->bssid,
                                                        WLAN_BSSID_LEN);
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "getconfig(0x%02x) failed, result = %d\n",
                                       HFA384x_RID_CURRENTBSSID, result);
                                goto failed;
@@ -1286,7 +1286,7 @@ void prism2sta_processing_defer(struct work_struct *data)
                                                        HFA384x_RID_CURRENTSSID,
                                                        &ssid, sizeof(ssid));
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "getconfig(0x%02x) failed, result = %d\n",
                                       HFA384x_RID_CURRENTSSID, result);
                                goto failed;
@@ -1300,7 +1300,7 @@ void prism2sta_processing_defer(struct work_struct *data)
                                                          HFA384x_RID_PORTSTATUS,
                                                          &portstatus);
                        if (result) {
-                               printk(KERN_DEBUG
+                               pr_debug(
                                       "getconfig(0x%02x) failed, result = %d\n",
                                       HFA384x_RID_PORTSTATUS, result);
                                goto failed;
@@ -1366,7 +1366,7 @@ void prism2sta_processing_defer(struct work_struct *data)
                                                HFA384x_RID_CURRENTBSSID,
                                                wlandev->bssid, WLAN_BSSID_LEN);
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "getconfig(0x%02x) failed, result = %d\n",
                               HFA384x_RID_CURRENTBSSID, result);
                        goto failed;
@@ -1376,7 +1376,7 @@ void prism2sta_processing_defer(struct work_struct *data)
                                                HFA384x_RID_CURRENTSSID,
                                                &ssid, sizeof(ssid));
                if (result) {
-                       printk(KERN_DEBUG
+                       pr_debug(
                               "getconfig(0x%02x) failed, result = %d\n",
                               HFA384x_RID_CURRENTSSID, result);
                        goto failed;
@@ -2030,7 +2030,7 @@ void prism2sta_commsqual_defer(struct work_struct *data)
                                        HFA384x_RID_CURRENTBSSID,
                                        wlandev->bssid, WLAN_BSSID_LEN);
        if (result) {
-               printk(KERN_DEBUG
+               pr_debug(
                       "getconfig(0x%02x) failed, result = %d\n",
                       HFA384x_RID_CURRENTBSSID, result);
                goto done;
@@ -2040,7 +2040,7 @@ void prism2sta_commsqual_defer(struct work_struct *data)
                                        HFA384x_RID_CURRENTSSID,
                                        &ssid, sizeof(ssid));
        if (result) {
-               printk(KERN_DEBUG
+               pr_debug(
                       "getconfig(0x%02x) failed, result = %d\n",
                       HFA384x_RID_CURRENTSSID, result);
                goto done;