net: phy: marvell: Limit errata to 88m1101
authorAndrew Lunn <andrew@lunn.ch>
Tue, 23 May 2017 15:49:13 +0000 (17:49 +0200)
committerDavid S. Miller <davem@davemloft.net>
Wed, 24 May 2017 19:49:08 +0000 (15:49 -0400)
The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.

Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker <danielwa@cisco.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/marvell.c

index 272b051a019975110aa1d117da993cf18cb98816..9097e42bec2e42d8ee864edea4a6be5d8c0a92cc 100644 (file)
@@ -255,34 +255,6 @@ static int marvell_config_aneg(struct phy_device *phydev)
 {
        int err;
 
-       /* The Marvell PHY has an errata which requires
-        * that certain registers get written in order
-        * to restart autonegotiation */
-       err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
-       if (err < 0)
-               return err;
-
-       err = phy_write(phydev, 0x1d, 0x1f);
-       if (err < 0)
-               return err;
-
-       err = phy_write(phydev, 0x1e, 0x200c);
-       if (err < 0)
-               return err;
-
-       err = phy_write(phydev, 0x1d, 0x5);
-       if (err < 0)
-               return err;
-
-       err = phy_write(phydev, 0x1e, 0);
-       if (err < 0)
-               return err;
-
-       err = phy_write(phydev, 0x1e, 0x100);
-       if (err < 0)
-               return err;
-
        err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
        if (err < 0)
                return err;
@@ -316,6 +288,42 @@ static int marvell_config_aneg(struct phy_device *phydev)
        return 0;
 }
 
+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+       int err;
+
+       /* This Marvell PHY has an errata which requires
+        * that certain registers get written in order
+        * to restart autonegotiation
+        */
+       err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, 0x1d, 0x1f);
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, 0x1e, 0x200c);
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, 0x1d, 0x5);
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, 0x1e, 0);
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, 0x1e, 0x100);
+       if (err < 0)
+               return err;
+
+       return marvell_config_aneg(phydev);
+}
+
 static int m88e1111_config_aneg(struct phy_device *phydev)
 {
        int err;
@@ -1892,7 +1900,7 @@ static struct phy_driver marvell_drivers[] = {
                .flags = PHY_HAS_INTERRUPT,
                .probe = marvell_probe,
                .config_init = &marvell_config_init,
-               .config_aneg = &marvell_config_aneg,
+               .config_aneg = &m88e1101_config_aneg,
                .read_status = &genphy_read_status,
                .ack_interrupt = &marvell_ack_interrupt,
                .config_intr = &marvell_config_intr,