extra-$(CONFIG_PPC_FPU) += fpu.o
extra-y += vmlinux.lds
-obj-y += process.o init_task.o \
+obj-y += process.o init_task.o time.o \
prom.o systbl.o traps.o
obj-$(CONFIG_PPC32) += entry_32.o idle_6xx.o setup_32.o misc_32.o
obj-$(CONFIG_PPC64) += setup_64.o misc_64.o
else
# stuff used from here for ARCH=ppc or ARCH=ppc64
-obj-$(CONFIG_PPC64) += traps.o process.o init_task.o
+obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o
fpux-$(CONFIG_PPC32) += fpu.o
extra-$(CONFIG_PPC_FPU) += $(fpux-y)
1: bdnz 1b
blr
+/*
+ * This returns the high 64 bits of the product of two 64-bit numbers.
+ */
+_GLOBAL(mulhdu)
+ cmpwi r6,0
+ cmpwi cr1,r3,0
+ mr r10,r4
+ mulhwu r4,r4,r5
+ beq 1f
+ mulhwu r0,r10,r6
+ mullw r7,r10,r5
+ addc r7,r0,r7
+ addze r4,r4
+1: beqlr cr1 /* all done if high part of A is 0 */
+ mr r10,r3
+ mullw r9,r3,r5
+ mulhwu r3,r3,r5
+ beq 2f
+ mullw r0,r10,r6
+ mulhwu r8,r10,r6
+ addc r7,r0,r7
+ adde r4,r4,r8
+ addze r3,r3
+2: addc r4,r4,r9
+ addze r3,r3
+ blr
+
/*
* Returns (address we're running at) - (address we were linked at)
* for use before the text and data are mapped to KERNELBASE.
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL(disarm_decr);
#endif
#ifdef CONFIG_PPC_STD_MMU_32
printk("[terminate]%04x %s\n", src, msg);
}
-/* This should only be called on processor 0 during calibrate decr */
-void __init setup_default_decr(void)
-{
- struct paca_struct *lpaca = get_paca();
-
- lpaca->default_decr = tb_ticks_per_jiffy;
- lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
-}
-
#ifndef CONFIG_PPC_ISERIES
/*
* This function can be used by platforms to "find" legacy serial ports.
--- /dev/null
+/*
+ * Common time routines among all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
+ * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com)
+ *
+ * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
+ * to make clock more stable (2.4.0-test5). The only thing
+ * that this code assumes is that the timebases have been synchronized
+ * by firmware on SMP and are never stopped (never do sleep
+ * on SMP then, nap and doze are OK).
+ *
+ * Speeded up do_gettimeofday by getting rid of references to
+ * xtime (which required locks for consistency). (mikejc@us.ibm.com)
+ *
+ * TODO (not necessarily in this file):
+ * - improve precision and reproducibility of timebase frequency
+ * measurement at boot time. (for iSeries, we calibrate the timebase
+ * against the Titan chip's clock.)
+ * - for astronomical applications: add a new function to get
+ * non ambiguous timestamps even around leap seconds. This needs
+ * a new timestamp format and a good name.
+ *
+ * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
+ * "A Kernel Model for Precision Timekeeping" by Dave Mills
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/kernel_stat.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/cpu.h>
+#include <linux/security.h>
+#include <linux/percpu.h>
+#include <linux/rtc.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/nvram.h>
+#include <asm/cache.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#ifdef CONFIG_PPC64
+#include <asm/systemcfg.h>
+#include <asm/firmware.h>
+#endif
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/iSeries/ItLpQueue.h>
+#include <asm/iSeries/HvCallXm.h>
+#endif
+
+u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+/* keep track of when we need to update the rtc */
+time_t last_rtc_update;
+extern int piranha_simulator;
+#ifdef CONFIG_PPC_ISERIES
+unsigned long iSeries_recal_titan = 0;
+unsigned long iSeries_recal_tb = 0;
+static unsigned long first_settimeofday = 1;
+#endif
+
+/* The decrementer counts down by 128 every 128ns on a 601. */
+#define DECREMENTER_COUNT_601 (1000000000 / HZ)
+
+#define XSEC_PER_SEC (1024*1024)
+
+#ifdef CONFIG_PPC64
+#define SCALE_XSEC(xsec, max) (((xsec) * max) / XSEC_PER_SEC)
+#else
+/* compute ((xsec << 12) * max) >> 32 */
+#define SCALE_XSEC(xsec, max) mulhwu((xsec) << 12, max)
+#endif
+
+unsigned long tb_ticks_per_jiffy;
+unsigned long tb_ticks_per_usec = 100; /* sane default */
+EXPORT_SYMBOL(tb_ticks_per_usec);
+unsigned long tb_ticks_per_sec;
+u64 tb_to_xs;
+unsigned tb_to_us;
+unsigned long processor_freq;
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL_GPL(rtc_lock);
+
+u64 tb_to_ns_scale;
+unsigned tb_to_ns_shift;
+
+struct gettimeofday_struct do_gtod;
+
+extern unsigned long wall_jiffies;
+
+extern struct timezone sys_tz;
+static long timezone_offset;
+
+void ppc_adjtimex(void);
+
+static unsigned adjusting_time = 0;
+
+unsigned long ppc_proc_freq;
+unsigned long ppc_tb_freq;
+
+#ifdef CONFIG_PPC32 /* XXX for now */
+#define boot_cpuid 0
+#endif
+
+static __inline__ void timer_check_rtc(void)
+{
+ /*
+ * update the rtc when needed, this should be performed on the
+ * right fraction of a second. Half or full second ?
+ * Full second works on mk48t59 clocks, others need testing.
+ * Note that this update is basically only used through
+ * the adjtimex system calls. Setting the HW clock in
+ * any other way is a /dev/rtc and userland business.
+ * This is still wrong by -0.5/+1.5 jiffies because of the
+ * timer interrupt resolution and possible delay, but here we
+ * hit a quantization limit which can only be solved by higher
+ * resolution timers and decoupling time management from timer
+ * interrupts. This is also wrong on the clocks
+ * which require being written at the half second boundary.
+ * We should have an rtc call that only sets the minutes and
+ * seconds like on Intel to avoid problems with non UTC clocks.
+ */
+ if (ntp_synced() &&
+ xtime.tv_sec - last_rtc_update >= 659 &&
+ abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
+ jiffies - wall_jiffies == 1) {
+ struct rtc_time tm;
+ to_tm(xtime.tv_sec + 1 + timezone_offset, &tm);
+ tm.tm_year -= 1900;
+ tm.tm_mon -= 1;
+ if (ppc_md.set_rtc_time(&tm) == 0)
+ last_rtc_update = xtime.tv_sec + 1;
+ else
+ /* Try again one minute later */
+ last_rtc_update += 60;
+ }
+}
+
+/*
+ * This version of gettimeofday has microsecond resolution.
+ */
+static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
+{
+ unsigned long sec, usec;
+ u64 tb_ticks, xsec;
+ struct gettimeofday_vars *temp_varp;
+ u64 temp_tb_to_xs, temp_stamp_xsec;
+
+ /*
+ * These calculations are faster (gets rid of divides)
+ * if done in units of 1/2^20 rather than microseconds.
+ * The conversion to microseconds at the end is done
+ * without a divide (and in fact, without a multiply)
+ */
+ temp_varp = do_gtod.varp;
+ tb_ticks = tb_val - temp_varp->tb_orig_stamp;
+ temp_tb_to_xs = temp_varp->tb_to_xs;
+ temp_stamp_xsec = temp_varp->stamp_xsec;
+ xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
+ sec = xsec / XSEC_PER_SEC;
+ usec = (unsigned long)xsec & (XSEC_PER_SEC - 1);
+ usec = SCALE_XSEC(usec, 1000000);
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ __do_gettimeofday(tv, get_tb());
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+/* Synchronize xtime with do_gettimeofday */
+
+static inline void timer_sync_xtime(unsigned long cur_tb)
+{
+#ifdef CONFIG_PPC64
+ /* why do we do this? */
+ struct timeval my_tv;
+
+ __do_gettimeofday(&my_tv, cur_tb);
+
+ if (xtime.tv_sec <= my_tv.tv_sec) {
+ xtime.tv_sec = my_tv.tv_sec;
+ xtime.tv_nsec = my_tv.tv_usec * 1000;
+ }
+#endif
+}
+
+/*
+ * There are two copies of tb_to_xs and stamp_xsec so that no
+ * lock is needed to access and use these values in
+ * do_gettimeofday. We alternate the copies and as long as a
+ * reasonable time elapses between changes, there will never
+ * be inconsistent values. ntpd has a minimum of one minute
+ * between updates.
+ */
+static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
+ unsigned int new_tb_to_xs)
+{
+ unsigned temp_idx;
+ struct gettimeofday_vars *temp_varp;
+
+ temp_idx = (do_gtod.var_idx == 0);
+ temp_varp = &do_gtod.vars[temp_idx];
+
+ temp_varp->tb_to_xs = new_tb_to_xs;
+ temp_varp->tb_orig_stamp = new_tb_stamp;
+ temp_varp->stamp_xsec = new_stamp_xsec;
+ smp_mb();
+ do_gtod.varp = temp_varp;
+ do_gtod.var_idx = temp_idx;
+
+#ifdef CONFIG_PPC64
+ /*
+ * tb_update_count is used to allow the userspace gettimeofday code
+ * to assure itself that it sees a consistent view of the tb_to_xs and
+ * stamp_xsec variables. It reads the tb_update_count, then reads
+ * tb_to_xs and stamp_xsec and then reads tb_update_count again. If
+ * the two values of tb_update_count match and are even then the
+ * tb_to_xs and stamp_xsec values are consistent. If not, then it
+ * loops back and reads them again until this criteria is met.
+ */
+ ++(systemcfg->tb_update_count);
+ smp_wmb();
+ systemcfg->tb_orig_stamp = new_tb_stamp;
+ systemcfg->stamp_xsec = new_stamp_xsec;
+ systemcfg->tb_to_xs = new_tb_to_xs;
+ smp_wmb();
+ ++(systemcfg->tb_update_count);
+#endif
+}
+
+/*
+ * When the timebase - tb_orig_stamp gets too big, we do a manipulation
+ * between tb_orig_stamp and stamp_xsec. The goal here is to keep the
+ * difference tb - tb_orig_stamp small enough to always fit inside a
+ * 32 bits number. This is a requirement of our fast 32 bits userland
+ * implementation in the vdso. If we "miss" a call to this function
+ * (interrupt latency, CPU locked in a spinlock, ...) and we end up
+ * with a too big difference, then the vdso will fallback to calling
+ * the syscall
+ */
+static __inline__ void timer_recalc_offset(u64 cur_tb)
+{
+ unsigned long offset;
+ u64 new_stamp_xsec;
+
+ offset = cur_tb - do_gtod.varp->tb_orig_stamp;
+ if ((offset & 0x80000000u) == 0)
+ return;
+ new_stamp_xsec = do_gtod.varp->stamp_xsec
+ + mulhdu(offset, do_gtod.varp->tb_to_xs);
+ update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs);
+}
+
+#ifdef CONFIG_SMP
+unsigned long profile_pc(struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ if (in_lock_functions(pc))
+ return regs->link;
+
+ return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+#endif
+
+#ifdef CONFIG_PPC_ISERIES
+
+/*
+ * This function recalibrates the timebase based on the 49-bit time-of-day
+ * value in the Titan chip. The Titan is much more accurate than the value
+ * returned by the service processor for the timebase frequency.
+ */
+
+static void iSeries_tb_recal(void)
+{
+ struct div_result divres;
+ unsigned long titan, tb;
+ tb = get_tb();
+ titan = HvCallXm_loadTod();
+ if ( iSeries_recal_titan ) {
+ unsigned long tb_ticks = tb - iSeries_recal_tb;
+ unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
+ unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec;
+ unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
+ long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
+ char sign = '+';
+ /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
+ new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ;
+
+ if ( tick_diff < 0 ) {
+ tick_diff = -tick_diff;
+ sign = '-';
+ }
+ if ( tick_diff ) {
+ if ( tick_diff < tb_ticks_per_jiffy/25 ) {
+ printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n",
+ new_tb_ticks_per_jiffy, sign, tick_diff );
+ tb_ticks_per_jiffy = new_tb_ticks_per_jiffy;
+ tb_ticks_per_sec = new_tb_ticks_per_sec;
+ div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
+ do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
+ tb_to_xs = divres.result_low;
+ do_gtod.varp->tb_to_xs = tb_to_xs;
+ systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
+ systemcfg->tb_to_xs = tb_to_xs;
+ }
+ else {
+ printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
+ " new tb_ticks_per_jiffy = %lu\n"
+ " old tb_ticks_per_jiffy = %lu\n",
+ new_tb_ticks_per_jiffy, tb_ticks_per_jiffy );
+ }
+ }
+ }
+ iSeries_recal_titan = titan;
+ iSeries_recal_tb = tb;
+}
+#endif
+
+/*
+ * For iSeries shared processors, we have to let the hypervisor
+ * set the hardware decrementer. We set a virtual decrementer
+ * in the lppaca and call the hypervisor if the virtual
+ * decrementer is less than the current value in the hardware
+ * decrementer. (almost always the new decrementer value will
+ * be greater than the current hardware decementer so the hypervisor
+ * call will not be needed)
+ */
+
+u64 tb_last_stamp __cacheline_aligned_in_smp;
+
+/*
+ * Note that on ppc32 this only stores the bottom 32 bits of
+ * the timebase value, but that's enough to tell when a jiffy
+ * has passed.
+ */
+DEFINE_PER_CPU(unsigned long, last_jiffy);
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ */
+void timer_interrupt(struct pt_regs * regs)
+{
+ int next_dec;
+ int cpu = smp_processor_id();
+ unsigned long ticks;
+
+#ifdef CONFIG_PPC32
+ if (atomic_read(&ppc_n_lost_interrupts) != 0)
+ do_IRQ(regs);
+#endif
+
+ irq_enter();
+
+ profile_tick(CPU_PROFILING, regs);
+
+#ifdef CONFIG_PPC_ISERIES
+ get_paca()->lppaca.int_dword.fields.decr_int = 0;
+#endif
+
+ while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu)))
+ >= tb_ticks_per_jiffy) {
+ /* Update last_jiffy */
+ per_cpu(last_jiffy, cpu) += tb_ticks_per_jiffy;
+ /* Handle RTCL overflow on 601 */
+ if (__USE_RTC() && per_cpu(last_jiffy, cpu) >= 1000000000)
+ per_cpu(last_jiffy, cpu) -= 1000000000;
+
+ /*
+ * We cannot disable the decrementer, so in the period
+ * between this cpu's being marked offline in cpu_online_map
+ * and calling stop-self, it is taking timer interrupts.
+ * Avoid calling into the scheduler rebalancing code if this
+ * is the case.
+ */
+ if (!cpu_is_offline(cpu))
+ update_process_times(user_mode(regs));
+
+ /*
+ * No need to check whether cpu is offline here; boot_cpuid
+ * should have been fixed up by now.
+ */
+ if (cpu != boot_cpuid)
+ continue;
+
+ write_seqlock(&xtime_lock);
+ tb_last_stamp += tb_ticks_per_jiffy;
+ timer_recalc_offset(tb_last_stamp);
+ do_timer(regs);
+ timer_sync_xtime(tb_last_stamp);
+ timer_check_rtc();
+ write_sequnlock(&xtime_lock);
+ if (adjusting_time && (time_adjust == 0))
+ ppc_adjtimex();
+ }
+
+ next_dec = tb_ticks_per_jiffy - ticks;
+ set_dec(next_dec);
+
+#ifdef CONFIG_PPC_ISERIES
+ if (hvlpevent_is_pending())
+ process_hvlpevents(regs);
+#endif
+
+#ifdef CONFIG_PPC64
+ /* collect purr register values often, for accurate calculations */
+ if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+ struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
+ cu->current_tb = mfspr(SPRN_PURR);
+ }
+#endif
+
+ irq_exit();
+}
+
+void wakeup_decrementer(void)
+{
+ int i;
+
+ set_dec(tb_ticks_per_jiffy);
+ /*
+ * We don't expect this to be called on a machine with a 601,
+ * so using get_tbl is fine.
+ */
+ tb_last_stamp = get_tb();
+ for_each_cpu(i)
+ per_cpu(last_jiffy, i) = tb_last_stamp;
+}
+
+#ifdef CONFIG_SMPxxx
+void __init smp_space_timers(unsigned int max_cpus)
+{
+ int i;
+ unsigned long offset = tb_ticks_per_jiffy / max_cpus;
+ unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
+
+ for_each_cpu(i) {
+ if (i != boot_cpuid) {
+ previous_tb += offset;
+ per_cpu(last_jiffy, i) = previous_tb;
+ }
+ }
+}
+#endif
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ *
+ * Note: mulhdu(a, b) (multiply high double unsigned) returns
+ * the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b
+ * are 64-bit unsigned numbers.
+ */
+unsigned long long sched_clock(void)
+{
+ return mulhdu(get_tb(), tb_to_ns_scale) << tb_to_ns_shift;
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, new_sec = tv->tv_sec;
+ long wtm_nsec, new_nsec = tv->tv_nsec;
+ unsigned long flags;
+ long int tb_delta;
+ u64 new_xsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+
+ /*
+ * Updating the RTC is not the job of this code. If the time is
+ * stepped under NTP, the RTC will be updated after STA_UNSYNC
+ * is cleared. Tools like clock/hwclock either copy the RTC
+ * to the system time, in which case there is no point in writing
+ * to the RTC again, or write to the RTC but then they don't call
+ * settimeofday to perform this operation.
+ */
+#ifdef CONFIG_PPC_ISERIES
+ if (first_settimeofday) {
+ iSeries_tb_recal();
+ first_settimeofday = 0;
+ }
+#endif
+ tb_delta = tb_ticks_since(tb_last_stamp);
+ tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
+
+ new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
+
+ set_normalized_timespec(&xtime, new_sec, new_nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ /* In case of a large backwards jump in time with NTP, we want the
+ * clock to be updated as soon as the PLL is again in lock.
+ */
+ last_rtc_update = new_sec - 658;
+
+ ntp_clear();
+
+ new_xsec = (u64)new_nsec * XSEC_PER_SEC;
+ do_div(new_xsec, NSEC_PER_SEC);
+ new_xsec += (u64)new_sec * XSEC_PER_SEC;
+ update_gtod(tb_last_stamp, new_xsec, do_gtod.varp->tb_to_xs);
+
+#ifdef CONFIG_PPC64
+ systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
+ systemcfg->tz_dsttime = sys_tz.tz_dsttime;
+#endif
+
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ clock_was_set();
+ return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) || defined(CONFIG_PPC_ISERIES)
+void __init generic_calibrate_decr(void)
+{
+ struct device_node *cpu;
+ struct div_result divres;
+ unsigned int *fp;
+ int node_found;
+
+ /*
+ * The cpu node should have a timebase-frequency property
+ * to tell us the rate at which the decrementer counts.
+ */
+ cpu = of_find_node_by_type(NULL, "cpu");
+
+ ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
+ node_found = 0;
+ if (cpu != 0) {
+ fp = (unsigned int *)get_property(cpu, "timebase-frequency",
+ NULL);
+ if (fp != 0) {
+ node_found = 1;
+ ppc_tb_freq = *fp;
+ }
+ }
+ if (!node_found)
+ printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+ "(not found)\n");
+
+ ppc_proc_freq = DEFAULT_PROC_FREQ;
+ node_found = 0;
+ if (cpu != 0) {
+ fp = (unsigned int *)get_property(cpu, "clock-frequency",
+ NULL);
+ if (fp != 0) {
+ node_found = 1;
+ ppc_proc_freq = *fp;
+ }
+ }
+ if (!node_found)
+ printk(KERN_ERR "WARNING: Estimating processor frequency "
+ "(not found)\n");
+
+ of_node_put(cpu);
+
+ printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+ ppc_tb_freq/1000000, ppc_tb_freq%1000000);
+ printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n",
+ ppc_proc_freq/1000000, ppc_proc_freq%1000000);
+
+ tb_ticks_per_jiffy = ppc_tb_freq / HZ;
+ tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
+ tb_ticks_per_usec = ppc_tb_freq / 1000000;
+ tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
+ div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
+ tb_to_xs = divres.result_low;
+}
+#endif
+
+unsigned long get_boot_time(void)
+{
+ struct rtc_time tm;
+
+ if (ppc_md.get_boot_time)
+ return ppc_md.get_boot_time();
+ if (!ppc_md.get_rtc_time)
+ return 0;
+ ppc_md.get_rtc_time(&tm);
+ return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+/* This function is only called on the boot processor */
+void __init time_init(void)
+{
+ unsigned long flags;
+ unsigned long tm = 0;
+ struct div_result res;
+ u64 scale;
+ unsigned shift;
+
+ if (ppc_md.time_init != NULL)
+ timezone_offset = ppc_md.time_init();
+
+ ppc_md.calibrate_decr();
+
+#ifdef CONFIG_PPC64
+ get_paca()->default_decr = tb_ticks_per_jiffy;
+#endif
+
+ /*
+ * Compute scale factor for sched_clock.
+ * The calibrate_decr() function has set tb_ticks_per_sec,
+ * which is the timebase frequency.
+ * We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret
+ * the 128-bit result as a 64.64 fixed-point number.
+ * We then shift that number right until it is less than 1.0,
+ * giving us the scale factor and shift count to use in
+ * sched_clock().
+ */
+ div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
+ scale = res.result_low;
+ for (shift = 0; res.result_high != 0; ++shift) {
+ scale = (scale >> 1) | (res.result_high << 63);
+ res.result_high >>= 1;
+ }
+ tb_to_ns_scale = scale;
+ tb_to_ns_shift = shift;
+
+#ifdef CONFIG_PPC_ISERIES
+ if (!piranha_simulator)
+#endif
+ tm = get_boot_time();
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+ xtime.tv_sec = tm;
+ xtime.tv_nsec = 0;
+ tb_last_stamp = get_tb();
+ do_gtod.varp = &do_gtod.vars[0];
+ do_gtod.var_idx = 0;
+ do_gtod.varp->tb_orig_stamp = tb_last_stamp;
+ __get_cpu_var(last_jiffy) = tb_last_stamp;
+ do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
+ do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
+ do_gtod.varp->tb_to_xs = tb_to_xs;
+ do_gtod.tb_to_us = tb_to_us;
+#ifdef CONFIG_PPC64
+ systemcfg->tb_orig_stamp = tb_last_stamp;
+ systemcfg->tb_update_count = 0;
+ systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
+ systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
+ systemcfg->tb_to_xs = tb_to_xs;
+#endif
+
+ time_freq = 0;
+
+ /* If platform provided a timezone (pmac), we correct the time */
+ if (timezone_offset) {
+ sys_tz.tz_minuteswest = -timezone_offset / 60;
+ sys_tz.tz_dsttime = 0;
+ xtime.tv_sec -= timezone_offset;
+ }
+
+ last_rtc_update = xtime.tv_sec;
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
+ /* Not exact, but the timer interrupt takes care of this */
+ set_dec(tb_ticks_per_jiffy);
+}
+
+/*
+ * After adjtimex is called, adjust the conversion of tb ticks
+ * to microseconds to keep do_gettimeofday synchronized
+ * with ntpd.
+ *
+ * Use the time_adjust, time_freq and time_offset computed by adjtimex to
+ * adjust the frequency.
+ */
+
+/* #define DEBUG_PPC_ADJTIMEX 1 */
+
+void ppc_adjtimex(void)
+{
+#ifdef CONFIG_PPC64
+ unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec,
+ new_tb_to_xs, new_xsec, new_stamp_xsec;
+ unsigned long tb_ticks_per_sec_delta;
+ long delta_freq, ltemp;
+ struct div_result divres;
+ unsigned long flags;
+ long singleshot_ppm = 0;
+
+ /*
+ * Compute parts per million frequency adjustment to
+ * accomplish the time adjustment implied by time_offset to be
+ * applied over the elapsed time indicated by time_constant.
+ * Use SHIFT_USEC to get it into the same units as
+ * time_freq.
+ */
+ if ( time_offset < 0 ) {
+ ltemp = -time_offset;
+ ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
+ ltemp >>= SHIFT_KG + time_constant;
+ ltemp = -ltemp;
+ } else {
+ ltemp = time_offset;
+ ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
+ ltemp >>= SHIFT_KG + time_constant;
+ }
+
+ /* If there is a single shot time adjustment in progress */
+ if ( time_adjust ) {
+#ifdef DEBUG_PPC_ADJTIMEX
+ printk("ppc_adjtimex: ");
+ if ( adjusting_time == 0 )
+ printk("starting ");
+ printk("single shot time_adjust = %ld\n", time_adjust);
+#endif
+
+ adjusting_time = 1;
+
+ /*
+ * Compute parts per million frequency adjustment
+ * to match time_adjust
+ */
+ singleshot_ppm = tickadj * HZ;
+ /*
+ * The adjustment should be tickadj*HZ to match the code in
+ * linux/kernel/timer.c, but experiments show that this is too
+ * large. 3/4 of tickadj*HZ seems about right
+ */
+ singleshot_ppm -= singleshot_ppm / 4;
+ /* Use SHIFT_USEC to get it into the same units as time_freq */
+ singleshot_ppm <<= SHIFT_USEC;
+ if ( time_adjust < 0 )
+ singleshot_ppm = -singleshot_ppm;
+ }
+ else {
+#ifdef DEBUG_PPC_ADJTIMEX
+ if ( adjusting_time )
+ printk("ppc_adjtimex: ending single shot time_adjust\n");
+#endif
+ adjusting_time = 0;
+ }
+
+ /* Add up all of the frequency adjustments */
+ delta_freq = time_freq + ltemp + singleshot_ppm;
+
+ /*
+ * Compute a new value for tb_ticks_per_sec based on
+ * the frequency adjustment
+ */
+ den = 1000000 * (1 << (SHIFT_USEC - 8));
+ if ( delta_freq < 0 ) {
+ tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den;
+ new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta;
+ }
+ else {
+ tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den;
+ new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta;
+ }
+
+#ifdef DEBUG_PPC_ADJTIMEX
+ printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm);
+ printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec);
+#endif
+
+ /*
+ * Compute a new value of tb_to_xs (used to convert tb to
+ * microseconds) and a new value of stamp_xsec which is the
+ * time (in 1/2^20 second units) corresponding to
+ * tb_orig_stamp. This new value of stamp_xsec compensates
+ * for the change in frequency (implied by the new tb_to_xs)
+ * which guarantees that the current time remains the same.
+ */
+ write_seqlock_irqsave( &xtime_lock, flags );
+ tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp;
+ div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
+ new_tb_to_xs = divres.result_low;
+ new_xsec = mulhdu(tb_ticks, new_tb_to_xs);
+
+ old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs);
+ new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec;
+
+ update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs);
+
+ write_sequnlock_irqrestore( &xtime_lock, flags );
+#endif /* CONFIG_PPC64 */
+}
+
+
+#define FEBRUARY 2
+#define STARTOFTIME 1970
+#define SECDAY 86400L
+#define SECYR (SECDAY * 365)
+#define leapyear(year) ((year) % 4 == 0 && \
+ ((year) % 100 != 0 || (year) % 400 == 0))
+#define days_in_year(a) (leapyear(a) ? 366 : 365)
+#define days_in_month(a) (month_days[(a) - 1])
+
+static int month_days[12] = {
+ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
+};
+
+/*
+ * This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
+ */
+void GregorianDay(struct rtc_time * tm)
+{
+ int leapsToDate;
+ int lastYear;
+ int day;
+ int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
+
+ lastYear = tm->tm_year - 1;
+
+ /*
+ * Number of leap corrections to apply up to end of last year
+ */
+ leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
+
+ /*
+ * This year is a leap year if it is divisible by 4 except when it is
+ * divisible by 100 unless it is divisible by 400
+ *
+ * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
+ */
+ day = tm->tm_mon > 2 && leapyear(tm->tm_year);
+
+ day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
+ tm->tm_mday;
+
+ tm->tm_wday = day % 7;
+}
+
+void to_tm(int tim, struct rtc_time * tm)
+{
+ register int i;
+ register long hms, day;
+
+ day = tim / SECDAY;
+ hms = tim % SECDAY;
+
+ /* Hours, minutes, seconds are easy */
+ tm->tm_hour = hms / 3600;
+ tm->tm_min = (hms % 3600) / 60;
+ tm->tm_sec = (hms % 3600) % 60;
+
+ /* Number of years in days */
+ for (i = STARTOFTIME; day >= days_in_year(i); i++)
+ day -= days_in_year(i);
+ tm->tm_year = i;
+
+ /* Number of months in days left */
+ if (leapyear(tm->tm_year))
+ days_in_month(FEBRUARY) = 29;
+ for (i = 1; day >= days_in_month(i); i++)
+ day -= days_in_month(i);
+ days_in_month(FEBRUARY) = 28;
+ tm->tm_mon = i;
+
+ /* Days are what is left over (+1) from all that. */
+ tm->tm_mday = day + 1;
+
+ /*
+ * Determine the day of week
+ */
+ GregorianDay(tm);
+}
+
+/* Auxiliary function to compute scaling factors */
+/* Actually the choice of a timebase running at 1/4 the of the bus
+ * frequency giving resolution of a few tens of nanoseconds is quite nice.
+ * It makes this computation very precise (27-28 bits typically) which
+ * is optimistic considering the stability of most processor clock
+ * oscillators and the precision with which the timebase frequency
+ * is measured but does not harm.
+ */
+unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale)
+{
+ unsigned mlt=0, tmp, err;
+ /* No concern for performance, it's done once: use a stupid
+ * but safe and compact method to find the multiplier.
+ */
+
+ for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
+ if (mulhwu(inscale, mlt|tmp) < outscale)
+ mlt |= tmp;
+ }
+
+ /* We might still be off by 1 for the best approximation.
+ * A side effect of this is that if outscale is too large
+ * the returned value will be zero.
+ * Many corner cases have been checked and seem to work,
+ * some might have been forgotten in the test however.
+ */
+
+ err = inscale * (mlt+1);
+ if (err <= inscale/2)
+ mlt++;
+ return mlt;
+}
+
+/*
+ * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
+ * result.
+ */
+void div128_by_32(u64 dividend_high, u64 dividend_low,
+ unsigned divisor, struct div_result *dr)
+{
+ unsigned long a, b, c, d;
+ unsigned long w, x, y, z;
+ u64 ra, rb, rc;
+
+ a = dividend_high >> 32;
+ b = dividend_high & 0xffffffff;
+ c = dividend_low >> 32;
+ d = dividend_low & 0xffffffff;
+
+ w = a / divisor;
+ ra = ((u64)(a - (w * divisor)) << 32) + b;
+
+#ifdef CONFIG_PPC64
+ x = ra / divisor;
+ rb = ((ra - (x * divisor)) << 32) + c;
+
+ y = rb / divisor;
+ rc = ((rb - (y * divisor)) << 32) + d;
+
+ z = rc / divisor;
+#else
+ /* for 32-bit, use do_div from div64.h */
+ rb = ((u64) do_div(ra, divisor) << 32) + c;
+ x = ra;
+
+ rc = ((u64) do_div(rb, divisor) << 32) + d;
+ y = rb;
+
+ do_div(rc, divisor);
+ z = rc;
+#endif
+
+ dr->result_high = ((u64)w << 32) + x;
+ dr->result_low = ((u64)y << 32) + z;
+
+}
+
msleep(ms);
}
-static inline void wakeup_decrementer(void)
-{
- set_dec(tb_ticks_per_jiffy);
- /* No currently-supported powerbook has a 601,
- * so use get_tbl, not native
- */
- last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-
#ifdef DEBUG_FREQ
static inline void debug_calc_bogomips(void)
{
*
* Paul Mackerras August 1996.
* Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
+ *
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
+#include <linux/interrupt.h>
#include <linux/hardirq.h>
+#include <linux/rtc.h>
#include <asm/sections.h>
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/nvram.h>
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
/* Apparently the RTC stores seconds since 1 Jan 1904 */
#define RTC_OFFSET 2082844800
/* Bits in IFR and IER */
#define T1_INT 0x40 /* Timer 1 interrupt */
-extern struct timezone sys_tz;
-
-long __init
-pmac_time_init(void)
+long __init pmac_time_init(void)
{
#ifdef CONFIG_NVRAM
s32 delta = 0;
tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
- printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
+ printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %lu (%u ticks)\n",
tb_ticks_per_jiffy, dstart - dend);
iounmap(via);
static unsigned long time_diff;
unsigned long flags;
unsigned long seq;
+ struct timespec tv;
switch (when) {
case PBOOK_SLEEP_NOW:
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
break;
case PBOOK_WAKE:
- write_seqlock_irqsave(&xtime_lock, flags);
- xtime.tv_sec = pmac_get_rtc_time() + time_diff;
- xtime.tv_nsec = 0;
- last_rtc_update = xtime.tv_sec;
- write_sequnlock_irqrestore(&xtime_lock, flags);
+ tv.tv_sec = pmac_get_boot_time() + time_diff;
+ tv.tv_nsec = 0;
+ do_settimeofday(&tv);
break;
}
return PBOOK_SLEEP_OK;
# These are here while we do the architecture merge
else
-obj-y := irq.o idle.o time.o \
+obj-y := irq.o idle.o \
align.o perfmon.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
EXPORT_SYMBOL(profile_pc);
#endif
+void wakeup_decrementer(void)
+{
+ set_dec(tb_ticks_per_jiffy);
+ /* No currently-supported powerbook has a 601,
+ * so use get_tbl, not native
+ */
+ last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
+}
+
/*
* timer_interrupt - gets called when the decrementer overflows,
* with interrupts disabled.
endif
obj-y += irq.o idle.o dma.o \
- time.o signal.o \
+ signal.o \
align.o bitops.o pacaData.o \
udbg.o ioctl32.o \
rtc.o \
if (fp == 0)
panic("can't get cpu processor frequency");
ppc_proc_freq = *fp;
-
- setup_default_decr();
}
printk("[terminate]%04x %s\n", src, msg);
}
-/* This should only be called on processor 0 during calibrate decr */
-void __init setup_default_decr(void)
-{
- struct paca_struct *lpaca = get_paca();
-
- lpaca->default_decr = tb_ticks_per_jiffy;
- lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
-}
-
#ifndef CONFIG_PPC_ISERIES
/*
* This function can be used by platforms to "find" legacy serial ports.
+++ /dev/null
-/*
- *
- * Common time routines among all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
- * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com)
- *
- * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
- * to make clock more stable (2.4.0-test5). The only thing
- * that this code assumes is that the timebases have been synchronized
- * by firmware on SMP and are never stopped (never do sleep
- * on SMP then, nap and doze are OK).
- *
- * Speeded up do_gettimeofday by getting rid of references to
- * xtime (which required locks for consistency). (mikejc@us.ibm.com)
- *
- * TODO (not necessarily in this file):
- * - improve precision and reproducibility of timebase frequency
- * measurement at boot time. (for iSeries, we calibrate the timebase
- * against the Titan chip's clock.)
- * - for astronomical applications: add a new function to get
- * non ambiguous timestamps even around leap seconds. This needs
- * a new timestamp format and a good name.
- *
- * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
- * "A Kernel Model for Precision Timekeeping" by Dave Mills
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/cpu.h>
-#include <linux/security.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/machdep.h>
-#ifdef CONFIG_PPC_ISERIES
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/HvCallXm.h>
-#endif
-#include <asm/uaccess.h>
-#include <asm/time.h>
-#include <asm/ppcdebug.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/systemcfg.h>
-#include <asm/firmware.h>
-
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
-/* keep track of when we need to update the rtc */
-time_t last_rtc_update;
-extern int piranha_simulator;
-#ifdef CONFIG_PPC_ISERIES
-unsigned long iSeries_recal_titan = 0;
-unsigned long iSeries_recal_tb = 0;
-static unsigned long first_settimeofday = 1;
-#endif
-
-#define XSEC_PER_SEC (1024*1024)
-
-unsigned long tb_ticks_per_jiffy;
-unsigned long tb_ticks_per_usec = 100; /* sane default */
-EXPORT_SYMBOL(tb_ticks_per_usec);
-unsigned long tb_ticks_per_sec;
-unsigned long tb_to_xs;
-unsigned tb_to_us;
-unsigned long processor_freq;
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL_GPL(rtc_lock);
-
-unsigned long tb_to_ns_scale;
-unsigned long tb_to_ns_shift;
-
-struct gettimeofday_struct do_gtod;
-
-extern unsigned long wall_jiffies;
-extern int smp_tb_synchronized;
-
-extern struct timezone sys_tz;
-
-void ppc_adjtimex(void);
-
-static unsigned adjusting_time = 0;
-
-unsigned long ppc_proc_freq;
-unsigned long ppc_tb_freq;
-
-static __inline__ void timer_check_rtc(void)
-{
- /*
- * update the rtc when needed, this should be performed on the
- * right fraction of a second. Half or full second ?
- * Full second works on mk48t59 clocks, others need testing.
- * Note that this update is basically only used through
- * the adjtimex system calls. Setting the HW clock in
- * any other way is a /dev/rtc and userland business.
- * This is still wrong by -0.5/+1.5 jiffies because of the
- * timer interrupt resolution and possible delay, but here we
- * hit a quantization limit which can only be solved by higher
- * resolution timers and decoupling time management from timer
- * interrupts. This is also wrong on the clocks
- * which require being written at the half second boundary.
- * We should have an rtc call that only sets the minutes and
- * seconds like on Intel to avoid problems with non UTC clocks.
- */
- if (ntp_synced() &&
- xtime.tv_sec - last_rtc_update >= 659 &&
- abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
- jiffies - wall_jiffies == 1) {
- struct rtc_time tm;
- to_tm(xtime.tv_sec+1, &tm);
- tm.tm_year -= 1900;
- tm.tm_mon -= 1;
- if (ppc_md.set_rtc_time(&tm) == 0)
- last_rtc_update = xtime.tv_sec+1;
- else
- /* Try again one minute later */
- last_rtc_update += 60;
- }
-}
-
-/*
- * This version of gettimeofday has microsecond resolution.
- */
-static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val)
-{
- unsigned long sec, usec, tb_ticks;
- unsigned long xsec, tb_xsec;
- struct gettimeofday_vars * temp_varp;
- unsigned long temp_tb_to_xs, temp_stamp_xsec;
-
- /*
- * These calculations are faster (gets rid of divides)
- * if done in units of 1/2^20 rather than microseconds.
- * The conversion to microseconds at the end is done
- * without a divide (and in fact, without a multiply)
- */
- temp_varp = do_gtod.varp;
- tb_ticks = tb_val - temp_varp->tb_orig_stamp;
- temp_tb_to_xs = temp_varp->tb_to_xs;
- temp_stamp_xsec = temp_varp->stamp_xsec;
- tb_xsec = mulhdu( tb_ticks, temp_tb_to_xs );
- xsec = temp_stamp_xsec + tb_xsec;
- sec = xsec / XSEC_PER_SEC;
- xsec -= sec * XSEC_PER_SEC;
- usec = (xsec * USEC_PER_SEC)/XSEC_PER_SEC;
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
- __do_gettimeofday(tv, get_tb());
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-/* Synchronize xtime with do_gettimeofday */
-
-static inline void timer_sync_xtime(unsigned long cur_tb)
-{
- struct timeval my_tv;
-
- __do_gettimeofday(&my_tv, cur_tb);
-
- if (xtime.tv_sec <= my_tv.tv_sec) {
- xtime.tv_sec = my_tv.tv_sec;
- xtime.tv_nsec = my_tv.tv_usec * 1000;
- }
-}
-
-/*
- * When the timebase - tb_orig_stamp gets too big, we do a manipulation
- * between tb_orig_stamp and stamp_xsec. The goal here is to keep the
- * difference tb - tb_orig_stamp small enough to always fit inside a
- * 32 bits number. This is a requirement of our fast 32 bits userland
- * implementation in the vdso. If we "miss" a call to this function
- * (interrupt latency, CPU locked in a spinlock, ...) and we end up
- * with a too big difference, then the vdso will fallback to calling
- * the syscall
- */
-static __inline__ void timer_recalc_offset(unsigned long cur_tb)
-{
- struct gettimeofday_vars * temp_varp;
- unsigned temp_idx;
- unsigned long offset, new_stamp_xsec, new_tb_orig_stamp;
-
- if (((cur_tb - do_gtod.varp->tb_orig_stamp) & 0x80000000u) == 0)
- return;
-
- temp_idx = (do_gtod.var_idx == 0);
- temp_varp = &do_gtod.vars[temp_idx];
-
- new_tb_orig_stamp = cur_tb;
- offset = new_tb_orig_stamp - do_gtod.varp->tb_orig_stamp;
- new_stamp_xsec = do_gtod.varp->stamp_xsec + mulhdu(offset, do_gtod.varp->tb_to_xs);
-
- temp_varp->tb_to_xs = do_gtod.varp->tb_to_xs;
- temp_varp->tb_orig_stamp = new_tb_orig_stamp;
- temp_varp->stamp_xsec = new_stamp_xsec;
- smp_mb();
- do_gtod.varp = temp_varp;
- do_gtod.var_idx = temp_idx;
-
- ++(systemcfg->tb_update_count);
- smp_wmb();
- systemcfg->tb_orig_stamp = new_tb_orig_stamp;
- systemcfg->stamp_xsec = new_stamp_xsec;
- smp_wmb();
- ++(systemcfg->tb_update_count);
-}
-
-#ifdef CONFIG_SMP
-unsigned long profile_pc(struct pt_regs *regs)
-{
- unsigned long pc = instruction_pointer(regs);
-
- if (in_lock_functions(pc))
- return regs->link;
-
- return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-#endif
-
-#ifdef CONFIG_PPC_ISERIES
-
-/*
- * This function recalibrates the timebase based on the 49-bit time-of-day
- * value in the Titan chip. The Titan is much more accurate than the value
- * returned by the service processor for the timebase frequency.
- */
-
-static void iSeries_tb_recal(void)
-{
- struct div_result divres;
- unsigned long titan, tb;
- tb = get_tb();
- titan = HvCallXm_loadTod();
- if ( iSeries_recal_titan ) {
- unsigned long tb_ticks = tb - iSeries_recal_tb;
- unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
- unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec;
- unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
- long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
- char sign = '+';
- /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
- new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ;
-
- if ( tick_diff < 0 ) {
- tick_diff = -tick_diff;
- sign = '-';
- }
- if ( tick_diff ) {
- if ( tick_diff < tb_ticks_per_jiffy/25 ) {
- printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n",
- new_tb_ticks_per_jiffy, sign, tick_diff );
- tb_ticks_per_jiffy = new_tb_ticks_per_jiffy;
- tb_ticks_per_sec = new_tb_ticks_per_sec;
- div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
- do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
- tb_to_xs = divres.result_low;
- do_gtod.varp->tb_to_xs = tb_to_xs;
- systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
- systemcfg->tb_to_xs = tb_to_xs;
- }
- else {
- printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
- " new tb_ticks_per_jiffy = %lu\n"
- " old tb_ticks_per_jiffy = %lu\n",
- new_tb_ticks_per_jiffy, tb_ticks_per_jiffy );
- }
- }
- }
- iSeries_recal_titan = titan;
- iSeries_recal_tb = tb;
-}
-#endif
-
-/*
- * For iSeries shared processors, we have to let the hypervisor
- * set the hardware decrementer. We set a virtual decrementer
- * in the lppaca and call the hypervisor if the virtual
- * decrementer is less than the current value in the hardware
- * decrementer. (almost always the new decrementer value will
- * be greater than the current hardware decementer so the hypervisor
- * call will not be needed)
- */
-
-unsigned long tb_last_stamp __cacheline_aligned_in_smp;
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- */
-void timer_interrupt(struct pt_regs * regs)
-{
- int next_dec;
- unsigned long cur_tb;
- struct paca_struct *lpaca = get_paca();
- unsigned long cpu = smp_processor_id();
-
- irq_enter();
-
- profile_tick(CPU_PROFILING, regs);
-
- lpaca->lppaca.int_dword.fields.decr_int = 0;
-
- while (lpaca->next_jiffy_update_tb <= (cur_tb = get_tb())) {
- /*
- * We cannot disable the decrementer, so in the period
- * between this cpu's being marked offline in cpu_online_map
- * and calling stop-self, it is taking timer interrupts.
- * Avoid calling into the scheduler rebalancing code if this
- * is the case.
- */
- if (!cpu_is_offline(cpu))
- update_process_times(user_mode(regs));
- /*
- * No need to check whether cpu is offline here; boot_cpuid
- * should have been fixed up by now.
- */
- if (cpu == boot_cpuid) {
- write_seqlock(&xtime_lock);
- tb_last_stamp = lpaca->next_jiffy_update_tb;
- timer_recalc_offset(lpaca->next_jiffy_update_tb);
- do_timer(regs);
- timer_sync_xtime(lpaca->next_jiffy_update_tb);
- timer_check_rtc();
- write_sequnlock(&xtime_lock);
- if ( adjusting_time && (time_adjust == 0) )
- ppc_adjtimex();
- }
- lpaca->next_jiffy_update_tb += tb_ticks_per_jiffy;
- }
-
- next_dec = lpaca->next_jiffy_update_tb - cur_tb;
- if (next_dec > lpaca->default_decr)
- next_dec = lpaca->default_decr;
- set_dec(next_dec);
-
-#ifdef CONFIG_PPC_ISERIES
- if (hvlpevent_is_pending())
- process_hvlpevents(regs);
-#endif
-
- /* collect purr register values often, for accurate calculations */
- if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
- struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
- cu->current_tb = mfspr(SPRN_PURR);
- }
-
- irq_exit();
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- *
- * Note: mulhdu(a, b) (multiply high double unsigned) returns
- * the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b
- * are 64-bit unsigned numbers.
- */
-unsigned long long sched_clock(void)
-{
- return mulhdu(get_tb(), tb_to_ns_scale) << tb_to_ns_shift;
-}
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, new_sec = tv->tv_sec;
- long wtm_nsec, new_nsec = tv->tv_nsec;
- unsigned long flags;
- unsigned long delta_xsec;
- long int tb_delta;
- unsigned long new_xsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irqsave(&xtime_lock, flags);
- /* Updating the RTC is not the job of this code. If the time is
- * stepped under NTP, the RTC will be update after STA_UNSYNC
- * is cleared. Tool like clock/hwclock either copy the RTC
- * to the system time, in which case there is no point in writing
- * to the RTC again, or write to the RTC but then they don't call
- * settimeofday to perform this operation.
- */
-#ifdef CONFIG_PPC_ISERIES
- if ( first_settimeofday ) {
- iSeries_tb_recal();
- first_settimeofday = 0;
- }
-#endif
- tb_delta = tb_ticks_since(tb_last_stamp);
- tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
-
- new_nsec -= tb_delta / tb_ticks_per_usec / 1000;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
-
- set_normalized_timespec(&xtime, new_sec, new_nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- /* In case of a large backwards jump in time with NTP, we want the
- * clock to be updated as soon as the PLL is again in lock.
- */
- last_rtc_update = new_sec - 658;
-
- ntp_clear();
-
- delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp),
- do_gtod.varp->tb_to_xs );
-
- new_xsec = (new_nsec * XSEC_PER_SEC) / NSEC_PER_SEC;
- new_xsec += new_sec * XSEC_PER_SEC;
- if ( new_xsec > delta_xsec ) {
- do_gtod.varp->stamp_xsec = new_xsec - delta_xsec;
- systemcfg->stamp_xsec = new_xsec - delta_xsec;
- }
- else {
- /* This is only for the case where the user is setting the time
- * way back to a time such that the boot time would have been
- * before 1970 ... eg. we booted ten days ago, and we are setting
- * the time to Jan 5, 1970 */
- do_gtod.varp->stamp_xsec = new_xsec;
- do_gtod.varp->tb_orig_stamp = tb_last_stamp;
- systemcfg->stamp_xsec = new_xsec;
- systemcfg->tb_orig_stamp = tb_last_stamp;
- }
-
- systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
- systemcfg->tz_dsttime = sys_tz.tz_dsttime;
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) || defined(CONFIG_PPC_ISERIES)
-void __init generic_calibrate_decr(void)
-{
- struct device_node *cpu;
- struct div_result divres;
- unsigned int *fp;
- int node_found;
-
- /*
- * The cpu node should have a timebase-frequency property
- * to tell us the rate at which the decrementer counts.
- */
- cpu = of_find_node_by_type(NULL, "cpu");
-
- ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
- node_found = 0;
- if (cpu != 0) {
- fp = (unsigned int *)get_property(cpu, "timebase-frequency",
- NULL);
- if (fp != 0) {
- node_found = 1;
- ppc_tb_freq = *fp;
- }
- }
- if (!node_found)
- printk(KERN_ERR "WARNING: Estimating decrementer frequency "
- "(not found)\n");
-
- ppc_proc_freq = DEFAULT_PROC_FREQ;
- node_found = 0;
- if (cpu != 0) {
- fp = (unsigned int *)get_property(cpu, "clock-frequency",
- NULL);
- if (fp != 0) {
- node_found = 1;
- ppc_proc_freq = *fp;
- }
- }
- if (!node_found)
- printk(KERN_ERR "WARNING: Estimating processor frequency "
- "(not found)\n");
-
- of_node_put(cpu);
-
- printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
- ppc_tb_freq/1000000, ppc_tb_freq%1000000);
- printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n",
- ppc_proc_freq/1000000, ppc_proc_freq%1000000);
-
- tb_ticks_per_jiffy = ppc_tb_freq / HZ;
- tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
- tb_ticks_per_usec = ppc_tb_freq / 1000000;
- tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
- div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
- tb_to_xs = divres.result_low;
-
- setup_default_decr();
-}
-#endif
-
-void __init time_init(void)
-{
- /* This function is only called on the boot processor */
- unsigned long flags;
- struct rtc_time tm;
- struct div_result res;
- unsigned long scale, shift;
-
- ppc_md.calibrate_decr();
-
- /*
- * Compute scale factor for sched_clock.
- * The calibrate_decr() function has set tb_ticks_per_sec,
- * which is the timebase frequency.
- * We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret
- * the 128-bit result as a 64.64 fixed-point number.
- * We then shift that number right until it is less than 1.0,
- * giving us the scale factor and shift count to use in
- * sched_clock().
- */
- div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
- scale = res.result_low;
- for (shift = 0; res.result_high != 0; ++shift) {
- scale = (scale >> 1) | (res.result_high << 63);
- res.result_high >>= 1;
- }
- tb_to_ns_scale = scale;
- tb_to_ns_shift = shift;
-
-#ifdef CONFIG_PPC_ISERIES
- if (!piranha_simulator)
-#endif
- ppc_md.get_boot_time(&tm);
-
- write_seqlock_irqsave(&xtime_lock, flags);
- xtime.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
- tb_last_stamp = get_tb();
- do_gtod.varp = &do_gtod.vars[0];
- do_gtod.var_idx = 0;
- do_gtod.varp->tb_orig_stamp = tb_last_stamp;
- get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy;
- do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
- do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
- do_gtod.varp->tb_to_xs = tb_to_xs;
- do_gtod.tb_to_us = tb_to_us;
- systemcfg->tb_orig_stamp = tb_last_stamp;
- systemcfg->tb_update_count = 0;
- systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
- systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
- systemcfg->tb_to_xs = tb_to_xs;
-
- time_freq = 0;
-
- xtime.tv_nsec = 0;
- last_rtc_update = xtime.tv_sec;
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- /* Not exact, but the timer interrupt takes care of this */
- set_dec(tb_ticks_per_jiffy);
-}
-
-/*
- * After adjtimex is called, adjust the conversion of tb ticks
- * to microseconds to keep do_gettimeofday synchronized
- * with ntpd.
- *
- * Use the time_adjust, time_freq and time_offset computed by adjtimex to
- * adjust the frequency.
- */
-
-/* #define DEBUG_PPC_ADJTIMEX 1 */
-
-void ppc_adjtimex(void)
-{
- unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, new_tb_to_xs, new_xsec, new_stamp_xsec;
- unsigned long tb_ticks_per_sec_delta;
- long delta_freq, ltemp;
- struct div_result divres;
- unsigned long flags;
- struct gettimeofday_vars * temp_varp;
- unsigned temp_idx;
- long singleshot_ppm = 0;
-
- /* Compute parts per million frequency adjustment to accomplish the time adjustment
- implied by time_offset to be applied over the elapsed time indicated by time_constant.
- Use SHIFT_USEC to get it into the same units as time_freq. */
- if ( time_offset < 0 ) {
- ltemp = -time_offset;
- ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
- ltemp >>= SHIFT_KG + time_constant;
- ltemp = -ltemp;
- }
- else {
- ltemp = time_offset;
- ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
- ltemp >>= SHIFT_KG + time_constant;
- }
-
- /* If there is a single shot time adjustment in progress */
- if ( time_adjust ) {
-#ifdef DEBUG_PPC_ADJTIMEX
- printk("ppc_adjtimex: ");
- if ( adjusting_time == 0 )
- printk("starting ");
- printk("single shot time_adjust = %ld\n", time_adjust);
-#endif
-
- adjusting_time = 1;
-
- /* Compute parts per million frequency adjustment to match time_adjust */
- singleshot_ppm = tickadj * HZ;
- /*
- * The adjustment should be tickadj*HZ to match the code in
- * linux/kernel/timer.c, but experiments show that this is too
- * large. 3/4 of tickadj*HZ seems about right
- */
- singleshot_ppm -= singleshot_ppm / 4;
- /* Use SHIFT_USEC to get it into the same units as time_freq */
- singleshot_ppm <<= SHIFT_USEC;
- if ( time_adjust < 0 )
- singleshot_ppm = -singleshot_ppm;
- }
- else {
-#ifdef DEBUG_PPC_ADJTIMEX
- if ( adjusting_time )
- printk("ppc_adjtimex: ending single shot time_adjust\n");
-#endif
- adjusting_time = 0;
- }
-
- /* Add up all of the frequency adjustments */
- delta_freq = time_freq + ltemp + singleshot_ppm;
-
- /* Compute a new value for tb_ticks_per_sec based on the frequency adjustment */
- den = 1000000 * (1 << (SHIFT_USEC - 8));
- if ( delta_freq < 0 ) {
- tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den;
- new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta;
- }
- else {
- tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den;
- new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta;
- }
-
-#ifdef DEBUG_PPC_ADJTIMEX
- printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm);
- printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec);
-#endif
-
- /* Compute a new value of tb_to_xs (used to convert tb to microseconds and a new value of
- stamp_xsec which is the time (in 1/2^20 second units) corresponding to tb_orig_stamp. This
- new value of stamp_xsec compensates for the change in frequency (implied by the new tb_to_xs)
- which guarantees that the current time remains the same */
- write_seqlock_irqsave( &xtime_lock, flags );
- tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp;
- div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres );
- new_tb_to_xs = divres.result_low;
- new_xsec = mulhdu( tb_ticks, new_tb_to_xs );
-
- old_xsec = mulhdu( tb_ticks, do_gtod.varp->tb_to_xs );
- new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec;
-
- /* There are two copies of tb_to_xs and stamp_xsec so that no lock is needed to access and use these
- values in do_gettimeofday. We alternate the copies and as long as a reasonable time elapses between
- changes, there will never be inconsistent values. ntpd has a minimum of one minute between updates */
-
- temp_idx = (do_gtod.var_idx == 0);
- temp_varp = &do_gtod.vars[temp_idx];
-
- temp_varp->tb_to_xs = new_tb_to_xs;
- temp_varp->stamp_xsec = new_stamp_xsec;
- temp_varp->tb_orig_stamp = do_gtod.varp->tb_orig_stamp;
- smp_mb();
- do_gtod.varp = temp_varp;
- do_gtod.var_idx = temp_idx;
-
- /*
- * tb_update_count is used to allow the problem state gettimeofday code
- * to assure itself that it sees a consistent view of the tb_to_xs and
- * stamp_xsec variables. It reads the tb_update_count, then reads
- * tb_to_xs and stamp_xsec and then reads tb_update_count again. If
- * the two values of tb_update_count match and are even then the
- * tb_to_xs and stamp_xsec values are consistent. If not, then it
- * loops back and reads them again until this criteria is met.
- */
- ++(systemcfg->tb_update_count);
- smp_wmb();
- systemcfg->tb_to_xs = new_tb_to_xs;
- systemcfg->stamp_xsec = new_stamp_xsec;
- smp_wmb();
- ++(systemcfg->tb_update_count);
-
- write_sequnlock_irqrestore( &xtime_lock, flags );
-
-}
-
-
-#define TICK_SIZE tick
-#define FEBRUARY 2
-#define STARTOFTIME 1970
-#define SECDAY 86400L
-#define SECYR (SECDAY * 365)
-#define leapyear(year) ((year) % 4 == 0)
-#define days_in_year(a) (leapyear(a) ? 366 : 365)
-#define days_in_month(a) (month_days[(a) - 1])
-
-static int month_days[12] = {
- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-/*
- * This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
- */
-void GregorianDay(struct rtc_time * tm)
-{
- int leapsToDate;
- int lastYear;
- int day;
- int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
-
- lastYear=tm->tm_year-1;
-
- /*
- * Number of leap corrections to apply up to end of last year
- */
- leapsToDate = lastYear/4 - lastYear/100 + lastYear/400;
-
- /*
- * This year is a leap year if it is divisible by 4 except when it is
- * divisible by 100 unless it is divisible by 400
- *
- * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 will be
- */
- if((tm->tm_year%4==0) &&
- ((tm->tm_year%100!=0) || (tm->tm_year%400==0)) &&
- (tm->tm_mon>2))
- {
- /*
- * We are past Feb. 29 in a leap year
- */
- day=1;
- }
- else
- {
- day=0;
- }
-
- day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
- tm->tm_mday;
-
- tm->tm_wday=day%7;
-}
-
-void to_tm(int tim, struct rtc_time * tm)
-{
- register int i;
- register long hms, day;
-
- day = tim / SECDAY;
- hms = tim % SECDAY;
-
- /* Hours, minutes, seconds are easy */
- tm->tm_hour = hms / 3600;
- tm->tm_min = (hms % 3600) / 60;
- tm->tm_sec = (hms % 3600) % 60;
-
- /* Number of years in days */
- for (i = STARTOFTIME; day >= days_in_year(i); i++)
- day -= days_in_year(i);
- tm->tm_year = i;
-
- /* Number of months in days left */
- if (leapyear(tm->tm_year))
- days_in_month(FEBRUARY) = 29;
- for (i = 1; day >= days_in_month(i); i++)
- day -= days_in_month(i);
- days_in_month(FEBRUARY) = 28;
- tm->tm_mon = i;
-
- /* Days are what is left over (+1) from all that. */
- tm->tm_mday = day + 1;
-
- /*
- * Determine the day of week
- */
- GregorianDay(tm);
-}
-
-/* Auxiliary function to compute scaling factors */
-/* Actually the choice of a timebase running at 1/4 the of the bus
- * frequency giving resolution of a few tens of nanoseconds is quite nice.
- * It makes this computation very precise (27-28 bits typically) which
- * is optimistic considering the stability of most processor clock
- * oscillators and the precision with which the timebase frequency
- * is measured but does not harm.
- */
-unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
- unsigned mlt=0, tmp, err;
- /* No concern for performance, it's done once: use a stupid
- * but safe and compact method to find the multiplier.
- */
-
- for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
- if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp;
- }
-
- /* We might still be off by 1 for the best approximation.
- * A side effect of this is that if outscale is too large
- * the returned value will be zero.
- * Many corner cases have been checked and seem to work,
- * some might have been forgotten in the test however.
- */
-
- err = inscale*(mlt+1);
- if (err <= inscale/2) mlt++;
- return mlt;
- }
-
-/*
- * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
- * result.
- */
-
-void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
- unsigned divisor, struct div_result *dr )
-{
- unsigned long a,b,c,d, w,x,y,z, ra,rb,rc;
-
- a = dividend_high >> 32;
- b = dividend_high & 0xffffffff;
- c = dividend_low >> 32;
- d = dividend_low & 0xffffffff;
-
- w = a/divisor;
- ra = (a - (w * divisor)) << 32;
-
- x = (ra + b)/divisor;
- rb = ((ra + b) - (x * divisor)) << 32;
-
- y = (rb + c)/divisor;
- rc = ((rb + b) - (y * divisor)) << 32;
-
- z = (rc + d)/divisor;
-
- dr->result_high = (w << 32) + x;
- dr->result_low = (y << 32) + z;
-
-}
-
return pmu_kind;
}
-#ifndef CONFIG_PPC64
-static inline void wakeup_decrementer(void)
-{
- set_dec(tb_ticks_per_jiffy);
- /* No currently-supported powerbook has a 601,
- * so use get_tbl, not native
- */
- last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-#endif
-
static void pmu_set_server_mode(int server_mode)
{
struct adb_request req;
#endif /* CONFIG_IRQSTACKS */
+extern void do_IRQ(struct pt_regs *regs);
+
#endif /* _ASM_IRQ_H */
#endif /* __KERNEL__ */
--- /dev/null
+/*
+ * Real-time clock definitions and interfaces
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_POWERPC_RTC_H__
+#define __ASM_POWERPC_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40 /* periodic interrupt enable */
+#define RTC_AIE 0x20 /* alarm interrupt enable */
+#define RTC_UIE 0x10 /* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100 /* battery bad */
+#define RTC_SQWE 0x08 /* enable square-wave output */
+#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
+#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+ if (ppc_md.get_rtc_time)
+ ppc_md.get_rtc_time(time);
+ return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+ if (ppc_md.get_rtc_time) {
+ ppc_md.set_rtc_time(time);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+ struct rtc_time h;
+
+ get_rtc_time(&h);
+ return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_RTC_H__ */
--- /dev/null
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __POWERPC_TIME_H
+#define __POWERPC_TIME_H
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+#include <asm/processor.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/iSeries/HvCall.h>
+#endif
+
+/* time.c */
+extern unsigned long tb_ticks_per_jiffy;
+extern unsigned long tb_ticks_per_usec;
+extern unsigned long tb_ticks_per_sec;
+extern u64 tb_to_xs;
+extern unsigned tb_to_us;
+extern u64 tb_last_stamp;
+
+DECLARE_PER_CPU(unsigned long, last_jiffy);
+
+struct rtc_time;
+extern void to_tm(int tim, struct rtc_time * tm);
+extern time_t last_rtc_update;
+
+extern void generic_calibrate_decr(void);
+extern void wakeup_decrementer(void);
+
+/* Some sane defaults: 125 MHz timebase, 1GHz processor */
+extern unsigned long ppc_proc_freq;
+#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8)
+extern unsigned long ppc_tb_freq;
+#define DEFAULT_TB_FREQ 125000000UL
+
+/*
+ * By putting all of this stuff into a single struct we
+ * reduce the number of cache lines touched by do_gettimeofday.
+ * Both by collecting all of the data in one cache line and
+ * by touching only one TOC entry on ppc64.
+ */
+struct gettimeofday_vars {
+ u64 tb_to_xs;
+ u64 stamp_xsec;
+ u64 tb_orig_stamp;
+};
+
+struct gettimeofday_struct {
+ unsigned long tb_ticks_per_sec;
+ struct gettimeofday_vars vars[2];
+ struct gettimeofday_vars * volatile varp;
+ unsigned var_idx;
+ unsigned tb_to_us;
+};
+
+struct div_result {
+ u64 result_high;
+ u64 result_low;
+};
+
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+#define __USE_RTC() cpu_has_feature(CPU_FTR_USE_TB)
+#else
+#define __USE_RTC() 0
+#endif
+
+/* On ppc64 this gets us the whole timebase; on ppc32 just the lower half */
+static inline unsigned long get_tbl(void)
+{
+ unsigned long tbl;
+
+#if defined(CONFIG_403GCX)
+ asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+#else
+ asm volatile("mftb %0" : "=r" (tbl));
+#endif
+ return tbl;
+}
+
+static inline unsigned int get_tbu(void)
+{
+ unsigned int tbu;
+
+#if defined(CONFIG_403GCX)
+ asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
+#else
+ asm volatile("mftbu %0" : "=r" (tbu));
+#endif
+ return tbu;
+}
+
+static inline unsigned int get_rtcl(void)
+{
+ unsigned int rtcl;
+
+ asm volatile("mfrtcl %0" : "=r" (rtcl));
+ return rtcl;
+}
+
+#ifdef CONFIG_PPC64
+static inline u64 get_tb(void)
+{
+ return mftb();
+}
+#else
+static inline u64 get_tb(void)
+{
+ unsigned int tbhi, tblo, tbhi2;
+
+ do {
+ tbhi = get_tbu();
+ tblo = get_tbl();
+ tbhi2 = get_tbu();
+ } while (tbhi != tbhi2);
+
+ return ((u64)tbhi << 32) | tblo;
+}
+#endif
+
+static inline void set_tb(unsigned int upper, unsigned int lower)
+{
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, upper);
+ mtspr(SPRN_TBWL, lower);
+}
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer. I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode. The problem is PIT stops counting when it
+ * hits zero. If it would wrap, we could use it just like a decrementer.
+ */
+static inline unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+ return (mfspr(SPRN_PIT));
+#else
+ return (mfspr(SPRN_DEC));
+#endif
+}
+
+static inline void set_dec(int val)
+{
+#if defined(CONFIG_40x)
+ return; /* Have to let it auto-reload */
+#elif defined(CONFIG_8xx_CPU6)
+ set_dec_cpu6(val);
+#else
+#ifdef CONFIG_PPC_ISERIES
+ struct paca_struct *lpaca = get_paca();
+ int cur_dec;
+
+ if (lpaca->lppaca.shared_proc) {
+ lpaca->lppaca.virtual_decr = val;
+ cur_dec = get_dec();
+ if (cur_dec > val)
+ HvCall_setVirtualDecr();
+ } else
+#endif
+ mtspr(SPRN_DEC, val);
+#endif /* not 40x or 8xx_CPU6 */
+}
+
+static inline unsigned long tb_ticks_since(unsigned long tstamp)
+{
+ if (__USE_RTC()) {
+ int delta = get_rtcl() - (unsigned int) tstamp;
+ return delta < 0 ? delta + 1000000000 : delta;
+ }
+ return get_tbl() - tstamp;
+}
+
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+#ifdef CONFIG_PPC64
+#define mulhdu(x,y) \
+({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+#else
+extern u64 mulhdu(u64, u64);
+#endif
+
+unsigned mulhwu_scale_factor(unsigned, unsigned);
+void div128_by_32(u64 dividend_high, u64 dividend_low,
+ unsigned divisor, struct div_result *dr);
+
+/* Used to store Processor Utilization register (purr) values */
+
+struct cpu_usage {
+ u64 current_tb; /* Holds the current purr register values */
+};
+
+DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC64_TIME_H */
+++ /dev/null
-/*
- * Common time prototypes and such for all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __PPC64_TIME_H
-#define __PPC64_TIME_H
-
-#ifdef __KERNEL__
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/processor.h>
-#include <asm/paca.h>
-#include <asm/iSeries/HvCall.h>
-
-/* time.c */
-extern unsigned long tb_ticks_per_jiffy;
-extern unsigned long tb_ticks_per_usec;
-extern unsigned long tb_ticks_per_sec;
-extern unsigned long tb_to_xs;
-extern unsigned tb_to_us;
-extern unsigned long tb_last_stamp;
-
-struct rtc_time;
-extern void to_tm(int tim, struct rtc_time * tm);
-extern time_t last_rtc_update;
-
-void generic_calibrate_decr(void);
-void setup_default_decr(void);
-
-/* Some sane defaults: 125 MHz timebase, 1GHz processor */
-extern unsigned long ppc_proc_freq;
-#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8)
-extern unsigned long ppc_tb_freq;
-#define DEFAULT_TB_FREQ 125000000UL
-
-/*
- * By putting all of this stuff into a single struct we
- * reduce the number of cache lines touched by do_gettimeofday.
- * Both by collecting all of the data in one cache line and
- * by touching only one TOC entry
- */
-struct gettimeofday_vars {
- unsigned long tb_to_xs;
- unsigned long stamp_xsec;
- unsigned long tb_orig_stamp;
-};
-
-struct gettimeofday_struct {
- unsigned long tb_ticks_per_sec;
- struct gettimeofday_vars vars[2];
- struct gettimeofday_vars * volatile varp;
- unsigned var_idx;
- unsigned tb_to_us;
-};
-
-struct div_result {
- unsigned long result_high;
- unsigned long result_low;
-};
-
-int via_calibrate_decr(void);
-
-static __inline__ unsigned long get_tb(void)
-{
- return mftb();
-}
-
-/* Accessor functions for the decrementer register. */
-static __inline__ unsigned int get_dec(void)
-{
- return (mfspr(SPRN_DEC));
-}
-
-static __inline__ void set_dec(int val)
-{
-#ifdef CONFIG_PPC_ISERIES
- struct paca_struct *lpaca = get_paca();
- int cur_dec;
-
- if (lpaca->lppaca.shared_proc) {
- lpaca->lppaca.virtual_decr = val;
- cur_dec = get_dec();
- if (cur_dec > val)
- HvCall_setVirtualDecr();
- } else
-#endif
- mtspr(SPRN_DEC, val);
-}
-
-static inline unsigned long tb_ticks_since(unsigned long tstamp)
-{
- return get_tb() - tstamp;
-}
-
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-#define mulhdu(x,y) \
-({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-
-unsigned mulhwu_scale_factor(unsigned, unsigned);
-void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
- unsigned divisor, struct div_result *dr );
-
-/* Used to store Processor Utilization register (purr) values */
-
-struct cpu_usage {
- u64 current_tb; /* Holds the current purr register values */
-};
-
-DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
-
-#endif /* __KERNEL__ */
-#endif /* __PPC64_TIME_H */
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff