*/
void ieee80211_free_hw(struct ieee80211_hw *hw);
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
/* trick to avoid symbol clashes with the ieee80211 subsystem */
void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_rx_status *status);
int user_power_level; /* in dBm */
int power_constr_level; /* in dBm */
+ struct work_struct restart_work;
+
#ifdef CONFIG_MAC80211_DEBUGFS
struct local_debugfsdentries {
struct dentry *rcdir;
u16 capab_info, u8 *pwr_constr_elem,
u8 pwr_constr_elem_len);
-/* Suspend/resume */
+/* Suspend/resume and hw reconfiguration */
+int ieee80211_reconfig(struct ieee80211_local *local);
+
#ifdef CONFIG_PM
int __ieee80211_suspend(struct ieee80211_hw *hw);
-int __ieee80211_resume(struct ieee80211_hw *hw);
+
+static inline int __ieee80211_resume(struct ieee80211_hw *hw)
+{
+ return ieee80211_reconfig(hw_to_local(hw));
+}
#else
static inline int __ieee80211_suspend(struct ieee80211_hw *hw)
{
return 0;
}
+
static inline int __ieee80211_resume(struct ieee80211_hw *hw)
{
return 0;
}
EXPORT_SYMBOL(ieee80211_tx_status);
+static void ieee80211_restart_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, restart_work);
+
+ rtnl_lock();
+ ieee80211_reconfig(local);
+ rtnl_unlock();
+}
+
+void ieee80211_restart_hw(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ /* use this reason, __ieee80211_resume will unblock it */
+ ieee80211_stop_queues_by_reason(hw,
+ IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+ schedule_work(&local->restart_work);
+}
+EXPORT_SYMBOL(ieee80211_restart_hw);
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+ INIT_WORK(&local->restart_work, ieee80211_restart_work);
+
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
INIT_WORK(&local->dynamic_ps_disable_work,
return 0;
}
-int __ieee80211_resume(struct ieee80211_hw *hw)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_sub_if_data *sdata;
- struct ieee80211_if_init_conf conf;
- struct sta_info *sta;
- unsigned long flags;
- int res;
-
- /* restart hardware */
- if (local->open_count) {
- res = local->ops->start(hw);
-
- ieee80211_led_radio(local, hw->conf.radio_enabled);
- }
-
- /* add interfaces */
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_MONITOR &&
- netif_running(sdata->dev)) {
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->dev->dev_addr;
- res = local->ops->add_interface(hw, &conf);
- }
- }
-
- /* add STAs back */
- if (local->ops->sta_notify) {
- spin_lock_irqsave(&local->sta_lock, flags);
- list_for_each_entry(sta, &local->sta_list, list) {
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- sdata = container_of(sdata->bss,
- struct ieee80211_sub_if_data,
- u.ap);
-
- local->ops->sta_notify(hw, &sdata->vif,
- STA_NOTIFY_ADD, &sta->sta);
- }
- spin_unlock_irqrestore(&local->sta_lock, flags);
- }
-
- /* Clear Suspend state so that ADDBA requests can be processed */
-
- rcu_read_lock();
-
- if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
- clear_sta_flags(sta, WLAN_STA_SUSPEND);
- }
- }
-
- rcu_read_unlock();
-
- /* setup RTS threshold */
- if (local->ops->set_rts_threshold)
- local->ops->set_rts_threshold(hw, local->rts_threshold);
-
- /* reconfigure hardware */
- ieee80211_hw_config(local, ~0);
-
- netif_addr_lock_bh(local->mdev);
- ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
-
- /* Finally also reconfigure all the BSS information */
- list_for_each_entry(sdata, &local->interfaces, list) {
- u32 changed = ~0;
- if (!netif_running(sdata->dev))
- continue;
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_STATION:
- /* disable beacon change bits */
- changed &= ~IEEE80211_IFCC_BEACON;
- /* fall through */
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_MESH_POINT:
- WARN_ON(ieee80211_if_config(sdata, changed));
- ieee80211_bss_info_change_notify(sdata, ~0);
- break;
- case NL80211_IFTYPE_WDS:
- break;
- case NL80211_IFTYPE_AP_VLAN:
- case NL80211_IFTYPE_MONITOR:
- /* ignore virtual */
- break;
- case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
- WARN_ON(1);
- break;
- }
- }
-
- /* add back keys */
- list_for_each_entry(sdata, &local->interfaces, list)
- if (netif_running(sdata->dev))
- ieee80211_enable_keys(sdata);
-
- ieee80211_wake_queues_by_reason(hw,
- IEEE80211_QUEUE_STOP_REASON_SUSPEND);
-
- return 0;
-}
+/*
+ * __ieee80211_resume() is a static inline which just calls
+ * ieee80211_reconfig(), which is also needed for hardware
+ * hang/firmware failure/etc. recovery.
+ */
#include "rate.h"
#include "mesh.h"
#include "wme.h"
+#include "led.h"
/* privid for wiphys to determine whether they belong to us or not */
void *mac80211_wiphy_privid = &mac80211_wiphy_privid;
}
return supp_rates;
}
+
+int ieee80211_reconfig(struct ieee80211_local *local)
+{
+ struct ieee80211_hw *hw = &local->hw;
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_if_init_conf conf;
+ struct sta_info *sta;
+ unsigned long flags;
+ int res;
+
+ /* restart hardware */
+ if (local->open_count) {
+ res = local->ops->start(hw);
+
+ ieee80211_led_radio(local, hw->conf.radio_enabled);
+ }
+
+ /* add interfaces */
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+ sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+ netif_running(sdata->dev)) {
+ conf.vif = &sdata->vif;
+ conf.type = sdata->vif.type;
+ conf.mac_addr = sdata->dev->dev_addr;
+ res = local->ops->add_interface(hw, &conf);
+ }
+ }
+
+ /* add STAs back */
+ if (local->ops->sta_notify) {
+ spin_lock_irqsave(&local->sta_lock, flags);
+ list_for_each_entry(sta, &local->sta_list, list) {
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ sdata = container_of(sdata->bss,
+ struct ieee80211_sub_if_data,
+ u.ap);
+
+ local->ops->sta_notify(hw, &sdata->vif,
+ STA_NOTIFY_ADD, &sta->sta);
+ }
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+ }
+
+ /* Clear Suspend state so that ADDBA requests can be processed */
+
+ rcu_read_lock();
+
+ if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
+ list_for_each_entry_rcu(sta, &local->sta_list, list) {
+ clear_sta_flags(sta, WLAN_STA_SUSPEND);
+ }
+ }
+
+ rcu_read_unlock();
+
+ /* setup RTS threshold */
+ if (local->ops->set_rts_threshold)
+ local->ops->set_rts_threshold(hw, local->rts_threshold);
+
+ /* reconfigure hardware */
+ ieee80211_hw_config(local, ~0);
+
+ netif_addr_lock_bh(local->mdev);
+ ieee80211_configure_filter(local);
+ netif_addr_unlock_bh(local->mdev);
+
+ /* Finally also reconfigure all the BSS information */
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ u32 changed = ~0;
+ if (!netif_running(sdata->dev))
+ continue;
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_STATION:
+ /* disable beacon change bits */
+ changed &= ~IEEE80211_IFCC_BEACON;
+ /* fall through */
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ /*
+ * Driver's config_interface can fail if rfkill is
+ * enabled. Accommodate this return code.
+ * FIXME: When mac80211 has knowledge of rfkill
+ * state the code below can change back to:
+ * WARN(ieee80211_if_config(sdata, changed));
+ * ieee80211_bss_info_change_notify(sdata, ~0);
+ */
+ if (ieee80211_if_config(sdata, changed))
+ printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
+ sdata->dev->name);
+ else
+ ieee80211_bss_info_change_notify(sdata, ~0);
+ break;
+ case NL80211_IFTYPE_WDS:
+ break;
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_MONITOR:
+ /* ignore virtual */
+ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case __NL80211_IFTYPE_AFTER_LAST:
+ WARN_ON(1);
+ break;
+ }
+ }
+
+ /* add back keys */
+ list_for_each_entry(sdata, &local->interfaces, list)
+ if (netif_running(sdata->dev))
+ ieee80211_enable_keys(sdata);
+
+ ieee80211_wake_queues_by_reason(hw,
+ IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+ return 0;
+}