config COMEDI_DEBUG
bool "Comedi debugging"
depends on COMEDI != n
- help
+ ---help---
This is an option for use by developers; most people should
say N here. This enables comedi core and driver debugging.
-config COMEDI_PCI_DRIVERS
+menuconfig COMEDI_MISC_DRIVERS
+ tristate "Comedi misc drivers"
+ depends on COMEDI
+ default N
+ ---help---
+ Enable comedi misc drivers to be built
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about misc non-hardware comedi drivers.
+
+if COMEDI_MISC_DRIVERS
+
+config COMEDI_KCOMEDILIB
+ tristate "Comedi kcomedilib"
+ ---help---
+ Build the kcomedilib
+
+config COMEDI_BOND
+ tristate "Device bonding support"
+ depends on COMEDI_KCOMEDILIB
+ default N
+ ---help---
+ Enable support for a driver to 'bond' (merge) multiple subdevices
+ from multiple devices together as one.
+
+ To compile this driver as a module, choose M here: the module will be
+ called comedi_bond.
+
+config COMEDI_TEST
+ tristate "Fake waveform generator support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for the fake waveform generator.
+ This driver is mainly for testing purposes, but can also be used to
+ generate sample waveforms on systems that don't have data acquisition
+ hardware.
+
+ To compile this driver as a module, choose M here: the module will be
+ called comedi_test.
+
+config COMEDI_PARPORT
+ tristate "Parallel port support"
+ depends on PARPORT_PC
+ default N
+ ---help---
+ Enable support for the standard parallel port.
+ A cheap and easy way to get a few more digital I/O lines. Steal
+ additional parallel ports from old computers or your neighbors'
+ computers.
+
+ To compile this driver as a module, choose M here: the module will be
+ called comedi_parport.
+
+config COMEDI_SERIAL2002
+ tristate "Driver for serial connected hardware"
+ default N
+ ---help---
+ Enable support for serial connected hardware
+
+ To compile this driver as a module, choose M here: the module will be
+ called serial2002.
+
+config COMEDI_SKEL
+ tristate "Comedi skeleton driver"
+ default N
+ ---help---
+ Build the Skeleton driver, an example for driver writers
+
+ To compile this driver as a module, choose M here: the module will be
+ called skel.
+
+endif # COMEDI_MISC_DRIVERS
+
+menuconfig COMEDI_ISA_DRIVERS
+ tristate "Comedi ISA and PC/104 drivers"
+ depends on COMEDI && ISA
+ default N
+ ---help---
+ Enable comedi ISA and PC/104 drivers to be built
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about ISA and PC/104 comedi drivers.
+
+if COMEDI_ISA_DRIVERS && ISA
+
+config COMEDI_8255
+ tristate "Generic 8255 support"
+ default N
+ ---help---
+ Enable generic 8255 support.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 8255.
+
+config COMEDI_ACL7225B
+ tristate "ADlink NuDAQ ACL-7225b and compatibles support"
+ default N
+ ---help---
+ Enable support for ADlink NuDAQ ACL-7225b and compatibles,
+ ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
+
+ To compile this driver as a module, choose M here: the module will be
+ called acl7225b.
+
+config COMEDI_PCL711
+ tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
+ default N
+ ---help---
+ Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl711.
+
+config COMEDI_PCL724
+ tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
+ default N
+ ---help---
+ Enable support for Advantech PCL-724, PCL-722, PCL-731 and
+ ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl724.
+
+config COMEDI_PCL725
+ tristate "Advantech PCL-725 and compatible ISA card support"
+ default N
+ ---help---
+ Enable support for Advantech PCL-725 and compatible ISA cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl725.
+
+config COMEDI_PCL726
+ tristate "Advantech PCL-726 and compatible ISA card support"
+ default N
+ ---help---
+ Enable support for Advantech PCL-726 and compatible ISA cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl726.
+
+config COMEDI_PCL730
+ tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
+ default N
+ ---help---
+ Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
+ ACL-7130 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl730.
+
+config COMEDI_PCL812
+ tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+ default N
+ ---help---
+ Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
+ ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
+ A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl812.
+
+config COMEDI_PCL816
+ tristate "Advantech PCL-814 and PCL-816 ISA card support"
+ default N
+ ---help---
+ Enable support for Advantech PCL-814 and PCL-816 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl816.
+
+config COMEDI_PCL818
+ tristate "Advantech PCL-718 and PCL-818 ISA card support"
+ default N
+ ---help---
+ Enable support for Advantech PCL-818 ISA cards
+ PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcl818.
+
+config COMEDI_PCM3724
+ tristate "Advantech PCM-3724 PC/104 card support"
+ default N
+ ---help---
+ Enable support for Advantech PCM-3724 PC/104 cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcm3724.
+
+config COMEDI_PCM3730
+ tristate "Advantech PCM-3730 and clone PC/104 board support"
+ default N
+ ---help---
+ Enable support for Advantech PCM-3730 and clone PC/104 boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcm3730.
+
+config COMEDI_RTI800
+ tristate "Analog Devices RTI-800/815 ISA card support"
+ default N
+ ---help---
+ Enable support for Analog Devices RTI-800/815 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called rti800.
+
+config COMEDI_RTI802
+ tristate "Analog Devices RTI-802 ISA card support"
+ default N
+ ---help---
+ Enable support for Analog Devices RTI-802 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called rti802.
+
+config COMEDI_DAS08
+ tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support"
+ default N
+ ---help---
+ Enable support for Keithley Metrabyte/ComputerBoards DAS08
+ and compatible ISA and PC/104 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called das08.
+
+config COMEDI_DAS16M1
+ tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called das16m1.
+
+config COMEDI_DAS16
+ tristate "DAS-16 compatible ISA and PC/104 card support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for Keithley Metrabyte/ComputerBoards DAS16
+ and compatible ISA and PC/104 cards:
+ Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
+ DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
+ ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
+ PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
+ CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
+ CIO-DAS1602/16, CIO-DAS16/330
+
+ To compile this driver as a module, choose M here: the module will be
+ called das16.
+
+config COMEDI_DAS800
+ tristate "DAS800 and compatible ISA card support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
+ Keithley Metrabyte DAS-800, DAS-801, DAS-802
+ Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
+ CIO-DAS802/16
+
+ To compile this driver as a module, choose M here: the module will be
+ called das800.
+
+config COMEDI_DAS1800
+ tristate "DAS1800 and compatible ISA card support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for DAS1800 and compatible ISA cards
+ Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
+ DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
+ DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
+ DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
+ DAS-1802AO
+
+ To compile this driver as a module, choose M here: the module will be
+ called das1800.
+
+config COMEDI_DAS6402
+ tristate "DAS6402 and compatible ISA card support"
+ default N
+ ---help---
+ Enable support for DAS6402 and compatible ISA cards
+ Computerboards, Keithley Metrabyte DAS6402 and compatibles
+
+ To compile this driver as a module, choose M here: the module will be
+ called das6402.
+
+config COMEDI_DT2801
+ tristate "Data Translation DT2801 ISA card support"
+ default N
+ ---help---
+ Enable support for Data Translation DT2801 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt2801.
+
+config COMEDI_DT2811
+ tristate "Data Translation DT2811 ISA card support"
+ default N
+ ---help---
+ Enable support for Data Translation DT2811 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt2811.
+
+config COMEDI_DT2814
+ tristate "Data Translation DT2814 ISA card support"
+ default N
+ ---help---
+ Enable support for Data Translation DT2814 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt2814.
+
+config COMEDI_DT2815
+ tristate "Data Translation DT2815 ISA card support"
+ default N
+ ---help---
+ Enable support for Data Translation DT2815 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt2815.
+
+config COMEDI_DT2817
+ tristate "Data Translation DT2817 ISA card support"
+ default N
+ ---help---
+ Enable support for Data Translation DT2817 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt2817.
+
+config COMEDI_DT282X
+ tristate "Data Translation DT2821 series and DT-EZ ISA card support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for Data Translation DT2821 series including DT-EZ
+ DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
+ DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
+ DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt282x.
+
+config COMEDI_DMM32AT
+ tristate "Diamond Systems MM-32-AT PC/104 board support"
+ default N
+ ---help---
+ Enable support for Diamond Systems MM-32-AT PC/104 boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called dmm32at.
+
+config COMEDI_FL512
+ tristate "FL512 ISA card support"
+ default N
+ ---help---
+ Enable support for FL512 ISA card
+
+ To compile this driver as a module, choose M here: the module will be
+ called fl512.
+
+config COMEDI_AIO_AIO12_8
+ tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
+ default N
+ ---help---
+ Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
+
+ To compile this driver as a module, choose M here: the module will be
+ called aio_aio12_8.
+
+config COMEDI_AIO_IIRO_16
+ tristate "I/O Products PC/104 IIRO16 Board support"
+ default N
+ ---help---
+ Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
+ Input Board
+
+ To compile this driver as a module, choose M here: the module will be
+ called aio_iiro_16.
+
+config COMEDI_C6XDIGIO
+ tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
+ default N
+ ---help---
+ Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
+ card
+
+ To compile this driver as a module, choose M here: the module will be
+ called c6xdigio.
+
+config COMEDI_MPC624
+ tristate "Micro/sys MPC-624 PC/104 board support"
+ default N
+ ---help---
+ Enable support for Micro/sys MPC-624 PC/104 board
+
+ To compile this driver as a module, choose M here: the module will be
+ called mpc624.
+
+config COMEDI_ADQ12B
+ tristate "MicroAxial ADQ12-B data acquisition and control card support"
+ default N
+ ---help---
+ Enable MicroAxial ADQ12-B daq and control card support.
+
+ To compile this driver as a module, choose M here: the module will be
+ called adq12b.
+
+config COMEDI_NI_AT_A2150
+ tristate "NI AT-A2150 ISA card support"
+ depends on COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for National Instruments AT-A2150 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_at_a2150.
+
+config COMEDI_NI_AT_AO
+ tristate "NI AT-AO-6/10 EISA card support"
+ depends on COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for National Instruments AT-AO-6/10 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_at_ao.
+
+config COMEDI_NI_ATMIO
+ tristate "NI AT-MIO E series ISA-PNP card support"
+ depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for National Instruments AT-MIO E series cards
+ National Instruments AT-MIO-16E-1 (ni_atmio),
+ AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
+ AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_atmio.
+
+config COMEDI_NI_ATMIO16D
+ tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
+ depends on ISAPNP && COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_atmio16d.
+
+config COMEDI_PCMAD
+ tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
+ default N
+ ---help---
+ Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcmad.
+
+config COMEDI_PCMDA12
+ tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
+ default N
+ ---help---
+ Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
+ Note that the board is not ISA-PNP capable and thus needs the I/O
+ port comedi_config parameter.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcmda12.
+
+config COMEDI_PCMMIO
+ tristate "Winsystems PCM-MIO PC/104 board support"
+ default N
+ ---help---
+ Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcmmio.
+
+config COMEDI_PCMUIO
+ tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
+ default N
+ ---help---
+ Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcmuio.
+
+config COMEDI_MULTIQ3
+ tristate "Quanser Consulting MultiQ-3 ISA card support"
+ default N
+ ---help---
+ Enable support for Quanser Consulting MultiQ-3 ISA cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called multiq3.
+
+config COMEDI_POC
+ tristate "Generic driver for very simple devices"
+ default N
+ ---help---
+ Enable generic support for very simple / POC (Piece of Crap) boards,
+ Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
+ PCL-734 (pcl734)
+
+ To compile this driver as a module, choose M here: the module will be
+ called poc.
+
+endif # COMEDI_ISA_DRIVERS
+
+menuconfig COMEDI_PCI_DRIVERS
tristate "Comedi PCI drivers"
depends on COMEDI && PCI
default N
---help---
- Enable lots of comedi PCI drivers to be built
+ Enable comedi PCI drivers to be built
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about PCI comedi drivers.
+
+if COMEDI_PCI_DRIVERS && PCI
+
+config COMEDI_ADDI_APCI_035
+ tristate "ADDI-DATA APCI_035 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_035 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_035.
+
+config COMEDI_ADDI_APCI_1032
+ tristate "ADDI-DATA APCI_1032 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_1032 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_1032.
+
+config COMEDI_ADDI_APCI_1500
+ tristate "ADDI-DATA APCI_1500 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_1500 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_1500.
+
+config COMEDI_ADDI_APCI_1516
+ tristate "ADDI-DATA APCI_1516 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_1516 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_1516.
+
+config COMEDI_ADDI_APCI_1564
+ tristate "ADDI-DATA APCI_1564 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_1564 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_1564.
+
+config COMEDI_ADDI_APCI_16XX
+ tristate "ADDI-DATA APCI_16xx support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_16xx cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_16xx.
+
+config COMEDI_ADDI_APCI_2016
+ tristate "ADDI-DATA APCI_2016 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_2016 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_2016.
+
+config COMEDI_ADDI_APCI_2032
+ tristate "ADDI-DATA APCI_2032 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_2032 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_2032.
+
+config COMEDI_ADDI_APCI_2200
+ tristate "ADDI-DATA APCI_2200 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_2200 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_2200.
+
+config COMEDI_ADDI_APCI_3001
+ tristate "ADDI-DATA APCI_3001 support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_3001 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_3001.
+
+config COMEDI_ADDI_APCI_3120
+ tristate "ADDI-DATA APCI_3520 support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_3520 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_3120.
+
+config COMEDI_ADDI_APCI_3501
+ tristate "ADDI-DATA APCI_3501 support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_3501 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_3501.
+
+config COMEDI_ADDI_APCI_3XXX
+ tristate "ADDI-DATA APCI_3xxx support"
+ default N
+ ---help---
+ Enable support for ADDI-DATA APCI_3xxx cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called addi_apci_3xxx.
+
+config COMEDI_ADL_PCI6208
+ tristate "ADLink PCI-6208A support"
+ default N
+ ---help---
+ Enable support for ADLink PCI-6208A cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci6208.
+
+config COMEDI_ADL_PCI7230
+ tristate "ADLink PCI-7230 digital io board support"
+ default N
+ ---help---
+ Enable support for ADlink PCI-7230 digital io board support
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci7230.
+
+config COMEDI_ADL_PCI7296
+ tristate "ADLink PCI-7296 96 ch. digital io board support"
+ default N
+ ---help---
+ Enable support for ADlink PCI-7296 96 ch. digital io board support
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci7296.
+
+config COMEDI_ADL_PCI7432
+ tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
+ default N
+ ---help---
+ Enable support for ADlink PCI-7432 64 ch. isolated digital io board
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci7432.
+
+config COMEDI_ADL_PCI8164
+ tristate "ADLink PCI-8164 4 Axes Motion Control board support"
+ default N
+ ---help---
+ Enable support for ADlink PCI-8164 4 Axes Motion Control board
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci8164.
+
+config COMEDI_ADL_PCI9111
+ tristate "ADLink PCI-9111HR support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for ADlink PCI9111 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci9111.
+
+config COMEDI_ADL_PCI9118
+ tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called adl_pci9118.
+
+config COMEDI_ADV_PCI1710
+ tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
+ default N
+ ---help---
+ Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
+ PCI-1713, PCI-1720 and PCI-1731
+
+ To compile this driver as a module, choose M here: the module will be
+ called adv_pci1710.
+
+config COMEDI_ADV_PCI1723
+ tristate "Advantech PCI-1723 support"
+ default N
+ ---help---
+ Enable support for Advantech PCI-1723 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called adv_pci1723.
+
+config COMEDI_ADV_PCI_DIO
+ tristate "Advantech PCI DIO card support"
+ default N
+ ---help---
+ Enable support for Advantech PCI DIO cards
+ PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751,
+ PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762
+
+ To compile this driver as a module, choose M here: the module will be
+ called adv_pci_dio.
+
+config COMEDI_AMPLC_DIO200
+ tristate "Amplicon PC272E and PCI272 DIO board support"
+ default N
+ ---help---
+ Enable support for Amplicon PC272E and PCI272 DIO boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called amplc_dio200.
+
+config COMEDI_AMPLC_PC236
+ tristate "Amplicon PC36AT and PCI236 DIO board support"
+ default N
+ ---help---
+ Enable support for Amplicon PC36AT and PCI236 DIO boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called amplc_pc236.
+
+config COMEDI_AMPLC_PC263
+ tristate "Amplicon PC263 and PCI263 relay board support"
+ default N
+ ---help---
+ Enable support for Amplicon PC263 and PCI263 relay boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called amplc_pc263.
+
+config COMEDI_AMPLC_PCI224
+ tristate "Amplicon PCI224 and PCI234 support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for Amplicon PCI224 and PCI234 AO boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called amplc_pci224.
+
+config COMEDI_AMPLC_PCI230
+ tristate "Amplicon PCI230 and PCI260 support"
+ default N
+ ---help---
+ Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
+ boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called amplc_pci230.
+
+config COMEDI_CONTEC_PCI_DIO
+ tristate "Contec PIO1616L digital I/O board support"
+ default N
+ ---help---
+ Enable support for the Contec PIO1616L digital I/O board
+
+ To compile this driver as a module, choose M here: the module will be
+ called contec_pci_dio.
+
+config COMEDI_DT3000
+ tristate "Data Translation DT3000 series support"
+ default N
+ ---help---
+ Enable support for Data Translation DT3000 series
+ DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
+ DT3004-200
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt3000.
+
+config COMEDI_UNIOXX5
+ tristate "Fastwel UNIOxx-5 analog and digital io board support"
+ default N
+ ---help---
+ Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called unioxx5.
+
+config COMEDI_GSC_HPDI
+ tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for General Standards Corporation high speed parallel
+ digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
+ Only receive mode works, transmit not supported.
+
+ To compile this driver as a module, choose M here: the module will be
+ called gsc_hpdi.
+
+config COMEDI_ICP_MULTI
+ tristate "Inova ICP_MULTI support"
+ default N
+ ---help---
+ Enable support for Inova ICP_MULTI card
+
+ To compile this driver as a module, choose M here: the module will be
+ called icp_multi.
+
+config COMEDI_II_PCI20KC
+ tristate "Intelligent Instruments PCI-20001C carrier support"
+ default N
+ ---help---
+ Enable support for Intelligent Instruments PCI-20001C carrier
+ PCI-20001, PCI-20006 and PCI-20341
+
+ To compile this driver as a module, choose M here: the module will be
+ called ii_pci20kc.
+
+config COMEDI_DAQBOARD2000
+ tristate "IOtech DAQboard/2000 support"
+ default N
+ ---help---
+ Enable support for the IOtech DAQboard/2000
+
+ To compile this driver as a module, choose M here: the module will be
+ called daqboard2000.
+
+config COMEDI_JR3_PCI
+ tristate "JR3/PCI force sensor board support"
+ default N
+ ---help---
+ Enable support for JR3/PCI force sensor boards
+
+ To compile this driver as a module, choose M here: the module will be
+ called jr3_pci.
+
+config COMEDI_KE_COUNTER
+ tristate "Kolter-Electronic PCI Counter 1 card support"
+ default N
+ ---help---
+ Enable support for Kolter-Electronic PCI Counter 1 cards
+
+ To compile this driver as a module, choose M here: the module will be
+ called ke_counter.
+
+config COMEDI_CB_PCIDAS64
+ tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
+ 60xx, and 4020 series with the PLX 9080 PCI controller
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_pcidas64.
+
+config COMEDI_CB_PCIDAS
+ tristate "MeasurementComputing PCI-DAS support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
+ AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
+ PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
+ and PCI_DAS1002.
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_pcidas.
+
+config COMEDI_CB_PCIDDA
+ tristate "MeasurementComputing PCI-DDA series support"
+ default N
+ ---help---
+ Enable support for ComputerBoards/MeasurementComputing PCI-DDA
+ series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
+ PCI-DDA04/16 and PCI-DDA02/16
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_pcidda.
+
+config COMEDI_CB_PCIDIO
+ tristate "MeasurementComputing PCI-DIO series support"
+ default N
+ ---help---
+ Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
+ PCI-DIO24, PCI-DIO24H and PCI-DIO48H
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_pcidio.
+
+config COMEDI_CB_PCIMDAS
+ tristate "MeasurementComputing PCIM-DAS1602/16 support"
+ default N
+ ---help---
+ Enable support for ComputerBoards/MeasurementComputing PCI Migration
+ series PCIM-DAS1602/16
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_pcimdas.
-config COMEDI_PCMCIA_DRIVERS
+config COMEDI_CB_PCIMDDA
+ tristate "MeasurementComputing PCIM-DDA06-16 support"
+ default N
+ ---help---
+ Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_pcimdda.
+
+config COMEDI_ME4000
+ tristate "Meilhaus ME-4000 support"
+ default N
+ ---help---
+ Enable support for Meilhaus PCI data acquisition cards
+ ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
+
+ To compile this driver as a module, choose M here: the module will be
+ called me4000.
+
+config COMEDI_ME_DAQ
+ tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
+ default N
+ ---help---
+ Enable support for Meilhaus PCI data acquisition cards
+ ME-2000i, ME-2600i and ME-3000vm1
+
+ To compile this driver as a module, choose M here: the module will be
+ called me_daq.
+
+config COMEDI_NI_6527
+ tristate "NI 6527 support"
+ depends on COMEDI_MITE
+ default N
+ ---help---
+ Enable support for the National Instruments 6527 PCI card
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_6527.
+
+config COMEDI_NI_65XX
+ tristate "NI 65xx static dio PCI card support"
+ depends on COMEDI_MITE
+ default N
+ ---help---
+ Enable support for National Instruments 65xx static dio boards.
+ Supported devices: National Instruments PCI-6509 (ni_65xx),
+ PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
+ PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
+ PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_65xx.
+
+config COMEDI_NI_660X
+ tristate "NI 660x counter/timer PCI card support"
+ depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
+ PXI-6602 and PXI-6608.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_660x.
+
+config COMEDI_NI_670X
+ tristate "NI 670x PCI card support"
+ depends on COMEDI_MITE
+ default N
+ ---help---
+ Enable support for National Instruments PCI-6703 and PCI-6704
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_670x.
+
+config COMEDI_NI_PCIDIO
+ tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
+ depends on COMEDI_MITE
+ default N
+ ---help---
+ Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
+ PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
+ PXI-6503, PCI-6533 and PCI-6534
+ The DIO-96 appears as four 8255 subdevices. See the 8255
+ driver notes for details.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_pcidio.
+
+config COMEDI_NI_PCIMIO
+ tristate "NI PCI-MIO-E series and M series support"
+ depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for National Instruments PCI-MIO-E series and M series
+ (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
+ PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
+ PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
+ PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
+ PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
+ PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
+ PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
+ PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
+ PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_pcimio.
+
+config COMEDI_RTD520
+ tristate "Real Time Devices PCI4520/DM7520 support"
+ default N
+ ---help---
+ Enable support for Real Time Devices PCI4520/DM7520
+
+ To compile this driver as a module, choose M here: the module will be
+ called rtd520.
+
+config COMEDI_S526
+ tristate "Sensoray s526 support"
+ default N
+ ---help---
+ Enable support for Sensoray s526
+
+ To compile this driver as a module, choose M here: the module will be
+ called s526.
+
+config COMEDI_S626
+ tristate "Sensoray 626 support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for Sensoray 626
+
+ To compile this driver as a module, choose M here: the module will be
+ called s626.
+
+config COMEDI_SSV_DNP
+ tristate "SSV Embedded Systems DIL/Net-PC support"
+ default N
+ ---help---
+ Enable support for SSV Embedded Systems DIL/Net-PC
+
+ To compile this driver as a module, choose M here: the module will be
+ called ssv_dnp.
+
+endif # COMEDI_PCI_DRIVERS
+
+menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
depends on COMEDI && PCMCIA && PCCARD
default N
---help---
- Enable lots of comedi PCMCIA and PCCARD drivers to be built
+ Enable comedi PCMCIA and PCCARD drivers to be built
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about PCMCIA comedi drivers.
+
+if COMEDI_PCMCIA_DRIVERS && PCMCIA
+
+config COMEDI_CB_DAS16_CS
+ tristate "CB DAS16 series PCMCIA support"
+ default N
+ ---help---
+ Enable support for the ComputerBoards/MeasurementComputing PCMCIA
+ cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
+
+ To compile this driver as a module, choose M here: the module will be
+ called cb_das16_cs.
+
+config COMEDI_DAS08_CS
+ tristate "CB DAS08 PCMCIA support"
+ select COMEDI_DAS08
+ default N
+ ---help---
+ Enable support for the ComputerBoards/MeasurementComputing DAS-08
+ PCMCIA card
+
+ To compile this driver as a module, choose M here: the module will be
+ called das08_cs.
-config COMEDI_USB_DRIVERS
+config COMEDI_NI_DAQ_700_CS
+ tristate "NI DAQCard-700 PCMCIA support"
+ depends on COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for the National Instruments PCMCIA DAQCard-700 DIO
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_daq_700.
+
+config COMEDI_NI_DAQ_DIO24_CS
+ tristate "NI DAQ-Card DIO-24 PCMCIA support"
+ depends on COMEDI_NI_COMMON
+ default N
+ ---help---
+ Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_daq_dio24.
+
+config COMEDI_NI_LABPC_CS
+ tristate "NI DAQCard-1200 PCMCIA support"
+ depends on COMEDI_NI_LABPC
+ default N
+ ---help---
+ Enable support for the National Instruments PCMCIA DAQCard-1200
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_labpc_cs.
+
+config COMEDI_NI_MIO_CS
+ tristate "NI DAQCard E series PCMCIA support"
+ depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
+ default N
+ select COMEDI_FC
+ ---help---
+ Enable support for the National Instruments PCMCIA DAQCard E series
+ DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
+ and DAQCard-6036E
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_mio_cs.
+
+config COMEDI_QUATECH_DAQP_CS
+ tristate "Quatech DAQP PCMCIA data capture card support"
+ default N
+ ---help---
+ Enable support for the Quatech DAQP PCMCIA data capture cards
+ DAQP-208 and DAQP-308
+
+ To compile this driver as a module, choose M here: the module will be
+ called quatech_daqp_cs.
+
+endif # COMEDI_PCMCIA_DRIVERS
+
+menuconfig COMEDI_USB_DRIVERS
tristate "Comedi USB drivers"
depends on COMEDI && USB
default N
---help---
- Enable lots of comedi USB drivers to be built
+ Enable comedi USB drivers to be built
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about USB comedi drivers.
+
+if COMEDI_USB_DRIVERS && USB
+
+config COMEDI_DT9812
+ tristate "DataTranslation DT9812 USB module support"
+ default N
+ ---help---
+ Enable support for the Data Translation DT9812 USB module
+
+ To compile this driver as a module, choose M here: the module will be
+ called dt9812.
+
+config COMEDI_USBDUX
+ tristate "ITL USBDUX support"
+ default N
+ ---help---
+ Enable support for the University of Stirling USB DAQ and INCITE
+ Technology Limited driver
+
+ To compile this driver as a module, choose M here: the module will be
+ called usbdux.
+
+config COMEDI_USBDUXFAST
+ tristate "ITL USB-DUXfast support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for the University of Stirling USB-DUXfast and INCITE
+ Technology Limited driver
+
+ To compile this driver as a module, choose M here: the module will be
+ called usbduxfast.
+
+config COMEDI_VMK80XX
+ tristate "Velleman VM110/VM140 USB Board support"
+ default N
+ ---help---
+ Build the Velleman USB Board Low-Level Driver supporting the
+ K8055/K8061 aka VM110/VM140 devices
+
+ To compile this driver as a module, choose M here: the module will be
+ called vmk80xx.
+
+endif # COMEDI_USB_DRIVERS
+
+menuconfig COMEDI_NI_COMMON
+ tristate "Comedi National Instruments card support"
+ depends on COMEDI
+ default N
+ ---help---
+ Enable comedi support for National Instruments cards.
+ Modules in this section are used by many comedi NI drivers.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about National Instruments cards.
+
+if COMEDI_NI_COMMON
+
+config COMEDI_MITE
+ tristate "NI Mite PCI interface chip support"
+ depends on PCI
+ default N
+ ---help---
+ Enable support for National Instruments Mite PCI interface chip
+
+ To compile this driver as a module, choose M here: the module will be
+ called mite.
+
+config COMEDI_NI_TIO
+ tristate "NI general purpose counter support"
+ depends on COMEDI_MITE
+ default N
+ ---help---
+ Enable support for National Instruments general purpose counters.
+ This module is not used directly by end-users. Rather, it
+ is used by other drivers (for example ni_660x and ni_pcimio)
+ to provide support for NI's general purpose counters.
+
+ To compile this driver as a modules, choose M here: two modules will
+ be build: ni_tio and ni_tiocmd.
+
+config COMEDI_NI_LABPC
+ tristate "NI Lab-PC and compatibles ISA and PCI support"
+ select COMEDI_FC
+ default N
+ ---help---
+ Enable support for National Instruments Lab-PC and compatibles
+ Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
+ Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
+ not yet been added to the driver.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni_labpc.
+
+endif # COMEDI_NI_COMMON
+
+config COMEDI_FC
+ tristate "Comedi shared functions for low-level driver support"
+ default N
+ ---help---
+ Enable support for shared functions for low-level drivers.
+ This module is not used directly by end-users. Rather, it
+ is used by many other comedi drivers.
+
+ To compile this driver as a module, choose M here: the module will be
+ called comedi_fc.
#
# Comedi "helper" modules
-obj-$(CONFIG_COMEDI) += comedi_fc.o
-obj-$(CONFIG_COMEDI) += comedi_bond.o
-obj-$(CONFIG_COMEDI) += comedi_test.o
-obj-$(CONFIG_COMEDI) += comedi_parport.o
obj-$(CONFIG_COMEDI) += pcm_common.o
+# Comedi misc drivers
+obj-$(CONFIG_COMEDI_BOND) += comedi_bond.o
+obj-$(CONFIG_COMEDI_TEST) += comedi_test.o
+obj-$(CONFIG_COMEDI_PARPORT) += comedi_parport.o
+obj-$(CONFIG_COMEDI_SERIAL2002) += serial2002.o
+obj-$(CONFIG_COMEDI_SKEL) += skel.o
+
+# Comedi ISA drivers
+obj-$(CONFIG_COMEDI_8255) += 8255.o
+obj-$(CONFIG_COMEDI_ACL7225B) += acl7225b.o
+obj-$(CONFIG_COMEDI_PCL711) += pcl711.o
+obj-$(CONFIG_COMEDI_PCL724) += pcl724.o
+obj-$(CONFIG_COMEDI_PCL725) += pcl725.o
+obj-$(CONFIG_COMEDI_PCL726) += pcl726.o
+obj-$(CONFIG_COMEDI_PCL730) += pcl730.o
+obj-$(CONFIG_COMEDI_PCL812) += pcl812.o
+obj-$(CONFIG_COMEDI_PCL816) += pcl816.o
+obj-$(CONFIG_COMEDI_PCL818) += pcl818.o
+obj-$(CONFIG_COMEDI_PCM3724) += pcm3724.o
+obj-$(CONFIG_COMEDI_PCM3730) += pcm3730.o
+obj-$(CONFIG_COMEDI_RTI800) += rti800.o
+obj-$(CONFIG_COMEDI_RTI802) += rti802.o
+obj-$(CONFIG_COMEDI_DAS08) += das08.o
+obj-$(CONFIG_COMEDI_DAS16M1) += das16m1.o
+obj-$(CONFIG_COMEDI_DAS16) += das16.o
+obj-$(CONFIG_COMEDI_DAS800) += das800.o
+obj-$(CONFIG_COMEDI_DAS1800) += das1800.o
+obj-$(CONFIG_COMEDI_DAS6402) += das6402.o
+obj-$(CONFIG_COMEDI_DT2801) += dt2801.o
+obj-$(CONFIG_COMEDI_DT2811) += dt2811.o
+obj-$(CONFIG_COMEDI_DT2814) += dt2814.o
+obj-$(CONFIG_COMEDI_DT2815) += dt2815.o
+obj-$(CONFIG_COMEDI_DT2817) += dt2817.o
+obj-$(CONFIG_COMEDI_DT282X) += dt282x.o
+obj-$(CONFIG_COMEDI_DMM32AT) += dmm32at.o
+obj-$(CONFIG_COMEDI_FL512) += fl512.o
+obj-$(CONFIG_COMEDI_AIO_AIO12_8) += aio_aio12_8.o
+obj-$(CONFIG_COMEDI_AIO_IIRO_16) += aio_iiro_16.o
+obj-$(CONFIG_COMEDI_C6XDIGIO) += c6xdigio.o
+obj-$(CONFIG_COMEDI_MPC624) += mpc624.o
+obj-$(CONFIG_COMEDI_ADQ12B) += adq12b.o
+obj-$(CONFIG_COMEDI_NI_AT_A2150) += ni_at_a2150.o
+obj-$(CONFIG_COMEDI_NI_AT_AO) += ni_at_ao.o
+obj-$(CONFIG_COMEDI_NI_ATMIO) += ni_atmio.o
+obj-$(CONFIG_COMEDI_NI_ATMIO16D) += ni_atmio16d.o
+obj-$(CONFIG_COMEDI_PCMAD) += pcmad.o
+obj-$(CONFIG_COMEDI_PCMDA12) += pcmda12.o
+obj-$(CONFIG_COMEDI_PCMMIO) += pcmmio.o
+obj-$(CONFIG_COMEDI_PCMUIO) += pcmuio.o
+obj-$(CONFIG_COMEDI_MULTIQ3) += multiq3.o
+obj-$(CONFIG_COMEDI_POC) += poc.o
+
# Comedi PCI drivers
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += 8255.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += acl7225b.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_035.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_1032.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_1500.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_1516.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_1564.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_16xx.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_2016.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_2032.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_2200.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_3001.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_3120.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_3501.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += addi_apci_3xxx.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci6208.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci7230.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci7296.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci7432.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci8164.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci9111.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adl_pci9118.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adq12b.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adv_pci1710.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adv_pci1723.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += adv_pci_dio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += aio_aio12_8.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += aio_iiro_16.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += amplc_dio200.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += amplc_pc236.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += amplc_pc263.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += amplc_pci224.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += amplc_pci230.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += c6xdigio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += cb_pcidas64.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += cb_pcidas.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += cb_pcidda.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += cb_pcidio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += cb_pcimdas.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += cb_pcimdda.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += comedi_bond.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += comedi_parport.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += comedi_test.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += contec_pci_dio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += daqboard2000.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += das08.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += das16m1.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += das16.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += das1800.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += das6402.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += das800.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dmm32at.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt2801.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt2811.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt2814.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt2815.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt2817.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt282x.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += dt3000.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += fl512.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += gsc_hpdi.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += icp_multi.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ii_pci20kc.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += jr3_pci.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ke_counter.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += me4000.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += me_daq.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += mite.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += mpc624.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += multiq3.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_6527.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_65xx.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_660x.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_670x.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_at_a2150.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_at_ao.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_atmio16d.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_atmio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_labpc.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_pcidio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_pcimio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_tiocmd.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ni_tio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl711.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl724.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl725.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl726.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl730.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl812.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl816.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcl818.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcm3724.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcm3730.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcmad.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcmda12.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcmmio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += pcmuio.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += poc.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += rtd520.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += rti800.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += rti802.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += s526.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += s626.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += serial2002.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += skel.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += ssv_dnp.o
-obj-$(CONFIG_COMEDI_PCI_DRIVERS) += unioxx5.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_035) += addi_apci_035.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_1032) += addi_apci_1032.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_1500) += addi_apci_1500.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_1516) += addi_apci_1516.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_1564) += addi_apci_1564.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_16XX) += addi_apci_16xx.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_2016) += addi_apci_2016.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_2032) += addi_apci_2032.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_2200) += addi_apci_2200.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_3001) += addi_apci_3001.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_3120) += addi_apci_3120.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_3501) += addi_apci_3501.o
+obj-$(CONFIG_COMEDI_ADDI_APCI_3XXX) += addi_apci_3xxx.o
+obj-$(CONFIG_COMEDI_ADL_PCI6208) += adl_pci6208.o
+obj-$(CONFIG_COMEDI_ADL_PCI7230) += adl_pci7230.o
+obj-$(CONFIG_COMEDI_ADL_PCI7296) += adl_pci7296.o
+obj-$(CONFIG_COMEDI_ADL_PCI7432) += adl_pci7432.o
+obj-$(CONFIG_COMEDI_ADL_PCI8164) += adl_pci8164.o
+obj-$(CONFIG_COMEDI_ADL_PCI9111) += adl_pci9111.o
+obj-$(CONFIG_COMEDI_ADL_PCI9118) += adl_pci9118.o
+obj-$(CONFIG_COMEDI_ADV_PCI1710) += adv_pci1710.o
+obj-$(CONFIG_COMEDI_ADV_PCI1723) += adv_pci1723.o
+obj-$(CONFIG_COMEDI_ADV_PCI_DIO) += adv_pci_dio.o
+obj-$(CONFIG_COMEDI_AMPLC_DIO200) += amplc_dio200.o
+obj-$(CONFIG_COMEDI_AMPLC_PC236) += amplc_pc236.o
+obj-$(CONFIG_COMEDI_AMPLC_PC263) += amplc_pc263.o
+obj-$(CONFIG_COMEDI_AMPLC_PCI224) += amplc_pci224.o
+obj-$(CONFIG_COMEDI_AMPLC_PCI230) += amplc_pci230.o
+obj-$(CONFIG_COMEDI_CONTEC_PCI_DIO) += contec_pci_dio.o
+obj-$(CONFIG_COMEDI_DT3000) += dt3000.o
+obj-$(CONFIG_COMEDI_UNIOXX5) += unioxx5.o
+obj-$(CONFIG_COMEDI_GSC_HPDI) += gsc_hpdi.o
+obj-$(CONFIG_COMEDI_ICP_MULTI) += icp_multi.o
+obj-$(CONFIG_COMEDI_II_PCI20KC) += ii_pci20kc.o
+obj-$(CONFIG_COMEDI_DAQBOARD2000) += daqboard2000.o
+obj-$(CONFIG_COMEDI_JR3_PCI) += jr3_pci.o
+obj-$(CONFIG_COMEDI_KE_COUNTER) += ke_counter.o
+obj-$(CONFIG_COMEDI_CB_PCIDAS64) += cb_pcidas64.o
+obj-$(CONFIG_COMEDI_CB_PCIDAS) += cb_pcidas.o
+obj-$(CONFIG_COMEDI_CB_PCIDDA) += cb_pcidda.o
+obj-$(CONFIG_COMEDI_CB_PCIDIO) += cb_pcidio.o
+obj-$(CONFIG_COMEDI_CB_PCIMDAS) += cb_pcimdas.o
+obj-$(CONFIG_COMEDI_CB_PCIMDDA) += cb_pcimdda.o
+obj-$(CONFIG_COMEDI_ME4000) += me4000.o
+obj-$(CONFIG_COMEDI_ME_DAQ) += me_daq.o
+obj-$(CONFIG_COMEDI_NI_6527) += ni_6527.o
+obj-$(CONFIG_COMEDI_NI_65XX) += ni_65xx.o
+obj-$(CONFIG_COMEDI_NI_660X) += ni_660x.o
+obj-$(CONFIG_COMEDI_NI_670X) += ni_670x.o
+obj-$(CONFIG_COMEDI_NI_PCIDIO) += ni_pcidio.o
+obj-$(CONFIG_COMEDI_NI_PCIMIO) += ni_pcimio.o
+obj-$(CONFIG_COMEDI_RTD520) += rtd520.o
+obj-$(CONFIG_COMEDI_S526) += s526.o
+obj-$(CONFIG_COMEDI_S626) += s626.o
+obj-$(CONFIG_COMEDI_SSV_DNP) += ssv_dnp.o
# Comedi PCMCIA drivers
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += cb_das16_cs.o
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += das08_cs.o
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += ni_daq_700.o
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += ni_daq_dio24.o
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += ni_labpc_cs.o
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += ni_mio_cs.o
-obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS) += quatech_daqp_cs.o
+obj-$(CONFIG_COMEDI_CB_DAS16_CS) += cb_das16_cs.o
+obj-$(CONFIG_COMEDI_DAS08_CS) += das08_cs.o
+obj-$(CONFIG_COMEDI_NI_DAQ_700_CS) += ni_daq_700.o
+obj-$(CONFIG_COMEDI_NI_DAQ_DIO24_CS) += ni_daq_dio24.o
+obj-$(CONFIG_COMEDI_NI_LABPC_CS) += ni_labpc_cs.o
+obj-$(CONFIG_COMEDI_NI_MIO_CS) += ni_mio_cs.o
+obj-$(CONFIG_COMEDI_QUATECH_DAQP_CS) += quatech_daqp_cs.o
# Comedi USB drivers
-obj-$(CONFIG_COMEDI_USB_DRIVERS) += dt9812.o
-obj-$(CONFIG_COMEDI_USB_DRIVERS) += usbdux.o
-obj-$(CONFIG_COMEDI_USB_DRIVERS) += usbduxfast.o
-obj-$(CONFIG_COMEDI_USB_DRIVERS) += vmk80xx.o
+obj-$(CONFIG_COMEDI_DT9812) += dt9812.o
+obj-$(CONFIG_COMEDI_USBDUX) += usbdux.o
+obj-$(CONFIG_COMEDI_USBDUXFAST) += usbduxfast.o
+obj-$(CONFIG_COMEDI_VMK80XX) += vmk80xx.o
+
+# Comedi NI drivers
+obj-$(CONFIG_COMEDI_MITE) += mite.o
+obj-$(CONFIG_COMEDI_NI_TIO) += ni_tio.o
+obj-$(CONFIG_COMEDI_NI_TIO) += ni_tiocmd.o
+obj-$(CONFIG_COMEDI_NI_LABPC) += ni_labpc.o
+obj-$(CONFIG_COMEDI_FC) += comedi_fc.o
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff