u32 intr_tcpip_err_count;
};
+/**
+ * struct pch_gbe_privdata - PCI Device ID driver data
+ * @phy_tx_clk_delay: Bool, configure the PHY TX delay in software
+ * @phy_disable_hibernate: Bool, disable PHY hibernation
+ * @platform_init: Platform initialization callback, called from
+ * probe, prior to PHY initialization.
+ */
+struct pch_gbe_privdata {
+ bool phy_tx_clk_delay;
+ bool phy_disable_hibernate;
+ int (*platform_init)(struct pci_dev *pdev);
+};
+
/**
* struct pch_gbe_adapter - board specific private data structure
* @stats_lock: Spinlock structure for status
* @rx_buffer_len: Receive buffer length
* @tx_queue_len: Transmit queue length
* @have_msi: PCI MSI mode flag
+ * @pch_gbe_privdata: PCI Device ID driver_data
*/
struct pch_gbe_adapter {
int hwts_tx_en;
int hwts_rx_en;
struct pci_dev *ptp_pdev;
+ struct pch_gbe_privdata *pdata;
};
#define pch_gbe_hw_to_adapter(hw) container_of(hw, struct pch_gbe_adapter, hw)
#include <linux/module.h>
#include <linux/net_tstamp.h>
#include <linux/ptp_classify.h>
+#include <linux/gpio.h>
#define DRV_VERSION "1.01"
const char pch_driver_version[] = DRV_VERSION;
#define PTP_L4_MULTICAST_SA "01:00:5e:00:01:81"
#define PTP_L2_MULTICAST_SA "01:1b:19:00:00:00"
+#define MINNOW_PHY_RESET_GPIO 13
+
static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
adapter->pdev = pdev;
adapter->hw.back = adapter;
adapter->hw.reg = pcim_iomap_table(pdev)[PCH_GBE_PCI_BAR];
+ adapter->pdata = (struct pch_gbe_privdata *)pci_id->driver_data;
+ if (adapter->pdata && adapter->pdata->platform_init)
+ adapter->pdata->platform_init(pdev);
adapter->ptp_pdev = pci_get_bus_and_slot(adapter->pdev->bus->number,
PCI_DEVFN(12, 4));
dev_dbg(&pdev->dev, "PCH Network Connection\n");
+ /* Disable hibernation on certain platforms */
+ if (adapter->pdata && adapter->pdata->phy_disable_hibernate)
+ pch_gbe_phy_disable_hibernate(&adapter->hw);
+
device_set_wakeup_enable(&pdev->dev, 1);
return 0;
return ret;
}
+/* The AR803X PHY on the MinnowBoard requires a physical pin to be toggled to
+ * ensure it is awake for probe and init. Request the line and reset the PHY.
+ */
+static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
+{
+ unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT;
+ unsigned gpio = MINNOW_PHY_RESET_GPIO;
+ int ret;
+
+ ret = devm_gpio_request_one(&pdev->dev, gpio, flags,
+ "minnow_phy_reset");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "ERR: Can't request PHY reset GPIO line '%d'\n", gpio);
+ return ret;
+ }
+
+ gpio_set_value(gpio, 0);
+ usleep_range(1250, 1500);
+ gpio_set_value(gpio, 1);
+ usleep_range(1250, 1500);
+
+ return ret;
+}
+
+static struct pch_gbe_privdata pch_gbe_minnow_privdata = {
+ .phy_tx_clk_delay = true,
+ .phy_disable_hibernate = true,
+ .platform_init = pch_gbe_minnow_platform_init,
+};
+
static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = {
+ {.vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_IOH1_GBE,
+ .subvendor = PCI_VENDOR_ID_CIRCUITCO,
+ .subdevice = PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD,
+ .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
+ .class_mask = (0xFFFF00),
+ .driver_data = (kernel_ulong_t)&pch_gbe_minnow_privdata
+ },
{.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_IOH1_GBE,
.subvendor = PCI_ANY_ID,
#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+/* AR8031 PHY Debug Registers */
+#define PHY_AR803X_ID 0x00001374
+#define PHY_AR8031_DBG_OFF 0x1D
+#define PHY_AR8031_DBG_DAT 0x1E
+#define PHY_AR8031_SERDES 0x05
+#define PHY_AR8031_HIBERNATE 0x0B
+#define PHY_AR8031_SERDES_TX_CLK_DLY 0x0100 /* TX clock delay of 2.0ns */
+#define PHY_AR8031_PS_HIB_EN 0x8000 /* Hibernate enable */
+
/* Phy Id Register (word 2) */
#define PHY_REVISION_MASK 0x000F
pch_gbe_phy_sw_reset(hw);
}
+/**
+ * pch_gbe_phy_tx_clk_delay - Setup TX clock delay via the PHY
+ * @hw: Pointer to the HW structure
+ * Returns
+ * 0: Successful.
+ * -EINVAL: Invalid argument.
+ */
+static int pch_gbe_phy_tx_clk_delay(struct pch_gbe_hw *hw)
+{
+ /* The RGMII interface requires a ~2ns TX clock delay. This is typically
+ * done in layout with a longer trace or via PHY strapping, but can also
+ * be done via PHY configuration registers.
+ */
+ struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+ u16 mii_reg;
+ int ret = 0;
+
+ switch (hw->phy.id) {
+ case PHY_AR803X_ID:
+ netdev_dbg(adapter->netdev,
+ "Configuring AR803X PHY for 2ns TX clock delay\n");
+ pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_OFF, &mii_reg);
+ ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_OFF,
+ PHY_AR8031_SERDES);
+ if (ret)
+ break;
+
+ pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_DAT, &mii_reg);
+ mii_reg |= PHY_AR8031_SERDES_TX_CLK_DLY;
+ ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_DAT,
+ mii_reg);
+ break;
+ default:
+ netdev_err(adapter->netdev,
+ "Unknown PHY (%x), could not set TX clock delay\n",
+ hw->phy.id);
+ return -EINVAL;
+ }
+
+ if (ret)
+ netdev_err(adapter->netdev,
+ "Could not configure tx clock delay for PHY\n");
+ return ret;
+}
+
/**
* pch_gbe_phy_init_setting - PHY initial setting
* @hw: Pointer to the HW structure
pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);
+
+ /* Setup a TX clock delay on certain platforms */
+ if (adapter->pdata && adapter->pdata->phy_tx_clk_delay)
+ pch_gbe_phy_tx_clk_delay(hw);
+}
+
+/**
+ * pch_gbe_phy_disable_hibernate - Disable the PHY low power state
+ * @hw: Pointer to the HW structure
+ * Returns
+ * 0: Successful.
+ * -EINVAL: Invalid argument.
+ */
+int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw)
+{
+ struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+ u16 mii_reg;
+ int ret = 0;
+
+ switch (hw->phy.id) {
+ case PHY_AR803X_ID:
+ netdev_dbg(adapter->netdev,
+ "Disabling hibernation for AR803X PHY\n");
+ ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_OFF,
+ PHY_AR8031_HIBERNATE);
+ if (ret)
+ break;
+
+ pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_DAT, &mii_reg);
+ mii_reg &= ~PHY_AR8031_PS_HIB_EN;
+ ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_DAT,
+ mii_reg);
+ break;
+ default:
+ netdev_err(adapter->netdev,
+ "Unknown PHY (%x), could not disable hibernation\n",
+ hw->phy.id);
+ return -EINVAL;
+ }
+
+ if (ret)
+ netdev_err(adapter->netdev,
+ "Could not disable PHY hibernation\n");
+ return ret;
}
void pch_gbe_phy_power_down(struct pch_gbe_hw *hw);
void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw);
void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw);
+int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw);
#endif /* _PCH_GBE_PHY_H_ */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff