Also update references to thinkpad-acpi.txt in Kconfig.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
CC: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
- info on the magic SysRq key.
telephony/
- directory with info on telephony (e.g. voice over IP) support.
-thinkpad-acpi.txt
- - information on the (IBM and Lenovo) ThinkPad ACPI Extras driver.
time_interpolators.txt
- info on time interpolators.
tipar.txt
00-INDEX
- This file
+thinkpad-acpi.txt
+ - information on the (IBM and Lenovo) ThinkPad ACPI Extras driver.
--- /dev/null
+ ThinkPad ACPI Extras Driver
+
+ Version 0.19
+ January 06th, 2008
+
+ Borislav Deianov <borislav@users.sf.net>
+ Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ http://ibm-acpi.sf.net/
+
+
+This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
+supports various features of these laptops which are accessible
+through the ACPI and ACPI EC framework, but not otherwise fully
+supported by the generic Linux ACPI drivers.
+
+This driver used to be named ibm-acpi until kernel 2.6.21 and release
+0.13-20070314. It used to be in the drivers/acpi tree, but it was
+moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
+2.6.22, and release 0.14.
+
+
+Status
+------
+
+The features currently supported are the following (see below for
+detailed description):
+
+ - Fn key combinations
+ - Bluetooth enable and disable
+ - video output switching, expansion control
+ - ThinkLight on and off
+ - limited docking and undocking
+ - UltraBay eject
+ - CMOS control
+ - LED control
+ - ACPI sounds
+ - temperature sensors
+ - Experimental: embedded controller register dump
+ - LCD brightness control
+ - Volume control
+ - Fan control and monitoring: fan speed, fan enable/disable
+ - Experimental: WAN enable and disable
+
+A compatibility table by model and feature is maintained on the web
+site, http://ibm-acpi.sf.net/. I appreciate any success or failure
+reports, especially if they add to or correct the compatibility table.
+Please include the following information in your report:
+
+ - ThinkPad model name
+ - a copy of your DSDT, from /proc/acpi/dsdt
+ - a copy of the output of dmidecode, with serial numbers
+ and UUIDs masked off
+ - which driver features work and which don't
+ - the observed behavior of non-working features
+
+Any other comments or patches are also more than welcome.
+
+
+Installation
+------------
+
+If you are compiling this driver as included in the Linux kernel
+sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally
+enable the CONFIG_THINKPAD_ACPI_BAY option if you want the
+thinkpad-specific bay functionality.
+
+Features
+--------
+
+The driver exports two different interfaces to userspace, which can be
+used to access the features it provides. One is a legacy procfs-based
+interface, which will be removed at some time in the distant future.
+The other is a new sysfs-based interface which is not complete yet.
+
+The procfs interface creates the /proc/acpi/ibm directory. There is a
+file under that directory for each feature it supports. The procfs
+interface is mostly frozen, and will change very little if at all: it
+will not be extended to add any new functionality in the driver, instead
+all new functionality will be implemented on the sysfs interface.
+
+The sysfs interface tries to blend in the generic Linux sysfs subsystems
+and classes as much as possible. Since some of these subsystems are not
+yet ready or stabilized, it is expected that this interface will change,
+and any and all userspace programs must deal with it.
+
+
+Notes about the sysfs interface:
+
+Unlike what was done with the procfs interface, correctness when talking
+to the sysfs interfaces will be enforced, as will correctness in the
+thinkpad-acpi's implementation of sysfs interfaces.
+
+Also, any bugs in the thinkpad-acpi sysfs driver code or in the
+thinkpad-acpi's implementation of the sysfs interfaces will be fixed for
+maximum correctness, even if that means changing an interface in
+non-compatible ways. As these interfaces mature both in the kernel and
+in thinkpad-acpi, such changes should become quite rare.
+
+Applications interfacing to the thinkpad-acpi sysfs interfaces must
+follow all sysfs guidelines and correctly process all errors (the sysfs
+interface makes extensive use of errors). File descriptors and open /
+close operations to the sysfs inodes must also be properly implemented.
+
+The version of thinkpad-acpi's sysfs interface is exported by the driver
+as a driver attribute (see below).
+
+Sysfs driver attributes are on the driver's sysfs attribute space,
+for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and
+/sys/bus/platform/drivers/thinkpad_hwmon/
+
+Sysfs device attributes are on the thinkpad_acpi device sysfs attribute
+space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/.
+
+Sysfs device attributes for the sensors and fan are on the
+thinkpad_hwmon device's sysfs attribute space, but you should locate it
+looking for a hwmon device with the name attribute of "thinkpad".
+
+Driver version
+--------------
+
+procfs: /proc/acpi/ibm/driver
+sysfs driver attribute: version
+
+The driver name and version. No commands can be written to this file.
+
+Sysfs interface version
+-----------------------
+
+sysfs driver attribute: interface_version
+
+Version of the thinkpad-acpi sysfs interface, as an unsigned long
+(output in hex format: 0xAAAABBCC), where:
+ AAAA - major revision
+ BB - minor revision
+ CC - bugfix revision
+
+The sysfs interface version changelog for the driver can be found at the
+end of this document. Changes to the sysfs interface done by the kernel
+subsystems are not documented here, nor are they tracked by this
+attribute.
+
+Changes to the thinkpad-acpi sysfs interface are only considered
+non-experimental when they are submitted to Linux mainline, at which
+point the changes in this interface are documented and interface_version
+may be updated. If you are using any thinkpad-acpi features not yet
+sent to mainline for merging, you do so on your own risk: these features
+may disappear, or be implemented in a different and incompatible way by
+the time they are merged in Linux mainline.
+
+Changes that are backwards-compatible by nature (e.g. the addition of
+attributes that do not change the way the other attributes work) do not
+always warrant an update of interface_version. Therefore, one must
+expect that an attribute might not be there, and deal with it properly
+(an attribute not being there *is* a valid way to make it clear that a
+feature is not available in sysfs).
+
+Hot keys
+--------
+
+procfs: /proc/acpi/ibm/hotkey
+sysfs device attribute: hotkey_*
+
+In a ThinkPad, the ACPI HKEY handler is responsible for comunicating
+some important events and also keyboard hot key presses to the operating
+system. Enabling the hotkey functionality of thinkpad-acpi signals the
+firmware that such a driver is present, and modifies how the ThinkPad
+firmware will behave in many situations.
+
+The driver enables the hot key feature automatically when loaded. The
+feature can later be disabled and enabled back at runtime. The driver
+will also restore the hot key feature to its previous state and mask
+when it is unloaded.
+
+When the hotkey feature is enabled and the hot key mask is set (see
+below), the driver will report HKEY events in the following format:
+
+ ibm/hotkey HKEY 00000080 0000xxxx
+
+Some of these events refer to hot key presses, but not all.
+
+The driver will generate events over the input layer for hot keys and
+radio switches, and over the ACPI netlink layer for other events. The
+input layer support accepts the standard IOCTLs to remap the keycodes
+assigned to each hot key.
+
+The hot key bit mask allows some control over which hot keys generate
+events. If a key is "masked" (bit set to 0 in the mask), the firmware
+will handle it. If it is "unmasked", it signals the firmware that
+thinkpad-acpi would prefer to handle it, if the firmware would be so
+kind to allow it (and it often doesn't!).
+
+Not all bits in the mask can be modified. Not all bits that can be
+modified do anything. Not all hot keys can be individually controlled
+by the mask. Some models do not support the mask at all, and in those
+models, hot keys cannot be controlled individually. The behaviour of
+the mask is, therefore, higly dependent on the ThinkPad model.
+
+Note that unmasking some keys prevents their default behavior. For
+example, if Fn+F5 is unmasked, that key will no longer enable/disable
+Bluetooth by itself.
+
+Note also that not all Fn key combinations are supported through ACPI.
+For example, on the X40, the brightness, volume and "Access IBM" buttons
+do not generate ACPI events even with this driver. They *can* be used
+through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+
+procfs notes:
+
+The following commands can be written to the /proc/acpi/ibm/hotkey file:
+
+ echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
+ echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
+ echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
+ echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
+ ... any other 8-hex-digit mask ...
+ echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
+
+The procfs interface does not support NVRAM polling control. So as to
+maintain maximum bug-to-bug compatibility, it does not report any masks,
+nor does it allow one to manipulate the hot key mask when the firmware
+does not support masks at all, even if NVRAM polling is in use.
+
+sysfs notes:
+
+ hotkey_bios_enabled:
+ Returns the status of the hot keys feature when
+ thinkpad-acpi was loaded. Upon module unload, the hot
+ key feature status will be restored to this value.
+
+ 0: hot keys were disabled
+ 1: hot keys were enabled (unusual)
+
+ hotkey_bios_mask:
+ Returns the hot keys mask when thinkpad-acpi was loaded.
+ Upon module unload, the hot keys mask will be restored
+ to this value.
+
+ hotkey_enable:
+ Enables/disables the hot keys feature in the ACPI
+ firmware, and reports current status of the hot keys
+ feature. Has no effect on the NVRAM hot key polling
+ functionality.
+
+ 0: disables the hot keys feature / feature disabled
+ 1: enables the hot keys feature / feature enabled
+
+ hotkey_mask:
+ bit mask to enable driver-handling (and depending on
+ the firmware, ACPI event generation) for each hot key
+ (see above). Returns the current status of the hot keys
+ mask, and allows one to modify it.
+
+ Note: when NVRAM polling is active, the firmware mask
+ will be different from the value returned by
+ hotkey_mask. The driver will retain enabled bits for
+ hotkeys that are under NVRAM polling even if the
+ firmware refuses them, and will not set these bits on
+ the firmware hot key mask.
+
+ hotkey_all_mask:
+ bit mask that should enable event reporting for all
+ supported hot keys, when echoed to hotkey_mask above.
+ Unless you know which events need to be handled
+ passively (because the firmware *will* handle them
+ anyway), do *not* use hotkey_all_mask. Use
+ hotkey_recommended_mask, instead. You have been warned.
+
+ hotkey_recommended_mask:
+ bit mask that should enable event reporting for all
+ supported hot keys, except those which are always
+ handled by the firmware anyway. Echo it to
+ hotkey_mask above, to use.
+
+ hotkey_source_mask:
+ bit mask that selects which hot keys will the driver
+ poll the NVRAM for. This is auto-detected by the driver
+ based on the capabilities reported by the ACPI firmware,
+ but it can be overridden at runtime.
+
+ Hot keys whose bits are set in both hotkey_source_mask
+ and also on hotkey_mask are polled for in NVRAM. Only a
+ few hot keys are available through CMOS NVRAM polling.
+
+ Warning: when in NVRAM mode, the volume up/down/mute
+ keys are synthesized according to changes in the mixer,
+ so you have to use volume up or volume down to unmute,
+ as per the ThinkPad volume mixer user interface. When
+ in ACPI event mode, volume up/down/mute are reported as
+ separate events, but this behaviour may be corrected in
+ future releases of this driver, in which case the
+ ThinkPad volume mixer user interface semanthics will be
+ enforced.
+
+ hotkey_poll_freq:
+ frequency in Hz for hot key polling. It must be between
+ 0 and 25 Hz. Polling is only carried out when strictly
+ needed.
+
+ Setting hotkey_poll_freq to zero disables polling, and
+ will cause hot key presses that require NVRAM polling
+ to never be reported.
+
+ Setting hotkey_poll_freq too low will cause repeated
+ pressings of the same hot key to be misreported as a
+ single key press, or to not even be detected at all.
+ The recommended polling frequency is 10Hz.
+
+ hotkey_radio_sw:
+ if the ThinkPad has a hardware radio switch, this
+ attribute will read 0 if the switch is in the "radios
+ disabled" postition, and 1 if the switch is in the
+ "radios enabled" position.
+
+ This attribute has poll()/select() support.
+
+ hotkey_report_mode:
+ Returns the state of the procfs ACPI event report mode
+ filter for hot keys. If it is set to 1 (the default),
+ all hot key presses are reported both through the input
+ layer and also as ACPI events through procfs (but not
+ through netlink). If it is set to 2, hot key presses
+ are reported only through the input layer.
+
+ This attribute is read-only in kernels 2.6.23 or later,
+ and read-write on earlier kernels.
+
+ May return -EPERM (write access locked out by module
+ parameter) or -EACCES (read-only).
+
+ wakeup_reason:
+ Set to 1 if the system is waking up because the user
+ requested a bay ejection. Set to 2 if the system is
+ waking up because the user requested the system to
+ undock. Set to zero for normal wake-ups or wake-ups
+ due to unknown reasons.
+
+ This attribute has poll()/select() support.
+
+ wakeup_hotunplug_complete:
+ Set to 1 if the system was waken up because of an
+ undock or bay ejection request, and that request
+ was sucessfully completed. At this point, it might
+ be useful to send the system back to sleep, at the
+ user's choice. Refer to HKEY events 0x4003 and
+ 0x3003, below.
+
+ This attribute has poll()/select() support.
+
+input layer notes:
+
+A Hot key is mapped to a single input layer EV_KEY event, possibly
+followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
+code. An EV_SYN event will always be generated to mark the end of the
+event block.
+
+Do not use the EV_MSC MSC_SCAN events to process keys. They are to be
+used as a helper to remap keys, only. They are particularly useful when
+remapping KEY_UNKNOWN keys.
+
+The events are available in an input device, with the following id:
+
+ Bus: BUS_HOST
+ vendor: 0x1014 (PCI_VENDOR_ID_IBM) or
+ 0x17aa (PCI_VENDOR_ID_LENOVO)
+ product: 0x5054 ("TP")
+ version: 0x4101
+
+The version will have its LSB incremented if the keymap changes in a
+backwards-compatible way. The MSB shall always be 0x41 for this input
+device. If the MSB is not 0x41, do not use the device as described in
+this section, as it is either something else (e.g. another input device
+exported by a thinkpad driver, such as HDAPS) or its functionality has
+been changed in a non-backwards compatible way.
+
+Adding other event types for other functionalities shall be considered a
+backwards-compatible change for this input device.
+
+Thinkpad-acpi Hot Key event map (version 0x4101):
+
+ACPI Scan
+event code Key Notes
+
+0x1001 0x00 FN+F1 -
+0x1002 0x01 FN+F2 IBM: battery (rare)
+ Lenovo: Screen lock
+
+0x1003 0x02 FN+F3 Many IBM models always report
+ this hot key, even with hot keys
+ disabled or with Fn+F3 masked
+ off
+ IBM: screen lock
+ Lenovo: battery
+
+0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
+ semanthics, i.e. sleep-to-RAM).
+ It is always generate some kind
+ of event, either the hot key
+ event or a ACPI sleep button
+ event. The firmware may
+ refuse to generate further FN+F4
+ key presses until a S3 or S4 ACPI
+ sleep cycle is performed or some
+ time passes.
+
+0x1005 0x04 FN+F5 Radio. Enables/disables
+ the internal BlueTooth hardware
+ and W-WAN card if left in control
+ of the firmware. Does not affect
+ the WLAN card.
+ Should be used to turn on/off all
+ radios (bluetooth+W-WAN+WLAN),
+ really.
+
+0x1006 0x05 FN+F6 -
+
+0x1007 0x06 FN+F7 Video output cycle.
+ Do you feel lucky today?
+
+0x1008 0x07 FN+F8 IBM: toggle screen expand
+ Lenovo: configure ultranav
+
+0x1009 0x08 FN+F9 -
+ .. .. ..
+0x100B 0x0A FN+F11 -
+
+0x100C 0x0B FN+F12 Sleep to disk. You are always
+ supposed to handle it yourself,
+ either through the ACPI event,
+ or through a hotkey event.
+ The firmware may refuse to
+ generate further FN+F4 key
+ press events until a S3 or S4
+ ACPI sleep cycle is performed,
+ or some time passes.
+
+0x100D 0x0C FN+BACKSPACE -
+0x100E 0x0D FN+INSERT -
+0x100F 0x0E FN+DELETE -
+
+0x1010 0x0F FN+HOME Brightness up. This key is
+ always handled by the firmware
+ in IBM ThinkPads, even when
+ unmasked. Just leave it alone.
+ For Lenovo ThinkPads with a new
+ BIOS, it has to be handled either
+ by the ACPI OSI, or by userspace.
+0x1011 0x10 FN+END Brightness down. See brightness
+ up for details.
+
+0x1012 0x11 FN+PGUP Thinklight toggle. This key is
+ always handled by the firmware,
+ even when unmasked.
+
+0x1013 0x12 FN+PGDOWN -
+
+0x1014 0x13 FN+SPACE Zoom key
+
+0x1015 0x14 VOLUME UP Internal mixer volume up. This
+ key is always handled by the
+ firmware, even when unmasked.
+ NOTE: Lenovo seems to be changing
+ this.
+0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
+ key is always handled by the
+ firmware, even when unmasked.
+ NOTE: Lenovo seems to be changing
+ this.
+0x1017 0x16 MUTE Mute internal mixer. This
+ key is always handled by the
+ firmware, even when unmasked.
+
+0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key
+
+0x1019 0x18 unknown
+.. .. ..
+0x1020 0x1F unknown
+
+The ThinkPad firmware does not allow one to differentiate when most hot
+keys are pressed or released (either that, or we don't know how to, yet).
+For these keys, the driver generates a set of events for a key press and
+immediately issues the same set of events for a key release. It is
+unknown by the driver if the ThinkPad firmware triggered these events on
+hot key press or release, but the firmware will do it for either one, not
+both.
+
+If a key is mapped to KEY_RESERVED, it generates no input events at all.
+If a key is mapped to KEY_UNKNOWN, it generates an input event that
+includes an scan code. If a key is mapped to anything else, it will
+generate input device EV_KEY events.
+
+Non hot-key ACPI HKEY event map:
+0x5001 Lid closed
+0x5002 Lid opened
+0x7000 Radio Switch may have changed state
+
+The above events are not propagated by the driver, except for legacy
+compatibility purposes when hotkey_report_mode is set to 1.
+
+0x2304 System is waking up from suspend to undock
+0x2305 System is waking up from suspend to eject bay
+0x2404 System is waking up from hibernation to undock
+0x2405 System is waking up from hibernation to eject bay
+
+The above events are never propagated by the driver.
+
+0x3003 Bay ejection (see 0x2x05) complete, can sleep again
+0x4003 Undocked (see 0x2x04), can sleep again
+0x5009 Tablet swivel: switched to tablet mode
+0x500A Tablet swivel: switched to normal mode
+0x500B Tablet pen insterted into its storage bay
+0x500C Tablet pen removed from its storage bay
+0x5010 Brightness level changed (newer Lenovo BIOSes)
+
+The above events are propagated by the driver.
+
+Compatibility notes:
+
+ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
+supported the input layer, and sent events over the procfs ACPI event
+interface.
+
+To avoid sending duplicate events over the input layer and the ACPI
+event interface, thinkpad-acpi 0.16 implements a module parameter
+(hotkey_report_mode), and also a sysfs device attribute with the same
+name.
+
+Make no mistake here: userspace is expected to switch to using the input
+layer interface of thinkpad-acpi, together with the ACPI netlink event
+interface in kernels 2.6.23 and later, or with the ACPI procfs event
+interface in kernels 2.6.22 and earlier.
+
+If no hotkey_report_mode module parameter is specified (or it is set to
+zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22
+and earlier, also allows one to change the hotkey_report_mode through
+sysfs. In kernels 2.6.23 and later, where the netlink ACPI event
+interface is available, hotkey_report_mode cannot be changed through
+sysfs (it is read-only).
+
+If the hotkey_report_mode module parameter is set to 1 or 2, it cannot
+be changed later through sysfs (any writes will return -EPERM to signal
+that hotkey_report_mode was locked. On 2.6.23 and later, where
+hotkey_report_mode cannot be changed at all, writes will return -EACES).
+
+hotkey_report_mode set to 1 makes the driver export through the procfs
+ACPI event interface all hot key presses (which are *also* sent to the
+input layer). This is a legacy compatibility behaviour, and it is also
+the default mode of operation for the driver.
+
+hotkey_report_mode set to 2 makes the driver filter out the hot key
+presses from the procfs ACPI event interface, so these events will only
+be sent through the input layer. Userspace that has been updated to use
+the thinkpad-acpi input layer interface should set hotkey_report_mode to
+2.
+
+Hot key press events are never sent to the ACPI netlink event interface.
+Really up-to-date userspace under kernel 2.6.23 and later is to use the
+netlink interface and the input layer interface, and don't bother at all
+with hotkey_report_mode.
+
+
+Bluetooth
+---------
+
+procfs: /proc/acpi/ibm/bluetooth
+sysfs device attribute: bluetooth_enable
+
+This feature shows the presence and current state of a ThinkPad
+Bluetooth device in the internal ThinkPad CDC slot.
+
+Procfs notes:
+
+If Bluetooth is installed, the following commands can be used:
+
+ echo enable > /proc/acpi/ibm/bluetooth
+ echo disable > /proc/acpi/ibm/bluetooth
+
+Sysfs notes:
+
+ If the Bluetooth CDC card is installed, it can be enabled /
+ disabled through the "bluetooth_enable" thinkpad-acpi device
+ attribute, and its current status can also be queried.
+
+ enable:
+ 0: disables Bluetooth / Bluetooth is disabled
+ 1: enables Bluetooth / Bluetooth is enabled.
+
+ Note: this interface will be probably be superseeded by the
+ generic rfkill class, so it is NOT to be considered stable yet.
+
+Video output control -- /proc/acpi/ibm/video
+--------------------------------------------
+
+This feature allows control over the devices used for video output -
+LCD, CRT or DVI (if available). The following commands are available:
+
+ echo lcd_enable > /proc/acpi/ibm/video
+ echo lcd_disable > /proc/acpi/ibm/video
+ echo crt_enable > /proc/acpi/ibm/video
+ echo crt_disable > /proc/acpi/ibm/video
+ echo dvi_enable > /proc/acpi/ibm/video
+ echo dvi_disable > /proc/acpi/ibm/video
+ echo auto_enable > /proc/acpi/ibm/video
+ echo auto_disable > /proc/acpi/ibm/video
+ echo expand_toggle > /proc/acpi/ibm/video
+ echo video_switch > /proc/acpi/ibm/video
+
+Each video output device can be enabled or disabled individually.
+Reading /proc/acpi/ibm/video shows the status of each device.
+
+Automatic video switching can be enabled or disabled. When automatic
+video switching is enabled, certain events (e.g. opening the lid,
+docking or undocking) cause the video output device to change
+automatically. While this can be useful, it also causes flickering
+and, on the X40, video corruption. By disabling automatic switching,
+the flickering or video corruption can be avoided.
+
+The video_switch command cycles through the available video outputs
+(it simulates the behavior of Fn-F7).
+
+Video expansion can be toggled through this feature. This controls
+whether the display is expanded to fill the entire LCD screen when a
+mode with less than full resolution is used. Note that the current
+video expansion status cannot be determined through this feature.
+
+Note that on many models (particularly those using Radeon graphics
+chips) the X driver configures the video card in a way which prevents
+Fn-F7 from working. This also disables the video output switching
+features of this driver, as it uses the same ACPI methods as
+Fn-F7. Video switching on the console should still work.
+
+UPDATE: There's now a patch for the X.org Radeon driver which
+addresses this issue. Some people are reporting success with the patch
+while others are still having problems. For more information:
+
+https://bugs.freedesktop.org/show_bug.cgi?id=2000
+
+ThinkLight control -- /proc/acpi/ibm/light
+------------------------------------------
+
+The current status of the ThinkLight can be found in this file. A few
+models which do not make the status available will show it as
+"unknown". The available commands are:
+
+ echo on > /proc/acpi/ibm/light
+ echo off > /proc/acpi/ibm/light
+
+Docking / undocking -- /proc/acpi/ibm/dock
+------------------------------------------
+
+Docking and undocking (e.g. with the X4 UltraBase) requires some
+actions to be taken by the operating system to safely make or break
+the electrical connections with the dock.
+
+The docking feature of this driver generates the following ACPI events:
+
+ ibm/dock GDCK 00000003 00000001 -- eject request
+ ibm/dock GDCK 00000003 00000002 -- undocked
+ ibm/dock GDCK 00000000 00000003 -- docked
+
+NOTE: These events will only be generated if the laptop was docked
+when originally booted. This is due to the current lack of support for
+hot plugging of devices in the Linux ACPI framework. If the laptop was
+booted while not in the dock, the following message is shown in the
+logs:
+
+ Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
+
+In this case, no dock-related events are generated but the dock and
+undock commands described below still work. They can be executed
+manually or triggered by Fn key combinations (see the example acpid
+configuration files included in the driver tarball package available
+on the web site).
+
+When the eject request button on the dock is pressed, the first event
+above is generated. The handler for this event should issue the
+following command:
+
+ echo undock > /proc/acpi/ibm/dock
+
+After the LED on the dock goes off, it is safe to eject the laptop.
+Note: if you pressed this key by mistake, go ahead and eject the
+laptop, then dock it back in. Otherwise, the dock may not function as
+expected.
+
+When the laptop is docked, the third event above is generated. The
+handler for this event should issue the following command to fully
+enable the dock:
+
+ echo dock > /proc/acpi/ibm/dock
+
+The contents of the /proc/acpi/ibm/dock file shows the current status
+of the dock, as provided by the ACPI framework.
+
+The docking support in this driver does not take care of enabling or
+disabling any other devices you may have attached to the dock. For
+example, a CD drive plugged into the UltraBase needs to be disabled or
+enabled separately. See the provided example acpid configuration files
+for how this can be accomplished.
+
+There is no support yet for PCI devices that may be attached to a
+docking station, e.g. in the ThinkPad Dock II. The driver currently
+does not recognize, enable or disable such devices. This means that
+the only docking stations currently supported are the X-series
+UltraBase docks and "dumb" port replicators like the Mini Dock (the
+latter don't need any ACPI support, actually).
+
+UltraBay eject -- /proc/acpi/ibm/bay
+------------------------------------
+
+Inserting or ejecting an UltraBay device requires some actions to be
+taken by the operating system to safely make or break the electrical
+connections with the device.
+
+This feature generates the following ACPI events:
+
+ ibm/bay MSTR 00000003 00000000 -- eject request
+ ibm/bay MSTR 00000001 00000000 -- eject lever inserted
+
+NOTE: These events will only be generated if the UltraBay was present
+when the laptop was originally booted (on the X series, the UltraBay
+is in the dock, so it may not be present if the laptop was undocked).
+This is due to the current lack of support for hot plugging of devices
+in the Linux ACPI framework. If the laptop was booted without the
+UltraBay, the following message is shown in the logs:
+
+ Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
+
+In this case, no bay-related events are generated but the eject
+command described below still works. It can be executed manually or
+triggered by a hot key combination.
+
+Sliding the eject lever generates the first event shown above. The
+handler for this event should take whatever actions are necessary to
+shut down the device in the UltraBay (e.g. call idectl), then issue
+the following command:
+
+ echo eject > /proc/acpi/ibm/bay
+
+After the LED on the UltraBay goes off, it is safe to pull out the
+device.
+
+When the eject lever is inserted, the second event above is
+generated. The handler for this event should take whatever actions are
+necessary to enable the UltraBay device (e.g. call idectl).
+
+The contents of the /proc/acpi/ibm/bay file shows the current status
+of the UltraBay, as provided by the ACPI framework.
+
+EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
+this feature, you need to supply the experimental=1 parameter when
+loading the module):
+
+These models do not have a button near the UltraBay device to request
+a hot eject but rather require the laptop to be put to sleep
+(suspend-to-ram) before the bay device is ejected or inserted).
+The sequence of steps to eject the device is as follows:
+
+ echo eject > /proc/acpi/ibm/bay
+ put the ThinkPad to sleep
+ remove the drive
+ resume from sleep
+ cat /proc/acpi/ibm/bay should show that the drive was removed
+
+On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
+supported. Use "eject2" instead of "eject" for the second bay.
+
+Note: the UltraBay eject support on the 600e/x, A22p and A3x is
+EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
+
+CMOS control
+------------
+
+procfs: /proc/acpi/ibm/cmos
+sysfs device attribute: cmos_command
+
+This feature is mostly used internally by the ACPI firmware to keep the legacy
+CMOS NVRAM bits in sync with the current machine state, and to record this
+state so that the ThinkPad will retain such settings across reboots.
+
+Some of these commands actually perform actions in some ThinkPad models, but
+this is expected to disappear more and more in newer models. As an example, in
+a T43 and in a X40, commands 12 and 13 still control the ThinkLight state for
+real, but commands 0 to 2 don't control the mixer anymore (they have been
+phased out) and just update the NVRAM.
+
+The range of valid cmos command numbers is 0 to 21, but not all have an
+effect and the behavior varies from model to model. Here is the behavior
+on the X40 (tpb is the ThinkPad Buttons utility):
+
+ 0 - Related to "Volume down" key press
+ 1 - Related to "Volume up" key press
+ 2 - Related to "Mute on" key press
+ 3 - Related to "Access IBM" key press
+ 4 - Related to "LCD brightness up" key pess
+ 5 - Related to "LCD brightness down" key press
+ 11 - Related to "toggle screen expansion" key press/function
+ 12 - Related to "ThinkLight on"
+ 13 - Related to "ThinkLight off"
+ 14 - Related to "ThinkLight" key press (toggle thinklight)
+
+The cmos command interface is prone to firmware split-brain problems, as
+in newer ThinkPads it is just a compatibility layer. Do not use it, it is
+exported just as a debug tool.
+
+LED control -- /proc/acpi/ibm/led
+---------------------------------
+
+Some of the LED indicators can be controlled through this feature. The
+available commands are:
+
+ echo '<led number> on' >/proc/acpi/ibm/led
+ echo '<led number> off' >/proc/acpi/ibm/led
+ echo '<led number> blink' >/proc/acpi/ibm/led
+
+The <led number> range is 0 to 7. The set of LEDs that can be
+controlled varies from model to model. Here is the mapping on the X40:
+
+ 0 - power
+ 1 - battery (orange)
+ 2 - battery (green)
+ 3 - UltraBase
+ 4 - UltraBay
+ 7 - standby
+
+All of the above can be turned on and off and can be made to blink.
+
+ACPI sounds -- /proc/acpi/ibm/beep
+----------------------------------
+
+The BEEP method is used internally by the ACPI firmware to provide
+audible alerts in various situations. This feature allows the same
+sounds to be triggered manually.
+
+The commands are non-negative integer numbers:
+
+ echo <number> >/proc/acpi/ibm/beep
+
+The valid <number> range is 0 to 17. Not all numbers trigger sounds
+and the sounds vary from model to model. Here is the behavior on the
+X40:
+
+ 0 - stop a sound in progress (but use 17 to stop 16)
+ 2 - two beeps, pause, third beep ("low battery")
+ 3 - single beep
+ 4 - high, followed by low-pitched beep ("unable")
+ 5 - single beep
+ 6 - very high, followed by high-pitched beep ("AC/DC")
+ 7 - high-pitched beep
+ 9 - three short beeps
+ 10 - very long beep
+ 12 - low-pitched beep
+ 15 - three high-pitched beeps repeating constantly, stop with 0
+ 16 - one medium-pitched beep repeating constantly, stop with 17
+ 17 - stop 16
+
+Temperature sensors
+-------------------
+
+procfs: /proc/acpi/ibm/thermal
+sysfs device attributes: (hwmon "thinkpad") temp*_input
+
+Most ThinkPads include six or more separate temperature sensors but only
+expose the CPU temperature through the standard ACPI methods. This
+feature shows readings from up to eight different sensors on older
+ThinkPads, and up to sixteen different sensors on newer ThinkPads.
+
+For example, on the X40, a typical output may be:
+temperatures: 42 42 45 41 36 -128 33 -128
+
+On the T43/p, a typical output may be:
+temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
+
+The mapping of thermal sensors to physical locations varies depending on
+system-board model (and thus, on ThinkPad model).
+
+http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
+tries to track down these locations for various models.
+
+Most (newer?) models seem to follow this pattern:
+
+1: CPU
+2: (depends on model)
+3: (depends on model)
+4: GPU
+5: Main battery: main sensor
+6: Bay battery: main sensor
+7: Main battery: secondary sensor
+8: Bay battery: secondary sensor
+9-15: (depends on model)
+
+For the R51 (source: Thomas Gruber):
+2: Mini-PCI
+3: Internal HDD
+
+For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
+http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
+2: System board, left side (near PCMCIA slot), reported as HDAPS temp
+3: PCMCIA slot
+9: MCH (northbridge) to DRAM Bus
+10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
+ card, under touchpad
+11: Power regulator, underside of system board, below F2 key
+
+The A31 has a very atypical layout for the thermal sensors
+(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
+1: CPU
+2: Main Battery: main sensor
+3: Power Converter
+4: Bay Battery: main sensor
+5: MCH (northbridge)
+6: PCMCIA/ambient
+7: Main Battery: secondary sensor
+8: Bay Battery: secondary sensor
+
+
+Procfs notes:
+ Readings from sensors that are not available return -128.
+ No commands can be written to this file.
+
+Sysfs notes:
+ Sensors that are not available return the ENXIO error. This
+ status may change at runtime, as there are hotplug thermal
+ sensors, like those inside the batteries and docks.
+
+ thinkpad-acpi thermal sensors are reported through the hwmon
+ subsystem, and follow all of the hwmon guidelines at
+ Documentation/hwmon.
+
+
+EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
+------------------------------------------------------------------------
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature dumps the values of 256 embedded controller
+registers. Values which have changed since the last time the registers
+were dumped are marked with a star:
+
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
+EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
+EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
+EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
+EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80
+EC 0x30: 01 07 1a 00 30 04 00 00 *85 00 00 10 00 50 00 00
+EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00
+EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 *bc *02 *bc
+EC 0x60: *02 *bc *02 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0x70: 00 00 00 00 00 12 30 40 *24 *26 *2c *27 *20 80 *1f 80
+EC 0x80: 00 00 00 06 *37 *0e 03 00 00 00 0e 07 00 00 00 00
+EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xa0: *ff 09 ff 09 ff ff *64 00 *00 *00 *a2 41 *ff *ff *e0 00
+EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03
+EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a
+
+This feature can be used to determine the register holding the fan
+speed on some models. To do that, do the following:
+
+ - make sure the battery is fully charged
+ - make sure the fan is running
+ - run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
+
+The first step makes sure various charging-related values don't
+vary. The second ensures that the fan-related values do vary, since
+the fan speed fluctuates a bit. The third will (hopefully) mark the
+fan register with a star:
+
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
+EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
+EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
+EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
+EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80
+EC 0x30: 01 07 1a 00 30 04 00 00 85 00 00 10 00 50 00 00
+EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00
+EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 bc 02 bc
+EC 0x60: 02 bc 02 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0x70: 00 00 00 00 00 12 30 40 24 27 2c 27 21 80 1f 80
+EC 0x80: 00 00 00 06 *be 0d 03 00 00 00 0e 07 00 00 00 00
+EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xa0: ff 09 ff 09 ff ff 64 00 00 00 a2 41 ff ff e0 00
+EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03
+EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a
+
+Another set of values that varies often is the temperature
+readings. Since temperatures don't change vary fast, you can take
+several quick dumps to eliminate them.
+
+You can use a similar method to figure out the meaning of other
+embedded controller registers - e.g. make sure nothing else changes
+except the charging or discharging battery to determine which
+registers contain the current battery capacity, etc. If you experiment
+with this, do send me your results (including some complete dumps with
+a description of the conditions when they were taken.)
+
+LCD brightness control
+----------------------
+
+procfs: /proc/acpi/ibm/brightness
+sysfs backlight device "thinkpad_screen"
+
+This feature allows software control of the LCD brightness on ThinkPad
+models which don't have a hardware brightness slider.
+
+It has some limitations: the LCD backlight cannot be actually turned on or
+off by this interface, and in many ThinkPad models, the "dim while on
+battery" functionality will be enabled by the BIOS when this interface is
+used, and cannot be controlled.
+
+On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
+has eight brightness levels, ranging from 0 to 7. Some of the levels
+may not be distinct. Later Lenovo models that implement the ACPI
+display backlight brightness control methods have 16 levels, ranging
+from 0 to 15.
+
+There are two interfaces to the firmware for direct brightness control,
+EC and CMOS. To select which one should be used, use the
+brightness_mode module parameter: brightness_mode=1 selects EC mode,
+brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
+and CMOS. The driver tries to autodetect which interface to use.
+
+When display backlight brightness controls are available through the
+standard ACPI interface, it is best to use it instead of this direct
+ThinkPad-specific interface. The driver will disable its native
+backlight brightness control interface if it detects that the standard
+ACPI interface is available in the ThinkPad.
+
+The brightness_enable module parameter can be used to control whether
+the LCD brightness control feature will be enabled when available.
+brightness_enable=0 forces it to be disabled. brightness_enable=1
+forces it to be enabled when available, even if the standard ACPI
+interface is also available.
+
+Procfs notes:
+
+ The available commands are:
+
+ echo up >/proc/acpi/ibm/brightness
+ echo down >/proc/acpi/ibm/brightness
+ echo 'level <level>' >/proc/acpi/ibm/brightness
+
+Sysfs notes:
+
+The interface is implemented through the backlight sysfs class, which is
+poorly documented at this time.
+
+Locate the thinkpad_screen device under /sys/class/backlight, and inside
+it there will be the following attributes:
+
+ max_brightness:
+ Reads the maximum brightness the hardware can be set to.
+ The minimum is always zero.
+
+ actual_brightness:
+ Reads what brightness the screen is set to at this instant.
+
+ brightness:
+ Writes request the driver to change brightness to the
+ given value. Reads will tell you what brightness the
+ driver is trying to set the display to when "power" is set
+ to zero and the display has not been dimmed by a kernel
+ power management event.
+
+ power:
+ power management mode, where 0 is "display on", and 1 to 3
+ will dim the display backlight to brightness level 0
+ because thinkpad-acpi cannot really turn the backlight
+ off. Kernel power management events can temporarily
+ increase the current power management level, i.e. they can
+ dim the display.
+
+
+Volume control -- /proc/acpi/ibm/volume
+---------------------------------------
+
+This feature allows volume control on ThinkPad models which don't have
+a hardware volume knob. The available commands are:
+
+ echo up >/proc/acpi/ibm/volume
+ echo down >/proc/acpi/ibm/volume
+ echo mute >/proc/acpi/ibm/volume
+ echo 'level <level>' >/proc/acpi/ibm/volume
+
+The <level> number range is 0 to 15 although not all of them may be
+distinct. The unmute the volume after the mute command, use either the
+up or down command (the level command will not unmute the volume).
+The current volume level and mute state is shown in the file.
+
+Fan control and monitoring: fan speed, fan enable/disable
+---------------------------------------------------------
+
+procfs: /proc/acpi/ibm/fan
+sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
+ pwm1_enable
+sysfs hwmon driver attributes: fan_watchdog
+
+NOTE NOTE NOTE: fan control operations are disabled by default for
+safety reasons. To enable them, the module parameter "fan_control=1"
+must be given to thinkpad-acpi.
+
+This feature attempts to show the current fan speed, control mode and
+other fan data that might be available. The speed is read directly
+from the hardware registers of the embedded controller. This is known
+to work on later R, T, X and Z series ThinkPads but may show a bogus
+value on other models.
+
+Fan levels:
+
+Most ThinkPad fans work in "levels" at the firmware interface. Level 0
+stops the fan. The higher the level, the higher the fan speed, although
+adjacent levels often map to the same fan speed. 7 is the highest
+level, where the fan reaches the maximum recommended speed.
+
+Level "auto" means the EC changes the fan level according to some
+internal algorithm, usually based on readings from the thermal sensors.
+
+There is also a "full-speed" level, also known as "disengaged" level.
+In this level, the EC disables the speed-locked closed-loop fan control,
+and drives the fan as fast as it can go, which might exceed hardware
+limits, so use this level with caution.
+
+The fan usually ramps up or down slowly from one speed to another, and
+it is normal for the EC to take several seconds to react to fan
+commands. The full-speed level may take up to two minutes to ramp up to
+maximum speed, and in some ThinkPads, the tachometer readings go stale
+while the EC is transitioning to the full-speed level.
+
+WARNING WARNING WARNING: do not leave the fan disabled unless you are
+monitoring all of the temperature sensor readings and you are ready to
+enable it if necessary to avoid overheating.
+
+An enabled fan in level "auto" may stop spinning if the EC decides the
+ThinkPad is cool enough and doesn't need the extra airflow. This is
+normal, and the EC will spin the fan up if the various thermal readings
+rise too much.
+
+On the X40, this seems to depend on the CPU and HDD temperatures.
+Specifically, the fan is turned on when either the CPU temperature
+climbs to 56 degrees or the HDD temperature climbs to 46 degrees. The
+fan is turned off when the CPU temperature drops to 49 degrees and the
+HDD temperature drops to 41 degrees. These thresholds cannot
+currently be controlled.
+
+The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
+certain conditions are met. It will override any fan programming done
+through thinkpad-acpi.
+
+The thinkpad-acpi kernel driver can be programmed to revert the fan
+level to a safe setting if userspace does not issue one of the procfs
+fan commands: "enable", "disable", "level" or "watchdog", or if there
+are no writes to pwm1_enable (or to pwm1 *if and only if* pwm1_enable is
+set to 1, manual mode) within a configurable amount of time of up to
+120 seconds. This functionality is called fan safety watchdog.
+
+Note that the watchdog timer stops after it enables the fan. It will be
+rearmed again automatically (using the same interval) when one of the
+above mentioned fan commands is received. The fan watchdog is,
+therefore, not suitable to protect against fan mode changes made through
+means other than the "enable", "disable", and "level" procfs fan
+commands, or the hwmon fan control sysfs interface.
+
+Procfs notes:
+
+The fan may be enabled or disabled with the following commands:
+
+ echo enable >/proc/acpi/ibm/fan
+ echo disable >/proc/acpi/ibm/fan
+
+Placing a fan on level 0 is the same as disabling it. Enabling a fan
+will try to place it in a safe level if it is too slow or disabled.
+
+The fan level can be controlled with the command:
+
+ echo 'level <level>' > /proc/acpi/ibm/fan
+
+Where <level> is an integer from 0 to 7, or one of the words "auto" or
+"full-speed" (without the quotes). Not all ThinkPads support the "auto"
+and "full-speed" levels. The driver accepts "disengaged" as an alias for
+"full-speed", and reports it as "disengaged" for backwards
+compatibility.
+
+On the X31 and X40 (and ONLY on those models), the fan speed can be
+controlled to a certain degree. Once the fan is running, it can be
+forced to run faster or slower with the following command:
+
+ echo 'speed <speed>' > /proc/acpi/ibm/fan
+
+The sustainable range of fan speeds on the X40 appears to be from about
+3700 to about 7350. Values outside this range either do not have any
+effect or the fan speed eventually settles somewhere in that range. The
+fan cannot be stopped or started with this command. This functionality
+is incomplete, and not available through the sysfs interface.
+
+To program the safety watchdog, use the "watchdog" command.
+
+ echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
+
+If you want to disable the watchdog, use 0 as the interval.
+
+Sysfs notes:
+
+The sysfs interface follows the hwmon subsystem guidelines for the most
+part, and the exception is the fan safety watchdog.
+
+Writes to any of the sysfs attributes may return the EINVAL error if
+that operation is not supported in a given ThinkPad or if the parameter
+is out-of-bounds, and EPERM if it is forbidden. They may also return
+EINTR (interrupted system call), and EIO (I/O error while trying to talk
+to the firmware).
+
+Features not yet implemented by the driver return ENOSYS.
+
+hwmon device attribute pwm1_enable:
+ 0: PWM offline (fan is set to full-speed mode)
+ 1: Manual PWM control (use pwm1 to set fan level)
+ 2: Hardware PWM control (EC "auto" mode)
+ 3: reserved (Software PWM control, not implemented yet)
+
+ Modes 0 and 2 are not supported by all ThinkPads, and the
+ driver is not always able to detect this. If it does know a
+ mode is unsupported, it will return -EINVAL.
+
+hwmon device attribute pwm1:
+ Fan level, scaled from the firmware values of 0-7 to the hwmon
+ scale of 0-255. 0 means fan stopped, 255 means highest normal
+ speed (level 7).
+
+ This attribute only commands the fan if pmw1_enable is set to 1
+ (manual PWM control).
+
+hwmon device attribute fan1_input:
+ Fan tachometer reading, in RPM. May go stale on certain
+ ThinkPads while the EC transitions the PWM to offline mode,
+ which can take up to two minutes. May return rubbish on older
+ ThinkPads.
+
+hwmon driver attribute fan_watchdog:
+ Fan safety watchdog timer interval, in seconds. Minimum is
+ 1 second, maximum is 120 seconds. 0 disables the watchdog.
+
+To stop the fan: set pwm1 to zero, and pwm1_enable to 1.
+
+To start the fan in a safe mode: set pwm1_enable to 2. If that fails
+with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
+would be the safest choice, though).
+
+
+EXPERIMENTAL: WAN
+-----------------
+
+procfs: /proc/acpi/ibm/wan
+sysfs device attribute: wwan_enable
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature shows the presence and current state of a W-WAN (Sierra
+Wireless EV-DO) device.
+
+It was tested on a Lenovo Thinkpad X60. It should probably work on other
+Thinkpad models which come with this module installed.
+
+Procfs notes:
+
+If the W-WAN card is installed, the following commands can be used:
+
+ echo enable > /proc/acpi/ibm/wan
+ echo disable > /proc/acpi/ibm/wan
+
+Sysfs notes:
+
+ If the W-WAN card is installed, it can be enabled /
+ disabled through the "wwan_enable" thinkpad-acpi device
+ attribute, and its current status can also be queried.
+
+ enable:
+ 0: disables WWAN card / WWAN card is disabled
+ 1: enables WWAN card / WWAN card is enabled.
+
+ Note: this interface will be probably be superseeded by the
+ generic rfkill class, so it is NOT to be considered stable yet.
+
+Multiple Commands, Module Parameters
+------------------------------------
+
+Multiple commands can be written to the proc files in one shot by
+separating them with commas, for example:
+
+ echo enable,0xffff > /proc/acpi/ibm/hotkey
+ echo lcd_disable,crt_enable > /proc/acpi/ibm/video
+
+Commands can also be specified when loading the thinkpad-acpi module,
+for example:
+
+ modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
+
+Enabling debugging output
+-------------------------
+
+The module takes a debug parameter which can be used to selectively
+enable various classes of debugging output, for example:
+
+ modprobe ibm_acpi debug=0xffff
+
+will enable all debugging output classes. It takes a bitmask, so
+to enable more than one output class, just add their values.
+
+ Debug bitmask Description
+ 0x0001 Initialization and probing
+ 0x0002 Removal
+
+There is also a kernel build option to enable more debugging
+information, which may be necessary to debug driver problems.
+
+The level of debugging information output by the driver can be changed
+at runtime through sysfs, using the driver attribute debug_level. The
+attribute takes the same bitmask as the debug module parameter above.
+
+Force loading of module
+-----------------------
+
+If thinkpad-acpi refuses to detect your ThinkPad, you can try to specify
+the module parameter force_load=1. Regardless of whether this works or
+not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
+
+
+Sysfs interface changelog:
+
+0x000100: Initial sysfs support, as a single platform driver and
+ device.
+0x000200: Hot key support for 32 hot keys, and radio slider switch
+ support.
+0x010000: Hot keys are now handled by default over the input
+ layer, the radio switch generates input event EV_RADIO,
+ and the driver enables hot key handling by default in
+ the firmware.
+
+0x020000: ABI fix: added a separate hwmon platform device and
+ driver, which must be located by name (thinkpad)
+ and the hwmon class for libsensors4 (lm-sensors 3)
+ compatibility. Moved all hwmon attributes to this
+ new platform device.
+
+0x020100: Marker for thinkpad-acpi with hot key NVRAM polling
+ support. If you must, use it to know you should not
+ start an userspace NVRAM poller (allows to detect when
+ NVRAM is compiled out by the user because it is
+ unneeded/undesired in the first place).
+0x020101: Marker for thinkpad-acpi with hot key NVRAM polling
+ and proper hotkey_mask semanthics (version 8 of the
+ NVRAM polling patch). Some development snapshots of
+ 0.18 had an earlier version that did strange things
+ to hotkey_mask.
+
+0x020200: Add poll()/select() support to the following attributes:
+ hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason
+++ /dev/null
- ThinkPad ACPI Extras Driver
-
- Version 0.19
- January 06th, 2008
-
- Borislav Deianov <borislav@users.sf.net>
- Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- http://ibm-acpi.sf.net/
-
-
-This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
-supports various features of these laptops which are accessible
-through the ACPI and ACPI EC framework, but not otherwise fully
-supported by the generic Linux ACPI drivers.
-
-This driver used to be named ibm-acpi until kernel 2.6.21 and release
-0.13-20070314. It used to be in the drivers/acpi tree, but it was
-moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
-2.6.22, and release 0.14.
-
-
-Status
-------
-
-The features currently supported are the following (see below for
-detailed description):
-
- - Fn key combinations
- - Bluetooth enable and disable
- - video output switching, expansion control
- - ThinkLight on and off
- - limited docking and undocking
- - UltraBay eject
- - CMOS control
- - LED control
- - ACPI sounds
- - temperature sensors
- - Experimental: embedded controller register dump
- - LCD brightness control
- - Volume control
- - Fan control and monitoring: fan speed, fan enable/disable
- - Experimental: WAN enable and disable
-
-A compatibility table by model and feature is maintained on the web
-site, http://ibm-acpi.sf.net/. I appreciate any success or failure
-reports, especially if they add to or correct the compatibility table.
-Please include the following information in your report:
-
- - ThinkPad model name
- - a copy of your DSDT, from /proc/acpi/dsdt
- - a copy of the output of dmidecode, with serial numbers
- and UUIDs masked off
- - which driver features work and which don't
- - the observed behavior of non-working features
-
-Any other comments or patches are also more than welcome.
-
-
-Installation
-------------
-
-If you are compiling this driver as included in the Linux kernel
-sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally
-enable the CONFIG_THINKPAD_ACPI_BAY option if you want the
-thinkpad-specific bay functionality.
-
-Features
---------
-
-The driver exports two different interfaces to userspace, which can be
-used to access the features it provides. One is a legacy procfs-based
-interface, which will be removed at some time in the distant future.
-The other is a new sysfs-based interface which is not complete yet.
-
-The procfs interface creates the /proc/acpi/ibm directory. There is a
-file under that directory for each feature it supports. The procfs
-interface is mostly frozen, and will change very little if at all: it
-will not be extended to add any new functionality in the driver, instead
-all new functionality will be implemented on the sysfs interface.
-
-The sysfs interface tries to blend in the generic Linux sysfs subsystems
-and classes as much as possible. Since some of these subsystems are not
-yet ready or stabilized, it is expected that this interface will change,
-and any and all userspace programs must deal with it.
-
-
-Notes about the sysfs interface:
-
-Unlike what was done with the procfs interface, correctness when talking
-to the sysfs interfaces will be enforced, as will correctness in the
-thinkpad-acpi's implementation of sysfs interfaces.
-
-Also, any bugs in the thinkpad-acpi sysfs driver code or in the
-thinkpad-acpi's implementation of the sysfs interfaces will be fixed for
-maximum correctness, even if that means changing an interface in
-non-compatible ways. As these interfaces mature both in the kernel and
-in thinkpad-acpi, such changes should become quite rare.
-
-Applications interfacing to the thinkpad-acpi sysfs interfaces must
-follow all sysfs guidelines and correctly process all errors (the sysfs
-interface makes extensive use of errors). File descriptors and open /
-close operations to the sysfs inodes must also be properly implemented.
-
-The version of thinkpad-acpi's sysfs interface is exported by the driver
-as a driver attribute (see below).
-
-Sysfs driver attributes are on the driver's sysfs attribute space,
-for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and
-/sys/bus/platform/drivers/thinkpad_hwmon/
-
-Sysfs device attributes are on the thinkpad_acpi device sysfs attribute
-space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/.
-
-Sysfs device attributes for the sensors and fan are on the
-thinkpad_hwmon device's sysfs attribute space, but you should locate it
-looking for a hwmon device with the name attribute of "thinkpad".
-
-Driver version
---------------
-
-procfs: /proc/acpi/ibm/driver
-sysfs driver attribute: version
-
-The driver name and version. No commands can be written to this file.
-
-Sysfs interface version
------------------------
-
-sysfs driver attribute: interface_version
-
-Version of the thinkpad-acpi sysfs interface, as an unsigned long
-(output in hex format: 0xAAAABBCC), where:
- AAAA - major revision
- BB - minor revision
- CC - bugfix revision
-
-The sysfs interface version changelog for the driver can be found at the
-end of this document. Changes to the sysfs interface done by the kernel
-subsystems are not documented here, nor are they tracked by this
-attribute.
-
-Changes to the thinkpad-acpi sysfs interface are only considered
-non-experimental when they are submitted to Linux mainline, at which
-point the changes in this interface are documented and interface_version
-may be updated. If you are using any thinkpad-acpi features not yet
-sent to mainline for merging, you do so on your own risk: these features
-may disappear, or be implemented in a different and incompatible way by
-the time they are merged in Linux mainline.
-
-Changes that are backwards-compatible by nature (e.g. the addition of
-attributes that do not change the way the other attributes work) do not
-always warrant an update of interface_version. Therefore, one must
-expect that an attribute might not be there, and deal with it properly
-(an attribute not being there *is* a valid way to make it clear that a
-feature is not available in sysfs).
-
-Hot keys
---------
-
-procfs: /proc/acpi/ibm/hotkey
-sysfs device attribute: hotkey_*
-
-In a ThinkPad, the ACPI HKEY handler is responsible for comunicating
-some important events and also keyboard hot key presses to the operating
-system. Enabling the hotkey functionality of thinkpad-acpi signals the
-firmware that such a driver is present, and modifies how the ThinkPad
-firmware will behave in many situations.
-
-The driver enables the hot key feature automatically when loaded. The
-feature can later be disabled and enabled back at runtime. The driver
-will also restore the hot key feature to its previous state and mask
-when it is unloaded.
-
-When the hotkey feature is enabled and the hot key mask is set (see
-below), the driver will report HKEY events in the following format:
-
- ibm/hotkey HKEY 00000080 0000xxxx
-
-Some of these events refer to hot key presses, but not all.
-
-The driver will generate events over the input layer for hot keys and
-radio switches, and over the ACPI netlink layer for other events. The
-input layer support accepts the standard IOCTLs to remap the keycodes
-assigned to each hot key.
-
-The hot key bit mask allows some control over which hot keys generate
-events. If a key is "masked" (bit set to 0 in the mask), the firmware
-will handle it. If it is "unmasked", it signals the firmware that
-thinkpad-acpi would prefer to handle it, if the firmware would be so
-kind to allow it (and it often doesn't!).
-
-Not all bits in the mask can be modified. Not all bits that can be
-modified do anything. Not all hot keys can be individually controlled
-by the mask. Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually. The behaviour of
-the mask is, therefore, higly dependent on the ThinkPad model.
-
-Note that unmasking some keys prevents their default behavior. For
-example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
-
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver. They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
-
-procfs notes:
-
-The following commands can be written to the /proc/acpi/ibm/hotkey file:
-
- echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
- echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
- echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
- echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
- ... any other 8-hex-digit mask ...
- echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
-
-The procfs interface does not support NVRAM polling control. So as to
-maintain maximum bug-to-bug compatibility, it does not report any masks,
-nor does it allow one to manipulate the hot key mask when the firmware
-does not support masks at all, even if NVRAM polling is in use.
-
-sysfs notes:
-
- hotkey_bios_enabled:
- Returns the status of the hot keys feature when
- thinkpad-acpi was loaded. Upon module unload, the hot
- key feature status will be restored to this value.
-
- 0: hot keys were disabled
- 1: hot keys were enabled (unusual)
-
- hotkey_bios_mask:
- Returns the hot keys mask when thinkpad-acpi was loaded.
- Upon module unload, the hot keys mask will be restored
- to this value.
-
- hotkey_enable:
- Enables/disables the hot keys feature in the ACPI
- firmware, and reports current status of the hot keys
- feature. Has no effect on the NVRAM hot key polling
- functionality.
-
- 0: disables the hot keys feature / feature disabled
- 1: enables the hot keys feature / feature enabled
-
- hotkey_mask:
- bit mask to enable driver-handling (and depending on
- the firmware, ACPI event generation) for each hot key
- (see above). Returns the current status of the hot keys
- mask, and allows one to modify it.
-
- Note: when NVRAM polling is active, the firmware mask
- will be different from the value returned by
- hotkey_mask. The driver will retain enabled bits for
- hotkeys that are under NVRAM polling even if the
- firmware refuses them, and will not set these bits on
- the firmware hot key mask.
-
- hotkey_all_mask:
- bit mask that should enable event reporting for all
- supported hot keys, when echoed to hotkey_mask above.
- Unless you know which events need to be handled
- passively (because the firmware *will* handle them
- anyway), do *not* use hotkey_all_mask. Use
- hotkey_recommended_mask, instead. You have been warned.
-
- hotkey_recommended_mask:
- bit mask that should enable event reporting for all
- supported hot keys, except those which are always
- handled by the firmware anyway. Echo it to
- hotkey_mask above, to use.
-
- hotkey_source_mask:
- bit mask that selects which hot keys will the driver
- poll the NVRAM for. This is auto-detected by the driver
- based on the capabilities reported by the ACPI firmware,
- but it can be overridden at runtime.
-
- Hot keys whose bits are set in both hotkey_source_mask
- and also on hotkey_mask are polled for in NVRAM. Only a
- few hot keys are available through CMOS NVRAM polling.
-
- Warning: when in NVRAM mode, the volume up/down/mute
- keys are synthesized according to changes in the mixer,
- so you have to use volume up or volume down to unmute,
- as per the ThinkPad volume mixer user interface. When
- in ACPI event mode, volume up/down/mute are reported as
- separate events, but this behaviour may be corrected in
- future releases of this driver, in which case the
- ThinkPad volume mixer user interface semanthics will be
- enforced.
-
- hotkey_poll_freq:
- frequency in Hz for hot key polling. It must be between
- 0 and 25 Hz. Polling is only carried out when strictly
- needed.
-
- Setting hotkey_poll_freq to zero disables polling, and
- will cause hot key presses that require NVRAM polling
- to never be reported.
-
- Setting hotkey_poll_freq too low will cause repeated
- pressings of the same hot key to be misreported as a
- single key press, or to not even be detected at all.
- The recommended polling frequency is 10Hz.
-
- hotkey_radio_sw:
- if the ThinkPad has a hardware radio switch, this
- attribute will read 0 if the switch is in the "radios
- disabled" postition, and 1 if the switch is in the
- "radios enabled" position.
-
- This attribute has poll()/select() support.
-
- hotkey_report_mode:
- Returns the state of the procfs ACPI event report mode
- filter for hot keys. If it is set to 1 (the default),
- all hot key presses are reported both through the input
- layer and also as ACPI events through procfs (but not
- through netlink). If it is set to 2, hot key presses
- are reported only through the input layer.
-
- This attribute is read-only in kernels 2.6.23 or later,
- and read-write on earlier kernels.
-
- May return -EPERM (write access locked out by module
- parameter) or -EACCES (read-only).
-
- wakeup_reason:
- Set to 1 if the system is waking up because the user
- requested a bay ejection. Set to 2 if the system is
- waking up because the user requested the system to
- undock. Set to zero for normal wake-ups or wake-ups
- due to unknown reasons.
-
- This attribute has poll()/select() support.
-
- wakeup_hotunplug_complete:
- Set to 1 if the system was waken up because of an
- undock or bay ejection request, and that request
- was sucessfully completed. At this point, it might
- be useful to send the system back to sleep, at the
- user's choice. Refer to HKEY events 0x4003 and
- 0x3003, below.
-
- This attribute has poll()/select() support.
-
-input layer notes:
-
-A Hot key is mapped to a single input layer EV_KEY event, possibly
-followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
-code. An EV_SYN event will always be generated to mark the end of the
-event block.
-
-Do not use the EV_MSC MSC_SCAN events to process keys. They are to be
-used as a helper to remap keys, only. They are particularly useful when
-remapping KEY_UNKNOWN keys.
-
-The events are available in an input device, with the following id:
-
- Bus: BUS_HOST
- vendor: 0x1014 (PCI_VENDOR_ID_IBM) or
- 0x17aa (PCI_VENDOR_ID_LENOVO)
- product: 0x5054 ("TP")
- version: 0x4101
-
-The version will have its LSB incremented if the keymap changes in a
-backwards-compatible way. The MSB shall always be 0x41 for this input
-device. If the MSB is not 0x41, do not use the device as described in
-this section, as it is either something else (e.g. another input device
-exported by a thinkpad driver, such as HDAPS) or its functionality has
-been changed in a non-backwards compatible way.
-
-Adding other event types for other functionalities shall be considered a
-backwards-compatible change for this input device.
-
-Thinkpad-acpi Hot Key event map (version 0x4101):
-
-ACPI Scan
-event code Key Notes
-
-0x1001 0x00 FN+F1 -
-0x1002 0x01 FN+F2 IBM: battery (rare)
- Lenovo: Screen lock
-
-0x1003 0x02 FN+F3 Many IBM models always report
- this hot key, even with hot keys
- disabled or with Fn+F3 masked
- off
- IBM: screen lock
- Lenovo: battery
-
-0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
- semanthics, i.e. sleep-to-RAM).
- It is always generate some kind
- of event, either the hot key
- event or a ACPI sleep button
- event. The firmware may
- refuse to generate further FN+F4
- key presses until a S3 or S4 ACPI
- sleep cycle is performed or some
- time passes.
-
-0x1005 0x04 FN+F5 Radio. Enables/disables
- the internal BlueTooth hardware
- and W-WAN card if left in control
- of the firmware. Does not affect
- the WLAN card.
- Should be used to turn on/off all
- radios (bluetooth+W-WAN+WLAN),
- really.
-
-0x1006 0x05 FN+F6 -
-
-0x1007 0x06 FN+F7 Video output cycle.
- Do you feel lucky today?
-
-0x1008 0x07 FN+F8 IBM: toggle screen expand
- Lenovo: configure ultranav
-
-0x1009 0x08 FN+F9 -
- .. .. ..
-0x100B 0x0A FN+F11 -
-
-0x100C 0x0B FN+F12 Sleep to disk. You are always
- supposed to handle it yourself,
- either through the ACPI event,
- or through a hotkey event.
- The firmware may refuse to
- generate further FN+F4 key
- press events until a S3 or S4
- ACPI sleep cycle is performed,
- or some time passes.
-
-0x100D 0x0C FN+BACKSPACE -
-0x100E 0x0D FN+INSERT -
-0x100F 0x0E FN+DELETE -
-
-0x1010 0x0F FN+HOME Brightness up. This key is
- always handled by the firmware
- in IBM ThinkPads, even when
- unmasked. Just leave it alone.
- For Lenovo ThinkPads with a new
- BIOS, it has to be handled either
- by the ACPI OSI, or by userspace.
-0x1011 0x10 FN+END Brightness down. See brightness
- up for details.
-
-0x1012 0x11 FN+PGUP Thinklight toggle. This key is
- always handled by the firmware,
- even when unmasked.
-
-0x1013 0x12 FN+PGDOWN -
-
-0x1014 0x13 FN+SPACE Zoom key
-
-0x1015 0x14 VOLUME UP Internal mixer volume up. This
- key is always handled by the
- firmware, even when unmasked.
- NOTE: Lenovo seems to be changing
- this.
-0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
- key is always handled by the
- firmware, even when unmasked.
- NOTE: Lenovo seems to be changing
- this.
-0x1017 0x16 MUTE Mute internal mixer. This
- key is always handled by the
- firmware, even when unmasked.
-
-0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key
-
-0x1019 0x18 unknown
-.. .. ..
-0x1020 0x1F unknown
-
-The ThinkPad firmware does not allow one to differentiate when most hot
-keys are pressed or released (either that, or we don't know how to, yet).
-For these keys, the driver generates a set of events for a key press and
-immediately issues the same set of events for a key release. It is
-unknown by the driver if the ThinkPad firmware triggered these events on
-hot key press or release, but the firmware will do it for either one, not
-both.
-
-If a key is mapped to KEY_RESERVED, it generates no input events at all.
-If a key is mapped to KEY_UNKNOWN, it generates an input event that
-includes an scan code. If a key is mapped to anything else, it will
-generate input device EV_KEY events.
-
-Non hot-key ACPI HKEY event map:
-0x5001 Lid closed
-0x5002 Lid opened
-0x7000 Radio Switch may have changed state
-
-The above events are not propagated by the driver, except for legacy
-compatibility purposes when hotkey_report_mode is set to 1.
-
-0x2304 System is waking up from suspend to undock
-0x2305 System is waking up from suspend to eject bay
-0x2404 System is waking up from hibernation to undock
-0x2405 System is waking up from hibernation to eject bay
-
-The above events are never propagated by the driver.
-
-0x3003 Bay ejection (see 0x2x05) complete, can sleep again
-0x4003 Undocked (see 0x2x04), can sleep again
-0x5009 Tablet swivel: switched to tablet mode
-0x500A Tablet swivel: switched to normal mode
-0x500B Tablet pen insterted into its storage bay
-0x500C Tablet pen removed from its storage bay
-0x5010 Brightness level changed (newer Lenovo BIOSes)
-
-The above events are propagated by the driver.
-
-Compatibility notes:
-
-ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
-supported the input layer, and sent events over the procfs ACPI event
-interface.
-
-To avoid sending duplicate events over the input layer and the ACPI
-event interface, thinkpad-acpi 0.16 implements a module parameter
-(hotkey_report_mode), and also a sysfs device attribute with the same
-name.
-
-Make no mistake here: userspace is expected to switch to using the input
-layer interface of thinkpad-acpi, together with the ACPI netlink event
-interface in kernels 2.6.23 and later, or with the ACPI procfs event
-interface in kernels 2.6.22 and earlier.
-
-If no hotkey_report_mode module parameter is specified (or it is set to
-zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22
-and earlier, also allows one to change the hotkey_report_mode through
-sysfs. In kernels 2.6.23 and later, where the netlink ACPI event
-interface is available, hotkey_report_mode cannot be changed through
-sysfs (it is read-only).
-
-If the hotkey_report_mode module parameter is set to 1 or 2, it cannot
-be changed later through sysfs (any writes will return -EPERM to signal
-that hotkey_report_mode was locked. On 2.6.23 and later, where
-hotkey_report_mode cannot be changed at all, writes will return -EACES).
-
-hotkey_report_mode set to 1 makes the driver export through the procfs
-ACPI event interface all hot key presses (which are *also* sent to the
-input layer). This is a legacy compatibility behaviour, and it is also
-the default mode of operation for the driver.
-
-hotkey_report_mode set to 2 makes the driver filter out the hot key
-presses from the procfs ACPI event interface, so these events will only
-be sent through the input layer. Userspace that has been updated to use
-the thinkpad-acpi input layer interface should set hotkey_report_mode to
-2.
-
-Hot key press events are never sent to the ACPI netlink event interface.
-Really up-to-date userspace under kernel 2.6.23 and later is to use the
-netlink interface and the input layer interface, and don't bother at all
-with hotkey_report_mode.
-
-
-Bluetooth
----------
-
-procfs: /proc/acpi/ibm/bluetooth
-sysfs device attribute: bluetooth_enable
-
-This feature shows the presence and current state of a ThinkPad
-Bluetooth device in the internal ThinkPad CDC slot.
-
-Procfs notes:
-
-If Bluetooth is installed, the following commands can be used:
-
- echo enable > /proc/acpi/ibm/bluetooth
- echo disable > /proc/acpi/ibm/bluetooth
-
-Sysfs notes:
-
- If the Bluetooth CDC card is installed, it can be enabled /
- disabled through the "bluetooth_enable" thinkpad-acpi device
- attribute, and its current status can also be queried.
-
- enable:
- 0: disables Bluetooth / Bluetooth is disabled
- 1: enables Bluetooth / Bluetooth is enabled.
-
- Note: this interface will be probably be superseeded by the
- generic rfkill class, so it is NOT to be considered stable yet.
-
-Video output control -- /proc/acpi/ibm/video
---------------------------------------------
-
-This feature allows control over the devices used for video output -
-LCD, CRT or DVI (if available). The following commands are available:
-
- echo lcd_enable > /proc/acpi/ibm/video
- echo lcd_disable > /proc/acpi/ibm/video
- echo crt_enable > /proc/acpi/ibm/video
- echo crt_disable > /proc/acpi/ibm/video
- echo dvi_enable > /proc/acpi/ibm/video
- echo dvi_disable > /proc/acpi/ibm/video
- echo auto_enable > /proc/acpi/ibm/video
- echo auto_disable > /proc/acpi/ibm/video
- echo expand_toggle > /proc/acpi/ibm/video
- echo video_switch > /proc/acpi/ibm/video
-
-Each video output device can be enabled or disabled individually.
-Reading /proc/acpi/ibm/video shows the status of each device.
-
-Automatic video switching can be enabled or disabled. When automatic
-video switching is enabled, certain events (e.g. opening the lid,
-docking or undocking) cause the video output device to change
-automatically. While this can be useful, it also causes flickering
-and, on the X40, video corruption. By disabling automatic switching,
-the flickering or video corruption can be avoided.
-
-The video_switch command cycles through the available video outputs
-(it simulates the behavior of Fn-F7).
-
-Video expansion can be toggled through this feature. This controls
-whether the display is expanded to fill the entire LCD screen when a
-mode with less than full resolution is used. Note that the current
-video expansion status cannot be determined through this feature.
-
-Note that on many models (particularly those using Radeon graphics
-chips) the X driver configures the video card in a way which prevents
-Fn-F7 from working. This also disables the video output switching
-features of this driver, as it uses the same ACPI methods as
-Fn-F7. Video switching on the console should still work.
-
-UPDATE: There's now a patch for the X.org Radeon driver which
-addresses this issue. Some people are reporting success with the patch
-while others are still having problems. For more information:
-
-https://bugs.freedesktop.org/show_bug.cgi?id=2000
-
-ThinkLight control -- /proc/acpi/ibm/light
-------------------------------------------
-
-The current status of the ThinkLight can be found in this file. A few
-models which do not make the status available will show it as
-"unknown". The available commands are:
-
- echo on > /proc/acpi/ibm/light
- echo off > /proc/acpi/ibm/light
-
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
- ibm/dock GDCK 00000003 00000001 -- eject request
- ibm/dock GDCK 00000003 00000002 -- undocked
- ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
- Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
- echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
- echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
- ibm/bay MSTR 00000003 00000000 -- eject request
- ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
- Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
- echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
- echo eject > /proc/acpi/ibm/bay
- put the ThinkPad to sleep
- remove the drive
- resume from sleep
- cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-CMOS control
-------------
-
-procfs: /proc/acpi/ibm/cmos
-sysfs device attribute: cmos_command
-
-This feature is mostly used internally by the ACPI firmware to keep the legacy
-CMOS NVRAM bits in sync with the current machine state, and to record this
-state so that the ThinkPad will retain such settings across reboots.
-
-Some of these commands actually perform actions in some ThinkPad models, but
-this is expected to disappear more and more in newer models. As an example, in
-a T43 and in a X40, commands 12 and 13 still control the ThinkLight state for
-real, but commands 0 to 2 don't control the mixer anymore (they have been
-phased out) and just update the NVRAM.
-
-The range of valid cmos command numbers is 0 to 21, but not all have an
-effect and the behavior varies from model to model. Here is the behavior
-on the X40 (tpb is the ThinkPad Buttons utility):
-
- 0 - Related to "Volume down" key press
- 1 - Related to "Volume up" key press
- 2 - Related to "Mute on" key press
- 3 - Related to "Access IBM" key press
- 4 - Related to "LCD brightness up" key pess
- 5 - Related to "LCD brightness down" key press
- 11 - Related to "toggle screen expansion" key press/function
- 12 - Related to "ThinkLight on"
- 13 - Related to "ThinkLight off"
- 14 - Related to "ThinkLight" key press (toggle thinklight)
-
-The cmos command interface is prone to firmware split-brain problems, as
-in newer ThinkPads it is just a compatibility layer. Do not use it, it is
-exported just as a debug tool.
-
-LED control -- /proc/acpi/ibm/led
----------------------------------
-
-Some of the LED indicators can be controlled through this feature. The
-available commands are:
-
- echo '<led number> on' >/proc/acpi/ibm/led
- echo '<led number> off' >/proc/acpi/ibm/led
- echo '<led number> blink' >/proc/acpi/ibm/led
-
-The <led number> range is 0 to 7. The set of LEDs that can be
-controlled varies from model to model. Here is the mapping on the X40:
-
- 0 - power
- 1 - battery (orange)
- 2 - battery (green)
- 3 - UltraBase
- 4 - UltraBay
- 7 - standby
-
-All of the above can be turned on and off and can be made to blink.
-
-ACPI sounds -- /proc/acpi/ibm/beep
-----------------------------------
-
-The BEEP method is used internally by the ACPI firmware to provide
-audible alerts in various situations. This feature allows the same
-sounds to be triggered manually.
-
-The commands are non-negative integer numbers:
-
- echo <number> >/proc/acpi/ibm/beep
-
-The valid <number> range is 0 to 17. Not all numbers trigger sounds
-and the sounds vary from model to model. Here is the behavior on the
-X40:
-
- 0 - stop a sound in progress (but use 17 to stop 16)
- 2 - two beeps, pause, third beep ("low battery")
- 3 - single beep
- 4 - high, followed by low-pitched beep ("unable")
- 5 - single beep
- 6 - very high, followed by high-pitched beep ("AC/DC")
- 7 - high-pitched beep
- 9 - three short beeps
- 10 - very long beep
- 12 - low-pitched beep
- 15 - three high-pitched beeps repeating constantly, stop with 0
- 16 - one medium-pitched beep repeating constantly, stop with 17
- 17 - stop 16
-
-Temperature sensors
--------------------
-
-procfs: /proc/acpi/ibm/thermal
-sysfs device attributes: (hwmon "thinkpad") temp*_input
-
-Most ThinkPads include six or more separate temperature sensors but only
-expose the CPU temperature through the standard ACPI methods. This
-feature shows readings from up to eight different sensors on older
-ThinkPads, and up to sixteen different sensors on newer ThinkPads.
-
-For example, on the X40, a typical output may be:
-temperatures: 42 42 45 41 36 -128 33 -128
-
-On the T43/p, a typical output may be:
-temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
-
-The mapping of thermal sensors to physical locations varies depending on
-system-board model (and thus, on ThinkPad model).
-
-http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
-tries to track down these locations for various models.
-
-Most (newer?) models seem to follow this pattern:
-
-1: CPU
-2: (depends on model)
-3: (depends on model)
-4: GPU
-5: Main battery: main sensor
-6: Bay battery: main sensor
-7: Main battery: secondary sensor
-8: Bay battery: secondary sensor
-9-15: (depends on model)
-
-For the R51 (source: Thomas Gruber):
-2: Mini-PCI
-3: Internal HDD
-
-For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
-http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
-2: System board, left side (near PCMCIA slot), reported as HDAPS temp
-3: PCMCIA slot
-9: MCH (northbridge) to DRAM Bus
-10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
- card, under touchpad
-11: Power regulator, underside of system board, below F2 key
-
-The A31 has a very atypical layout for the thermal sensors
-(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
-1: CPU
-2: Main Battery: main sensor
-3: Power Converter
-4: Bay Battery: main sensor
-5: MCH (northbridge)
-6: PCMCIA/ambient
-7: Main Battery: secondary sensor
-8: Bay Battery: secondary sensor
-
-
-Procfs notes:
- Readings from sensors that are not available return -128.
- No commands can be written to this file.
-
-Sysfs notes:
- Sensors that are not available return the ENXIO error. This
- status may change at runtime, as there are hotplug thermal
- sensors, like those inside the batteries and docks.
-
- thinkpad-acpi thermal sensors are reported through the hwmon
- subsystem, and follow all of the hwmon guidelines at
- Documentation/hwmon.
-
-
-EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
-------------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
-This feature dumps the values of 256 embedded controller
-registers. Values which have changed since the last time the registers
-were dumped are marked with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
-EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
-EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80
-EC 0x30: 01 07 1a 00 30 04 00 00 *85 00 00 10 00 50 00 00
-EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00
-EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 *bc *02 *bc
-EC 0x60: *02 *bc *02 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0x70: 00 00 00 00 00 12 30 40 *24 *26 *2c *27 *20 80 *1f 80
-EC 0x80: 00 00 00 06 *37 *0e 03 00 00 00 0e 07 00 00 00 00
-EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xa0: *ff 09 ff 09 ff ff *64 00 *00 *00 *a2 41 *ff *ff *e0 00
-EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03
-EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a
-
-This feature can be used to determine the register holding the fan
-speed on some models. To do that, do the following:
-
- - make sure the battery is fully charged
- - make sure the fan is running
- - run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
-
-The first step makes sure various charging-related values don't
-vary. The second ensures that the fan-related values do vary, since
-the fan speed fluctuates a bit. The third will (hopefully) mark the
-fan register with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
-EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
-EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80
-EC 0x30: 01 07 1a 00 30 04 00 00 85 00 00 10 00 50 00 00
-EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00
-EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 bc 02 bc
-EC 0x60: 02 bc 02 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0x70: 00 00 00 00 00 12 30 40 24 27 2c 27 21 80 1f 80
-EC 0x80: 00 00 00 06 *be 0d 03 00 00 00 0e 07 00 00 00 00
-EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xa0: ff 09 ff 09 ff ff 64 00 00 00 a2 41 ff ff e0 00
-EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03
-EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a
-
-Another set of values that varies often is the temperature
-readings. Since temperatures don't change vary fast, you can take
-several quick dumps to eliminate them.
-
-You can use a similar method to figure out the meaning of other
-embedded controller registers - e.g. make sure nothing else changes
-except the charging or discharging battery to determine which
-registers contain the current battery capacity, etc. If you experiment
-with this, do send me your results (including some complete dumps with
-a description of the conditions when they were taken.)
-
-LCD brightness control
-----------------------
-
-procfs: /proc/acpi/ibm/brightness
-sysfs backlight device "thinkpad_screen"
-
-This feature allows software control of the LCD brightness on ThinkPad
-models which don't have a hardware brightness slider.
-
-It has some limitations: the LCD backlight cannot be actually turned on or
-off by this interface, and in many ThinkPad models, the "dim while on
-battery" functionality will be enabled by the BIOS when this interface is
-used, and cannot be controlled.
-
-On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
-has eight brightness levels, ranging from 0 to 7. Some of the levels
-may not be distinct. Later Lenovo models that implement the ACPI
-display backlight brightness control methods have 16 levels, ranging
-from 0 to 15.
-
-There are two interfaces to the firmware for direct brightness control,
-EC and CMOS. To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
-and CMOS. The driver tries to autodetect which interface to use.
-
-When display backlight brightness controls are available through the
-standard ACPI interface, it is best to use it instead of this direct
-ThinkPad-specific interface. The driver will disable its native
-backlight brightness control interface if it detects that the standard
-ACPI interface is available in the ThinkPad.
-
-The brightness_enable module parameter can be used to control whether
-the LCD brightness control feature will be enabled when available.
-brightness_enable=0 forces it to be disabled. brightness_enable=1
-forces it to be enabled when available, even if the standard ACPI
-interface is also available.
-
-Procfs notes:
-
- The available commands are:
-
- echo up >/proc/acpi/ibm/brightness
- echo down >/proc/acpi/ibm/brightness
- echo 'level <level>' >/proc/acpi/ibm/brightness
-
-Sysfs notes:
-
-The interface is implemented through the backlight sysfs class, which is
-poorly documented at this time.
-
-Locate the thinkpad_screen device under /sys/class/backlight, and inside
-it there will be the following attributes:
-
- max_brightness:
- Reads the maximum brightness the hardware can be set to.
- The minimum is always zero.
-
- actual_brightness:
- Reads what brightness the screen is set to at this instant.
-
- brightness:
- Writes request the driver to change brightness to the
- given value. Reads will tell you what brightness the
- driver is trying to set the display to when "power" is set
- to zero and the display has not been dimmed by a kernel
- power management event.
-
- power:
- power management mode, where 0 is "display on", and 1 to 3
- will dim the display backlight to brightness level 0
- because thinkpad-acpi cannot really turn the backlight
- off. Kernel power management events can temporarily
- increase the current power management level, i.e. they can
- dim the display.
-
-
-Volume control -- /proc/acpi/ibm/volume
----------------------------------------
-
-This feature allows volume control on ThinkPad models which don't have
-a hardware volume knob. The available commands are:
-
- echo up >/proc/acpi/ibm/volume
- echo down >/proc/acpi/ibm/volume
- echo mute >/proc/acpi/ibm/volume
- echo 'level <level>' >/proc/acpi/ibm/volume
-
-The <level> number range is 0 to 15 although not all of them may be
-distinct. The unmute the volume after the mute command, use either the
-up or down command (the level command will not unmute the volume).
-The current volume level and mute state is shown in the file.
-
-Fan control and monitoring: fan speed, fan enable/disable
----------------------------------------------------------
-
-procfs: /proc/acpi/ibm/fan
-sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
- pwm1_enable
-sysfs hwmon driver attributes: fan_watchdog
-
-NOTE NOTE NOTE: fan control operations are disabled by default for
-safety reasons. To enable them, the module parameter "fan_control=1"
-must be given to thinkpad-acpi.
-
-This feature attempts to show the current fan speed, control mode and
-other fan data that might be available. The speed is read directly
-from the hardware registers of the embedded controller. This is known
-to work on later R, T, X and Z series ThinkPads but may show a bogus
-value on other models.
-
-Fan levels:
-
-Most ThinkPad fans work in "levels" at the firmware interface. Level 0
-stops the fan. The higher the level, the higher the fan speed, although
-adjacent levels often map to the same fan speed. 7 is the highest
-level, where the fan reaches the maximum recommended speed.
-
-Level "auto" means the EC changes the fan level according to some
-internal algorithm, usually based on readings from the thermal sensors.
-
-There is also a "full-speed" level, also known as "disengaged" level.
-In this level, the EC disables the speed-locked closed-loop fan control,
-and drives the fan as fast as it can go, which might exceed hardware
-limits, so use this level with caution.
-
-The fan usually ramps up or down slowly from one speed to another, and
-it is normal for the EC to take several seconds to react to fan
-commands. The full-speed level may take up to two minutes to ramp up to
-maximum speed, and in some ThinkPads, the tachometer readings go stale
-while the EC is transitioning to the full-speed level.
-
-WARNING WARNING WARNING: do not leave the fan disabled unless you are
-monitoring all of the temperature sensor readings and you are ready to
-enable it if necessary to avoid overheating.
-
-An enabled fan in level "auto" may stop spinning if the EC decides the
-ThinkPad is cool enough and doesn't need the extra airflow. This is
-normal, and the EC will spin the fan up if the various thermal readings
-rise too much.
-
-On the X40, this seems to depend on the CPU and HDD temperatures.
-Specifically, the fan is turned on when either the CPU temperature
-climbs to 56 degrees or the HDD temperature climbs to 46 degrees. The
-fan is turned off when the CPU temperature drops to 49 degrees and the
-HDD temperature drops to 41 degrees. These thresholds cannot
-currently be controlled.
-
-The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
-certain conditions are met. It will override any fan programming done
-through thinkpad-acpi.
-
-The thinkpad-acpi kernel driver can be programmed to revert the fan
-level to a safe setting if userspace does not issue one of the procfs
-fan commands: "enable", "disable", "level" or "watchdog", or if there
-are no writes to pwm1_enable (or to pwm1 *if and only if* pwm1_enable is
-set to 1, manual mode) within a configurable amount of time of up to
-120 seconds. This functionality is called fan safety watchdog.
-
-Note that the watchdog timer stops after it enables the fan. It will be
-rearmed again automatically (using the same interval) when one of the
-above mentioned fan commands is received. The fan watchdog is,
-therefore, not suitable to protect against fan mode changes made through
-means other than the "enable", "disable", and "level" procfs fan
-commands, or the hwmon fan control sysfs interface.
-
-Procfs notes:
-
-The fan may be enabled or disabled with the following commands:
-
- echo enable >/proc/acpi/ibm/fan
- echo disable >/proc/acpi/ibm/fan
-
-Placing a fan on level 0 is the same as disabling it. Enabling a fan
-will try to place it in a safe level if it is too slow or disabled.
-
-The fan level can be controlled with the command:
-
- echo 'level <level>' > /proc/acpi/ibm/fan
-
-Where <level> is an integer from 0 to 7, or one of the words "auto" or
-"full-speed" (without the quotes). Not all ThinkPads support the "auto"
-and "full-speed" levels. The driver accepts "disengaged" as an alias for
-"full-speed", and reports it as "disengaged" for backwards
-compatibility.
-
-On the X31 and X40 (and ONLY on those models), the fan speed can be
-controlled to a certain degree. Once the fan is running, it can be
-forced to run faster or slower with the following command:
-
- echo 'speed <speed>' > /proc/acpi/ibm/fan
-
-The sustainable range of fan speeds on the X40 appears to be from about
-3700 to about 7350. Values outside this range either do not have any
-effect or the fan speed eventually settles somewhere in that range. The
-fan cannot be stopped or started with this command. This functionality
-is incomplete, and not available through the sysfs interface.
-
-To program the safety watchdog, use the "watchdog" command.
-
- echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
-
-If you want to disable the watchdog, use 0 as the interval.
-
-Sysfs notes:
-
-The sysfs interface follows the hwmon subsystem guidelines for the most
-part, and the exception is the fan safety watchdog.
-
-Writes to any of the sysfs attributes may return the EINVAL error if
-that operation is not supported in a given ThinkPad or if the parameter
-is out-of-bounds, and EPERM if it is forbidden. They may also return
-EINTR (interrupted system call), and EIO (I/O error while trying to talk
-to the firmware).
-
-Features not yet implemented by the driver return ENOSYS.
-
-hwmon device attribute pwm1_enable:
- 0: PWM offline (fan is set to full-speed mode)
- 1: Manual PWM control (use pwm1 to set fan level)
- 2: Hardware PWM control (EC "auto" mode)
- 3: reserved (Software PWM control, not implemented yet)
-
- Modes 0 and 2 are not supported by all ThinkPads, and the
- driver is not always able to detect this. If it does know a
- mode is unsupported, it will return -EINVAL.
-
-hwmon device attribute pwm1:
- Fan level, scaled from the firmware values of 0-7 to the hwmon
- scale of 0-255. 0 means fan stopped, 255 means highest normal
- speed (level 7).
-
- This attribute only commands the fan if pmw1_enable is set to 1
- (manual PWM control).
-
-hwmon device attribute fan1_input:
- Fan tachometer reading, in RPM. May go stale on certain
- ThinkPads while the EC transitions the PWM to offline mode,
- which can take up to two minutes. May return rubbish on older
- ThinkPads.
-
-hwmon driver attribute fan_watchdog:
- Fan safety watchdog timer interval, in seconds. Minimum is
- 1 second, maximum is 120 seconds. 0 disables the watchdog.
-
-To stop the fan: set pwm1 to zero, and pwm1_enable to 1.
-
-To start the fan in a safe mode: set pwm1_enable to 2. If that fails
-with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
-would be the safest choice, though).
-
-
-EXPERIMENTAL: WAN
------------------
-
-procfs: /proc/acpi/ibm/wan
-sysfs device attribute: wwan_enable
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
-This feature shows the presence and current state of a W-WAN (Sierra
-Wireless EV-DO) device.
-
-It was tested on a Lenovo Thinkpad X60. It should probably work on other
-Thinkpad models which come with this module installed.
-
-Procfs notes:
-
-If the W-WAN card is installed, the following commands can be used:
-
- echo enable > /proc/acpi/ibm/wan
- echo disable > /proc/acpi/ibm/wan
-
-Sysfs notes:
-
- If the W-WAN card is installed, it can be enabled /
- disabled through the "wwan_enable" thinkpad-acpi device
- attribute, and its current status can also be queried.
-
- enable:
- 0: disables WWAN card / WWAN card is disabled
- 1: enables WWAN card / WWAN card is enabled.
-
- Note: this interface will be probably be superseeded by the
- generic rfkill class, so it is NOT to be considered stable yet.
-
-Multiple Commands, Module Parameters
-------------------------------------
-
-Multiple commands can be written to the proc files in one shot by
-separating them with commas, for example:
-
- echo enable,0xffff > /proc/acpi/ibm/hotkey
- echo lcd_disable,crt_enable > /proc/acpi/ibm/video
-
-Commands can also be specified when loading the thinkpad-acpi module,
-for example:
-
- modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
-
-Enabling debugging output
--------------------------
-
-The module takes a debug parameter which can be used to selectively
-enable various classes of debugging output, for example:
-
- modprobe ibm_acpi debug=0xffff
-
-will enable all debugging output classes. It takes a bitmask, so
-to enable more than one output class, just add their values.
-
- Debug bitmask Description
- 0x0001 Initialization and probing
- 0x0002 Removal
-
-There is also a kernel build option to enable more debugging
-information, which may be necessary to debug driver problems.
-
-The level of debugging information output by the driver can be changed
-at runtime through sysfs, using the driver attribute debug_level. The
-attribute takes the same bitmask as the debug module parameter above.
-
-Force loading of module
------------------------
-
-If thinkpad-acpi refuses to detect your ThinkPad, you can try to specify
-the module parameter force_load=1. Regardless of whether this works or
-not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
-
-
-Sysfs interface changelog:
-
-0x000100: Initial sysfs support, as a single platform driver and
- device.
-0x000200: Hot key support for 32 hot keys, and radio slider switch
- support.
-0x010000: Hot keys are now handled by default over the input
- layer, the radio switch generates input event EV_RADIO,
- and the driver enables hot key handling by default in
- the firmware.
-
-0x020000: ABI fix: added a separate hwmon platform device and
- driver, which must be located by name (thinkpad)
- and the hwmon class for libsensors4 (lm-sensors 3)
- compatibility. Moved all hwmon attributes to this
- new platform device.
-
-0x020100: Marker for thinkpad-acpi with hot key NVRAM polling
- support. If you must, use it to know you should not
- start an userspace NVRAM poller (allows to detect when
- NVRAM is compiled out by the user because it is
- unneeded/undesired in the first place).
-0x020101: Marker for thinkpad-acpi with hot key NVRAM polling
- and proper hotkey_mask semanthics (version 8 of the
- NVRAM polling patch). Some development snapshots of
- 0.18 had an earlier version that did strange things
- to hotkey_mask.
-
-0x020200: Add poll()/select() support to the following attributes:
- hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
- For more information about this driver see
- <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
+ For more information about this driver see
+ <file:Documentation/laptops/thinkpad-acpi.txt> and
+ <http://ibm-acpi.sf.net/> .
This driver was formerly known as ibm-acpi.
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff